Dirt 3 license key.txt download - Free Activators

05.10.2021 4 Comments

dirt 3 license key.txt download  - Free Activators

Online is the best platform for getting this tool because it is offering it free of cost. If you are using this crack tool then people might get. pălărie om de zapada Numi Dirt 3 Product Key Generator Free Download Download DiRT Rally Crack + License Key 2021 | Full Activation Key. Find breaking Windsor & COVID-19 news, live coverage, weather, traffic, in-depth reporting, sports, local events and video.

You can watch a thematic video

Dirt 3 Crack key Pc

Dirt 3 license key.txt download - Free Activators -

Download DiRT Rally Crack + License Key {2021} Full Free Download

Download DiRT Rally Crack + License Key Free (2021) Full Edition

Download DiRT Rally Crack + License Key {2021} Full Free Download

Download the full version of DiRT Rally Crack by Codemasters Racing Studio of Feral Interactive (Mac) and published by Codemasters of Feral Interactive (Mac). Released on April 1, 2015. Get the full version of DiRT 3, which is the latest version of DiRT 3 off-road racing. This version will soon add more content and be enhanced through Steamworks integration, including achievements, leaderboards, and Steam Cloud Keeps. Race in the storm, rain, and dirt, and take part in the exciting night race, which has the most content listed.

Inspired by Ken Block’s incredible freestyle driving experience, show yourself in a beautiful new Gymkhana style, and then upload your best running results directly to Video Sharing Company! A PC with an iconic demo car can serve the sport for 50 years. From the standard Audi Quattro to the 2010 Ford Fiesta WRC, w can enjoy all sports styles in split-screen and ambitious online multiplayer games. Like a licensed rally star, you will experience intense motor racing in the forests of Michigan, the scenic Finnish highways, and the state parks of Kenya.

Dirt 3 Product Key & Activation Key:

Tissue 3G Biker 2014 For Earth 3 Sliding Cracks Direct Download Carpet Scimitar 3 Sliding Cracks More complete dirt 3 Sliding w can download cracks by downloading. VODAFONE CARBIDE 2014 FOR DIRT 3 dust collecting area The crack in the Dirt Dirt 3 dust collecting area directly releases the muscle TRIC.

They messed up 3 straws, cracked them, and released them directly. To change this plan, the Earth showed the unknown release of 3 slide cracks on November 12, 2007. Poisoning. To find the creation situation where 3 slide cracks will break, please download the charming laboratory, the charming Booty Gal; if so, The Polytechnic Institute will have a standard that you are from Brighton, there are 3 cracked grass slopes and dust, which w can download directly.

Download DiRT Rally Crack + License Key {2021} Full Free Download

Main Features:

  • The eight impressive assembly stages of the Monte Carlo Rally package highlight the dramatic hills, homes, and forks in the cold mountain roads. Travel across the Alps and conquer the spectacular Col de Turini.
  • X Games Asia Track Set-Four brand new routes, a pair of new tracks across Shibuya, the neon center of central Tokyo, where the spectacular mudflats of Rallycross are formed under very high buildings.
  • The Power and Glory car kit includes five cars, including BMW M3 Rally, Lancia Delta S4, Ford Focus ST Rallycross, Scion TC, and Chevrolet Camaro SSX Concept variety of options.

Installation Precautions in Download the full version of DiRT Rally Crack:

  • Use WinRAR or equivalent to delete files.
  • Burn or upload .iso files.
  • Install the sports version, and enter any when prompted.
  • Put the entire contents of the FiGHTCLUB folder on the DVD on the playback installation paper and overwrite it when prompted.
  • Once <Go to the ProfileImport.exe file>. It makes five spaces to save the game form. If you have previously saved forms (DiRT 3) on your PC, w will retain the first three. (If you have other requirements, please manually back up the saved form before implementing this migration, and then enter it below.

Dirt 3 System Requirments:

Minimum Requirements:
OSWin XP/7/8/10 32
CPUCore 3 Duo E6700 2.66GHz,  Athlon 64 X2 Dual Core Plus5600
RAM1 GB
GPUGeForce 8600 GTS / Radeon HD 2600 Pro
HDD20 GB

 

Recommended Requirements:
OSWin 7/ 8/10 32 Bit
CPUCore i8-860 Quad 2.85GHz, Phenom II X4 B50
RAM 2 GB
GPUGeForce GTX 280 / Radeon HD 4890
HDD20 GB

How To Crack:

  • Firstly, Download The Crack From The Given Below Connection.
  • Then Install The Settings.
  • Tick On Active Button.
  • That’s All.
  • Now Enjoy It.
Источник: https://bablupc.com/download-dirt-rally-crack/

Dirt 3 Full KEY GENERATOR Image


A 'Complete Edition' of the game was announced by Codemasters on 9 February 2012,[14] with a trailer released on YouTube on 8 March 2012.[15] Consisting of the game and its associated DLC packaged together, the Complete Edition adds several tracks and vehicles. Serial Key Dirt 3 (stylised DiRT 3) is a rallying video game and the third in the Dirt series of the Colin McRae Rally series, developed and published by Codemasters.

Full However, the "Colin McRae" tag has been completely removed from this iteration (having previously been removed from only American versions of previous games in the series). Crack In September 2011, there were reports that a network security problem on the website of an AMD promo had resulted in the loss of 3 million Dirt 3 keys to the public for use via the Steam platform that have then been posted in various places around the internet. Key Generator Winning these events gives the player prize money, which can be spent buying new cars or upgrading existing ones, and unlocks further races. Patch The game was released in Europe and North America on 24 May 2011, and two days later in Australia for Microsoft Windows, PlayStation 3 and Xbox 360.

Gameplay modes can be classified as Racing, Demolition, Hoonigan or Party. It was released Friday 9 March in Europe, and 20 March in North America. The Japanese version of Dirt 3 was released on 25 August 2011. The player is entered in a series of "Tour" events, offering a range of races and tournaments to compete in. Dirt: Showdown removes several of the gameplay modes featured in its predecessor Dirt 3, and introduces new ones. Upon the successful completion of the series final, the next difficulty setting is unlocked, featuring faster opponents and longer races.

Download ButtonDownload Button


free download download serial key download with serial key "serial key generator download" "serial key direct download" "serial number keygen pc" "license key" "serial number" osx health cheat "crack free download for windows 7" Dirt 3 Full KEY GENERATOR "download with serial key generator" cracker tool "serial number key generator free download" 64bit x64 file crack and patch crack file free download 2013 "full download" serial key download "license key rar" latest. "demo finder "license key download" crack patch exe"

Источник: http://freegamecrackserialkey.blogspot.com/2014/04/dirt-3-full-key-generator.html

license key

Model 2 (designed as [PROTOTYPE2]) is an action and adventure video game open for 2012. Developed by Canadian studio Radical Entertainment and published by Activision, it is a sequel to the 2009 model. The game was announced at the 2010 Spike VGA Awards. The PlayStation 4 and Xbox One editions were released on July 14, 2015, along with the prototype Biohazard Bundle. Separate versions of the games became available in August 2015.
Thigh strength exercises – Movement to strengthen the thighs proscalpin weight room in périgueux, fire station – (dordogne).
The game includes the new protagonist, James Heller, as he seeks to destroy the Blacklight virus. The story is a vendetta story, where Heller wants to kill Alex Mercer, the protagonist of the prototype after his family was killed in the outbreak of the BlackBerry virus. While the game has been one of the biggest sellers for a while, its sales will eventually reduce the size of its developer.
The second model received “generally favorable reviews” on all platforms except the Xbox 360 edition, which received “average” reviews, according to the Metacritic Collection Review site. PlanetXbox360 described the game as “a superb sequel beyond the original”.   At the time of his departure, creator Dan Harmon considered the second model a great game.

Prototype 2 License Key Cd

To the roof lip and then move with a click from the right operator to the sliding will take you to the next surface. ” Mania awarded the game a score out Ten, calling it “a decent game. It’s less frustrating than the first, with more customization options, better abilities and more things to do. Lack of Barry Baby P. It is worth a look if you like the first game, or if you love games The Guardian gave the Xbox 360 a similar score to four out of five stars and stated “very purity of the target” which makes the game like a kill box for beautiful games that makes it uninvolved on any level that does not fall and is scattered by stray members.

So, while the Prototype 2 destruction simulator scores extremely high, there is a chance, like small children in the dirt, you’ll get bored after a short while and wander.  Digital Fix gave the same version of the console as seven out of ten, and said, “It’s not the AAA address he wants to be, but this said he is far from bargaining for feed, falling somewhere just above the middle.” “Out of three and a half stars out of five, she called it“ an action-packed adventure with fun fighting, but you get a little high here and there. ”[36] Digital Spy gave three stars out of five and said it“ excels as a field killed in an open world, where you can attract anyone who leaves in bloody and courageous waterfalls. Underneath, it is a normal action game characterized by mundane tasks that are not a real challenge, wrapped in a story that lacks substance and originality.

But those players who can stop their minds and just enjoy the ride will find the Prototype 2 flavor of blood-filled action a rather guilty pleasure. [35] Similarly, Metro UK gave a score of six out of ten and said, “Small doses Prototype 2 is quite a fun game, but in the end, because Heller and Mercer don’t care about anyone else you can never care about.”

Prototype 2 License Key Cd

Model 2 (designed as [PROTOTYPE2]) is an open, global action game published by Activision and developed by Radical Entertainment. Prototype 2 is a direct sequel to Prototype and was announced at the 2010 Spike Video Games Awards.

Prototype 2 events take place in New York City, now known as New York Zero (NYZ), after Sgt. James Heller in his quest to destroy Alex Mercer, having lost everything and everyone loved the Blacklight virus.

Prototype 2 License Key Cd

Fourteen months after Blacklight was rescued as Alex Mercer, he saved the injured New York in his quest for redemption, Sergeant. James Heller returns to the city, once his home, after being sacked from the Middle East war. He discovers that his wife and daughter have been killed, forcing him into a cycle of sadness and anger. He goes out on a suicide mission in the heart of the Red Zone to die at work and take as many atrocities as possible with him.

In one of these missions to the Red Zone Heller team, he was killed and confronted by Alex Mercer. A battle ensued between the two, which led Heller to Mercer several times to be dumped. Like his actions, Mercer Heller infects his Blacklight severity because he believes he is the perfect lieutenant in spreading the virus beyond Manhattan.  Heller wakes up at a research facility in Gentek and can escape. He faces Mercer, who managed to convince Heller that he was not responsible for the outbreak. Blackwatch and Gentek were using New York to test biological weapons. Mercer claims that he will not be able to take down the two factions without help.

Main features

  • Always back up files that are overwritten by the File Archive, as the original files are usually required to update the game to a newer version or to play online!
  • Some CD-ROM / hard EXE files run in Single Player mode but are discovered to be modified when you try to play online. When this happens, use the original EXE to play online, otherwise, you may find yourself banned for the game!
  • When using Static Files, be sure to use a Firewall that controls outbound traffic, because some games connect again to report the use of these modified files!
  • Some native games do not work when you install a specific application, such as DAEMON Tools. In most cases, using a hard CD or EXE fixes this problem!

System Requirements

  • Intel Core 2 Duo 2.2 GHz / AMD Athlon 64 x 2.0 GHz
  • Graphics 64 MB VRAM – NVIDIA
  • GeForce 6800 / ATI Radeon X1300Memory2
  • GB RAM12 GB Disk Space HDSystemWindows XP

How to crack:

  • 1. First download and open Key Generator.
  • 2. Click “Create CD Key” and wait a few seconds.
  • 3. Now copy the key.
  • 4. When the game activation window appears, just enter this key.
  • 5. Follow the on-screen instructions to complete the process.
  • 6. Have fun

Serial Keys

  • H7645YH-737824Y-HJ823Y8
  • HU23T8I-O839J9U-G7823YH
  • HIG378Y7-JKY237-O823Y89H
Источник: https://licensekey.co/games/prototype-cd/

Windows 7 Professional product key is currently the excellent and general model of Windows for the laptop device. It gives customers the easy interface to make use of and perform its software program. Many people use unregistered version of Windows 7 at the Windows Computer. But while the use of Windows 7 Professional Product Key without activation, an individual might also use that Windows for the reasonable time. It’s been valued and appreciated with the aid of an outstanding variety of peoples everywhere in the world. This operating machine could be very well ideal for activation of your non-public computer at all. It is now accessible working device fortunately made available from Microsoft. There is no hesitation Microsoft is one of the leading institutions at the globe. It offers the satisfactory services by supplying the up to date model of OS on an everyday basis. It receives a great deal safety software for everybody.

Windows 7 Professional Product Key is pinned up as one of the OS this is suitable for the sector which became released by using Microsoft. Microsoft produced Windows 7, 3 years after Vista. It’s comfortable, clean and operating that is amazingly stylish handing over an entire lot of new capabilities which are visible. Windows 7 crack has six versions, come to be suitable. But maximum user’s best desire to choose from variations.

Windows 7 Product Key information and lightweight software where it verifies the product information based entirely on the important thing moved into through customers. kmspico may be applied to activate the same release, however, now not for the unique version of Windows 7. You should set off the product’s key on both 32 and 64 bit of Windows Operating-System. To make clear your whole worries through this newsletter, you could have the proper facts about the products key activation in your reputable Windows operating device.

If you’re the university student, we exceedingly pick out never to shop for any product key because such product secrets are very costly and Microsoft Windows 7 product keys are highly-priced in place of cheap for students. But if you agree with you’re able the genuine Windows 7 product key then make sure that you reach the proper destination to accumulate the Windows 7 Professional Product Key.

Features:

  • Easily report it shows to view for later use.
  • No person can look at, pause or rewind Television suggests.
  • The purchaser can create a mobile network.
  • Find almost whatever on your computer, immediately.
  • Takes a frustration out of writing information and printers at the community.
  • It’s the premium version of Windows 7 directed at you free of charge.
  • Obtainable in each 32-bit and 64-bit.
  • No dependence on the high requirement of installing Windows 7 Free of the cost.
  • Mixes cool photos with useful ways to govern your computing device.
  • The First form of defense towards adware and spyware and unwanted software program.
  • Quick sleep, continue & USB device analysis, fewer recollection wishes.
  • Keep intruders (hackers or harmful software program) from getting again in.
  • Redecorate your laptop with amusing new topics or user devices.
  • Anon the spot way to resize and compare Windows in your computing device.
  • Better thumbnail previews & icons, and plenty more ways to personalize.

System Requirements:

If you desire to run Windows 7 to your laptop or PC, here’s what it calls for:

  • CPU: 1 GHz or faster
  • RAM: 1 GB
  • Hard disk Space: 14 GB available

Windows 7 Professional Product Key

VQB3X-Q3KP8-WJ2H8-R6B6D-7QJB7

2QDBX-9T8HR-2QWT6-HCQXJ-9YQTR

38JTJ-VBPFW-XFQDR-PJ794-8447M

V3Y2W-CMF9W-PGT9C-777KD-32W74

7JQWQ-K6KWQ-BJD6C-K3YVH-DVQJG

3743C-T6892-B4PHM-JHFKY-4BB7W

8YDX9-B7MMG-82XD9-V88G9-MR92T

4FG99-BC3HD-73CQT-WMF7J-3Q6C9

38GRR-KMG3D-BTP99-TC9G4-BBDJJ

27GBM-Y4QQC-JKHXW-D9W83-FJQo

4G3GR-J6JDJ-D96PV-T9B9D-M8X2Q

TD77M-HH38J-FBCB8-8QX7Y-P2QH3

VQB3X-Q3KP8-WJ2H8-R6B6D-7QJB7

Steps to Activate Windows 7 Professional Product Key:

  1. First download the setup by clicking the download button.
  2. Draw out the archive with WinRAR.
  3. Then install the Windows 7 Professional as administrator.
  4. Copy and paste the Windows 7 Professional Product Key when it asks to register or activate Windows.
  5. It’ll be genuinely activated.
  6. You should use all high-quality capabilities.
  7. Enjoy its all elements for a lifetime.

some latest product key lists of windows 7

windows 7 product keyYC7DK-G2NP3-2QQC3-J6H88-GVGXT
windows 7 ultimate product keyKBKQT-2NMXY-JJWGP-M62JB-92CD4
product key for windows 7FN8TT-7WMH6-2D4X9-M337T-2342K
windows 7 professional product key6NTH3-CW976-3G3Y2-JK3TX-8QHTT
windows 7 ultimate product key freeC2FG9-N6J68-H8BTJ-BW3QX-RM3B3
windows 7 ultimate product key generatorJ484Y-4NKBF-W2HMG-DBMJC-PGWR7

windows 7 ultimate product key generator

Источник: https://windows7activators.com/windows-7-professional-product-key-for-free/
.how to Download
  1. Choose the offer you are interested in
  2. Complete the survey with valid information
  3. When the download is complete, it starts automatically!

.features Gameshosts

.client
secure

.easy to
use

.unlimited
downloads

.about Gameshosts

GamesHost is a professional and reliable platform where we provide game codes and keys for games. We definitely have over long experience and we can pass it on to our clients. Here at GamesHost we mainly specialize in providing Keys - so we can offer the fastest delivery thanks to our unique automatic delivery system.

Copyright © 2021 Gameshosts.
All Right Reserved.

Источник: https://gameshosts.com/download/DiRTRally-LicenseKey

Wm048521 Helix 6000 Iec Def

Helix™
WM048521

Rev 07 - PRELIMINARY

AE
Read this manual before starting any installation, service, or maintenance work
Fuel dispensers contain both electrical components and a hazardous, flammable and poten-
tially explosive liquid. Failure to follow the below precautions and the Warning and Caution
instructions in this manual may result in serious injury. In addition, it is your responsibility to
follow all rules, codes, regulations, and laws that apply to your location and type of work being
performed.

Safety precautions
Make sure that ALL power to the dispenser is turned OFF before opening the cabinet or
starting work. Physically lock, restrict access to, and/or tag the circuit breakers you turn off.
In addition, be sure to trip (close) all emergency valves under the dispenser (if installed)
BEFORE you begin.
Make sure that you locate the facility’s emergency shut-off button, and know how to turn OFF
power to the dispenser and submersible pumps (if any) in an emergency.
Never allow a leaking pump to run! Use appropriate measures to clean up any fuel on the
forecourt, and ensure that any leaks or issues that could cause a leak are attended to and
repaired immediately.

Indicators and notations

Note!
Indicates extra information or tip.

NOTICE!

Highlights an essential element of a procedure to


help ensure accuracy, completeness, and appro-
priate performance.

CAUTION!

Indicates a potentially hazardous situation, which


if not avoided, could result in personal (non-lethal)
injury or equipment damage.

WM048521 Rev 07 - PRELIMINARY 11/2014


WARNING!

INDICATES A POTENTIALLY HAZARDOUS SIT-


UATION, WHICH, IF NOT AVOIDED COULD
RESULT IN DEATH OR SERIOUS INJURY.

DANGER!

INDICATES A HAZARDOUS SITUATION, WHICH,


IF NOT AVOIDED, WILL RESULT IN DEATH OR
SERIOUS INJURY.

WM048521 Rev 07 - PRELIMINARY 11/2014


Table of Contents

Table of Contents

1 Introduction ......................................................................................................... 3
1.1 Dispensers Covered ............................................................................... 3
1.1.1 Wayne iGEM™ Computer Software ................................................................. 5
1.1.2 Determining Dispenser Sides A & B ................................................................. 5
1.1.3 Parts of the Pump ............................................................................................. 6
1.1.4 Product Liability ................................................................................................. 7
1.1.5 Intended Use ..................................................................................................... 7
1.1.6 What is DEF? .................................................................................................... 8
2 Important Safety Items ........................................................................................ 9
2.1 Safety Items You Should Know ............................................................... 9
2.2 Classification Schemes ........................................................................... 9
2.3 Portable Tanks and Containers ............................................................... 12
2.4 Health Note ............................................................................................. 12
2.5 Safety Precautions - Operation and Maintenance .................................. 12
2.6.1 Health and Safety Regulations .......................................................................... 12
2.6.2 Health and Safety Regulations - DEF ............................................................... 13
2.7 Dispenser Safety Features ..................................................................... 14
3 Operation ............................................................................................................ 15
3.1 Introduction ............................................................................................. 15
3.2 How to Get Service On Your Dispenser .................................................. 15
3.3 Infrared Remote Control ......................................................................... 15
3.4 Basic Dispenser Requirements ............................................................... 16
3.5 Programming Functions .......................................................................... 16
3.6 Access to Functions ................................................................................ 17
3.7 Annunciator Operation Check ................................................................. 18
3.8 Set Clock Function (F 02) ....................................................................... 18
3.9 Exit Function (F00) .................................................................................. 19
3.10 Password Change (F33) ......................................................................... 20
3.11 Filling Modes (F01) ................................................................................. 21
3.12 Setting Unit Prices .................................................................................. 22
3.12.1 F03 - Set Side A Unit Prices ............................................................................. 22
3.12.2 F04 - Set Side B Unit Prices ............................................................................. 23
3.12.3 Changing the Unit Price (F03) ........................................................................... 23
3.13 Authorizing the Dispenser ....................................................................... 25
3.14 Disable Stand-alone Operation ............................................................... 25
3.15 Operating the Dispenser ......................................................................... 26
3.16 Initial Delivery .......................................................................................... 26
3.17 Restarting After Power Failure or Shutdown .......................................... 27
3.18 Cycling Power to Clear Faults ................................................................. 27
3.19 Error Codes ............................................................................................. 27
3.20 Resetting After All Stop ........................................................................... 28

WM048521 Rev 07 - PRELIMINARY 11/2014 1


Table of Contents

3.21 Electronic Totalizer Readings .................................................................. 29


3.21.1 Totalizer Volume Readings by Meter Position ................................................... 29
3.21.2 Electro-Mechanical Totalizer Operation ............................................................ 29
4 Operator Maintenance ........................................................................................ 31
4.1 Hose and Hose Retractor ....................................................................... 31
4.2 Filter / Strainer - Remote ......................................................................... 31
4.3 Dispenser cleaning ................................................................................. 33
4.4 Meter Maintenance ................................................................................. 33

Appendices
A Dissasembly - Recycling ..................................................................................... 35
A.1 Empty the fuel out of the pump ............................................................... 35
A.2 Dispenser recycling ................................................................................. 35
B Declaration of Conformance ............................................................................... 36
C Glossary of Terms and Acronyms ....................................................................... 37

2 WM048521 Rev 07 - PRELIMINARY 11/2014


1 Introduction

1 Introduction

This manual covers general user information on the operation and maintenance of the Wayne®
Helix™ fuel dispenser models outlined in Section 1.1 Dispensers Covered, on page 3.
Computer function settings that are necessary for Helix dispenser operation, such as unit
prices and fueling point ID’s, are also included in this manual. If additional information on
function settings and statistics is required, refer to the Helix Dispenser Service manual
(WM048523).
The following items are required for the operation and maintenance of Helix dispensers:
• Infrared remote control (IR remote or IRC) - Wayne part number (p/n) WM002290
• Printer door key - DHW1 key
• Lower bezel door and sliding bezel tray keys - DW2 key
• Hydraulic door key - Wayne p/n WU007681
Any questions concerning operation of the dispenser that are not covered in this manual
should be referred to your local service provider.

1.1 Dispensers Covered


This manual applies to the following style of Helix dispenser that has been approved by IEC:
• C-Style, Wayne Helix™ 6000 fuel dispenser
• Your dispenser activation is Auto ON
• Your dispenser has a DEF (Diesel Exhaust Fluid) pump
Refer to Figure 1.1 to determine model attributes defined in the model number of the dispenser.
The dispenser model number can be located on the dispenser name plate, receipts, or
shipping documentation and the scope of this manual applies only to the dispenser model
as specified therein.

WM048521 Rev 07 - PRELIMINARY 11/2014 3


1 Introduction

a STYLE e NO. GRADES OUT 1 - 8


C = C-style
If blender, count up +1 per each blending g NO. HOSES / NOZZLE POSITIONS PER SIDE
H = H-style 1 digit = Symmetric. Same number, solution, and
possibility between 2 grades
S = Small Style flows on both sides A & B.
2 digits = Asymmetric. Different number,
solutions, or flows on Sides A & B.
1st Digit = Side A
DESIGN 2nd Digit = Side B
b W = Wide
N = Narrow
H = High Hose
L = Low Hose
a b c de f g h NOTE: The last two positions shown here
X ( X /X ) X X - X X X can contain multiple digits

c ORIENTATION
ID = Island Dual Sided UI
IS = Island Single Sided UI
LM = Lane Mirrored
LU = Lane UnMirrored*

h BASIC TECHNICAL FEATURES


A = Additive
B = Biodiesel
NO. HYDRAULIC C = CNG (Compressed Natural Gas)
d NO. GRADES IN
f POSITIONS D = DEF (Diesel Exhaust Fluid)
1-5
0-5 E = Ethanol
F = Fleet
G = Enhanced Capacity
H = Super-High Capacity
J = Ultra-High Capacity
L = LPG (Liquified Petroleum Gas)
Example: M = Media
P = Payment
H(W/LU)23-21PR R = Remote
S = Suction
T = Terminal
U = 4 Users
*NOTE: The position prior to and
V = Vapor Recovery
following the slash '/' can contain two
W = Main (Back-to-Back)
(2) digits as shown in this example.
X = Back
The 'L' & 'U' specify 'Lane' &
Y = SAT Master (Satellite)
'UnMirrored'.
Z = SAT Slave (Satellite)

Figure 1.1: Helix Model Designation

4 WM048521 Rev 07 - PRELIMINARY 11/2014


1 Introduction

1.1.1 Wayne iGEM™ Computer Software


Helix model dispensers are delivered pre-installed with iGEM computer software, version 62
or later which can also be downloaded via laptop computer by a Wayne certified Service
Technician. ServTerm version 6.1.5 or later is required for servicing (loading the computer
software or dispenser configuration template), however, this is not required for installation
or startup of the dispenser.

1.1.2 Determining Dispenser Sides A & B


Locate the Wayne name plate on the outside of the dispenser. If, while facing the dispenser,
the name plate is on your right side, you are facing side A of the dispenser. If the name plate
is on the left side, you are facing side B of the dispenser.

WM048521 Rev 07 - PRELIMINARY 11/2014 5


1 Introduction

1.1.3 Parts of the Pump

electronic head

nozzle boot

nozzle

hose
hydraulic door lock

hydraulic module cabinet

base frame

Example shown is an Helix 6000 DEF fuel dispenser


Figure 1.2: Dispenser

6 WM048521 Rev 07 - PRELIMINARY 11/2014


1 Introduction

sales / volume / price display

VGA display

softkeys

printer door lock

keypad
card reader

Example shown is an Helix 6000 - DEF fuel dispenser


Figure 1.3: Dispenser Bezel

1.1.4 Product Liability


Wayne declines all responsibility for product liability if any modifications, additions, etc., have
been made to the equipment without the written consent of Wayne.

1.1.5 Intended Use


The pump is designed and approved for measuring and movement of a Diesel Exhaust Fluid
(DEF) in correct quantities, from tank to vehicle.

WM048521 Rev 07 - PRELIMINARY 11/2014 7


1 Introduction

1.1.6 What is DEF?


Diesel Exhaust Fluid (DEF), also referred to as AdBlue® in Europe, is a very aggressive
chemical fluid made of an aqueous urea solution of 32.5%, however, it is not flammable. It
is used for injection to the exhaust system of a vehicle to improve the catalytic process. Be-
cause of this, it is extremely sensitive to contamination from other fluids, metals, dust, dirt,
etc. The only approved testing liquid during production is distilled water that does not contam-
inate the urea product. There is always distilled water remaining in valves and other fragile
parts and as distilled water has a freezing point of around 0 degrees Celcius it means that
DEF equipment has to be kept above freezing point during all phases of transportation, de-
livery, installation, and operation.
AdBlue® is a registered trademark of Verband der Automobilindustrie e.V.

8 WM048521 Rev 07 - PRELIMINARY 11/2014


2 Important Safety Items

2 Important Safety Items

2.1 Safety Items You Should Know


• Know how to turn OFF power to the dispenser in an emergency.
• Know how to turn OFF power to submersible pumps in an emergency.
• Regularly inspect all external fuel carrying components such as hoses, nozzles, break-
aways, etc. for damage or leaks.
• Regularly inspect dispenser housing parts for damage or leaks.
• Have all leaks or defects repaired immediately.
• Test the Emergency (Shear) Valve by opening and closing several times at least once
per year.
• Use of automatic safety nozzles prevents overfilling fuel tanks and avoids spilling fuel.
• Avoid tipping the nozzle downward and spilling excess fuel.
• Sufficient lighting must be provided to allow safe use of the dispensers.
• A clearly visible and identifiable station Emergency Stop Switch must be provided at the
station to shut OFF power to all station dispensers and submersible pumps in case of an
emergency.
• Portable tanks (containers) of 12 gallons (45 liters) or less shall not be filled while they
are in or on a motor vehicle. See Warning information about this subject in the following
section.
• Hose retractor mechanisms are spring loaded and can pose a possible injury.
• Stow hoses to prevent tripping and falling.
• Care should be taken to prevent fuel spillage. If spillage occurs, clean up immediately.
• Know the Hazardous Zone area around the dispenser.

2.2 Classification Schemes


Zones Risk Types Protection Class Example

0 A risk area where explosive gas mix- Exia In a tank


ture exists all of the time or during a
long period.
1 A risk area where explosive gas mix- Exd, Exe, Exib, Within the meter
ture may occasionally exist during nor- Exp, Exia, Exs (within the hy-
mal operation. draulic areas and
column of the
pump)

WM048521 Rev 07 - PRELIMINARY 11/2014 9


2 Important Safety Items

Zones Risk Types Protection Class Example

2 A risk area where explosive gas mix- Exd, Exe, Exib,


ture is not expected to exist during Exp, Exia, Exs,
normal operation and, if it does exist Exo, Exq
anyway, it will be infrequent and for a
short period of time.

10 WM048521 Rev 07 - PRELIMINARY 11/2014


2 Important Safety Items

WM048521 Rev 07 - PRELIMINARY 11/2014 11


2 Important Safety Items

INSERT CLASSIFICATION SCHEME HERE

2.3 Portable Tanks and Containers


Portable containers of 12 gallons (45 liters) or less shall not be filled while they are in or on
a motor vehicle. Filling portable containers, especially when they are sitting on a non-conduc-
tive surface such as a floor mat or a plastic bedliner in the back of a pick-up truck, can present
a possible safety hazard and should be avoided as so stated in the following WARNING:

WARNING!
FIRE HAZARD!

The flow of gasoline through the dispenser nozzle


can produce static electricity which can cause a
fire if gasoline is pumped into an ungrounded
gasoline container. To avoid static buildup and the
possible resulting serious injury:
• Place approved container on the ground. Do
not fill the container in the vehicle or truck bed.
• Keep the nozzle in contact with the can or con-
tainer while filling. Do not use an automatic
pump handle (latch-open) device.

2.4 Health Note

WARNING!
Toxic Substances!

Be advised that contact with petroleum fuel and


inhalation of fuel vapors can cause serious damage
to your health.

2.5 Safety Precautions - Operation and Maintenance


• Only persons knowledgeable in performing the required maintenance shall perform the
work.
• All electrical power to the dispensing device and pump servicing the dispenser shall be
shut off at the main electrical disconnect panel.
• All vehicle traffic and unauthorized persons shall be prevented from coming within 20 feet
(6 meters) of the dispensing device.

2.6.1 Health and Safety Regulations


It is important that the following rules and regulations are followed when flammable liquids
are used:

12 WM048521 Rev 07 - PRELIMINARY 11/2014


2 Important Safety Items

• It is prohibited to smoke and light fire or bring open flame close to the pump.
• Stop the engine while refuelling.
• The distribution box must be easily accessible and access must not be blocked by goods
etc.
• Always ask a specialist to make electrical installations of any kind. Special regulations are
applicable!
• Please watch for any leakage from pumps. If there is a leakage, cut all power to the pump
and call Wayne After Sales Service.
• Always comply with the regulations regarding handling of petrol and oil, published by each
oil company.
• Always comply with public authority requirements related to the vapor recovery system.
• Make sure that a suitable fire extinguisher is in place and is easily accessible.
• To avoid malfunction or damage to the pump, make sure that there is enough fuel in each
tank.
• Adequate personal safety equipment should be used during maintenance of the equipment
(gloves, breathing mask, glasses etc.).

2.6.2 Health and Safety Regulations - DEF


It is important that the following rules and regulations are followed:
• The dispenser must be placed outside hazardous areas.
• The distribution box must be easily-accessible and may not be blocked by goods or other
items.
• Always let specialists make electrical installations of all kinds. Special regulations apply!
• Please pay attention to any leakage from the dispenser. If there is a leak, cut the power
to the pump and call Wayne After Sales Service at ( PHONE NUMBER HERE).
• Always follow all regulations regarding handling of Urea published by each distributor or
supplier.
• The customer must ensure that DEF does not come in contact with the skin or eyes while
re-filling. It is the responsiblity of the station owner to post applicable warning and caution
statements and/or stickers in a place on the dispenser that is visible to the customer.
• To avoid incorrect function or damage to the pump, ensure that there is enough Urea liquid
in the front.
• Adequate personal safety equipment should be used during maintenance of the equipment
(gloves, safety glasses, etc.)

Note!
To prevent damage in the hydraulic cabinet dispenser doors should be in place during rainy
and/or icy weather conditions. Also, check the nozzle boot flipper (if present) for freedom of
movement. If ice or snow has formed on the flipper, it should be cleared to prevent unecessary
damage.

WM048521 Rev 07 - PRELIMINARY 11/2014 13


2 Important Safety Items

2.7 Dispenser Safety Features


Helix dispensers come equipped with certain features that increase the safety of those persons
who come in contact with the dispenser, including customers, store employees and mainte-
nance technicians. Inclusion of these features depend upon the installation location and ap-
plicable laws and regulations.
• Emergency Shut-off (Shear) Valves - (optional)
An emergency valve is designed to close the product line in case of shock or fire. The
shear valve functions if the dispenser is knocked out of position.
• Hose Retractor
Helix dispensers are equipped with a hose retractor that will break away from the dispenser
in the event that a customer drives off while the hose is still attached to the vehicle.

Note!
On dispensers equipped with the Hose Retractor option, the hose clamp must be mounted
upstream of the breakaway device to avoid damage to the dispenser in the event of a
drive-off.

The combined hose, breakaway, and whip maximum lengths are listed in the table below.

Crossover Type Loopback Type Loopback Type


1 Hose per Side 1 Hose per Side 2 Hoses per Side

14' 0" (4.27m)


Non-Vapor 3/4” (19.050 10’ 0’’ (3.05 m) 10’ 0’’ (3.05 m)
mm)
Non-Vapor 5/8” (15.875 14’ 0’’ (4.27 m) 14’ 0’’ (4.27 m)
mm)

• Break-away Hose (optional)


Some Helix dispensers are equipped with a hose that will break away from the dispenser
in the event that a customer drives off while the hose is still attached to the vehicle. AL-
WAYS contact an authorized service provider after a breakaway accident. The following
parts must always be changed: Breakaway Valve (WM002174).

14 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

3 Operation

3.1 Introduction
You will need to access the maintenance mode in order to program functions and/or view
statistics. The function and statistics data appear in the money, volume, and unit price display
windows. The infrared interface is similar to a television remote control. It has 16 buttons and
is used to access dispenser functions. This interface uses only the pump display for user
feedback. There is no additional display. Refer to Section 3.3 Infrared Remote Control, on
page 15.

3.2 How to Get Service On Your Dispenser


Trouble with the operation of the dispenser should be referred to your local Wayne authorized
service personnel or call the your local service provider.

Note!
Any modification, repair, or service to the dispenser not in accordance with the original design
may invalidate compliance with the equipment certifications such as CE Marking, UL-listing,
etc. Consult manufacturer as necessary.

3.3 Infrared Remote Control


The Infrared Remote Control (IRC or IR remote) is used to access dispenser functions and
sub-functions, and diagnostics (statistics). When held close to the infrared eye on the display
board, the remote can be used to set unit prices, fueling point IDs, and read electronic total-
izers.

Figure 3.1: Infrared Remote Control (IRC or IR Remote)


A description of each key on the IR remote is given in the following table.

IRC When F - - When F 'xx' When xx.xx sub-


keys is shown on the is shown on the function
unit price display unit price display is shown on the
unit price display

NEXT F00 Next higher func- Next higher sub-


tion # function level

WM048521 Rev 07 - PRELIMINARY 11/2014 15


3 Operation

IRC When F - - When F 'xx' When xx.xx sub-


keys is shown on the is shown on the function
unit price display unit price display is shown on the
unit price display

UP S - - (statistics Next higher func- Next higher sub-


mode) tion # function level
DOWN S - - (statistics Next higher func- Next higher sub-
mode) tion # function level
ENTER Pressing 3 times sub-function level Back to function
will exit configura- (xx.xx) level (except while
tion mode without entering new val-
saving ue, it displays the
change)
CLEAR n/a F-- Back to function
level (except while
entering new val-
ue; can be used to
erase last digit
typed)
# n/a n/a Must use this key
to enter new data
DIGITS After pressing EN- After pressing EN- If you clear the
TER, will take you TER, will take you display with the
to the Function to the Function "#" key first, it will
level of the digits level of the digits change the value
entered entered of the sub-function
to the digits en-
tered after press-
ing ENTER

Note!
When in Statistics mode (S - - ) or (S "xx") are shown on the Unit Price Display, the above
commands work the same way.

3.4 Basic Dispenser Requirements


Unit prices must be set and the dispenser must be authorized for the dispenser to operate.
If the dispenser is connected to a POS control system and you want to operate the dispenser
in the stand-alone mode independently from the control system, perform the following steps:
• Use IR remote control and set the Filling Mode to Stand-alone.

3.5 Programming Functions


• Change Unit Price (F03)

16 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

• Exit Function (F00)


• Filling Modes (F01)
• Password Change (F33)
• Access to Functions

3.6 Access to Functions


Press the CRC button on the iGEM board.
Access the programming mode by pressing one of the following keys on the remote control:

"1" Station manager entry using the station manager password


"2" Operator entry using the operator password

The programming mode asks you for a password twice before allowing access to the functions.
A 10-second time-out is built into the password entry code.
After 3 seconds the display shows:

When the word PASS 1 appears on the sales display, you have 20 seconds to start entering
the password entry code. The timer restarts after you press a key. When you finish entering
the password, press <ENTER> (=E).
PASS 2 appears in the sales display window, prompting you to enter the password again.
The display shows:

Note!
If you press nothing more, press <ENTER> (=E) or press the wrong password, or there is
no confirmation after pressing the password and the <ENTER> key, the computer will leave
this function automatically after 10 seconds.

Note!
If you press the wrong keys, press <CLEAR> (=C) key to erase the last digit you typed.

Press again the pasword to confurm and press <ENTER>.


Press <ENTER>.
The display shows the Function screen:

WM048521 Rev 07 - PRELIMINARY 11/2014 17


3 Operation

When you enter the programming mode, the unit price display windows show "F - -", the
money display window shows the software version number, and the volume display window
shows the software version number, and the volume display window shows the date of the
software version. To edit or view specific functions, enter any function number using the
number keys and press <ENTER>. The corresponding number appears in the money display
window.

3.7 Annunciator Operation Check


Check that the annunciator (beeper or buzzer) is operating properly on each side of the dis-
penser. When pressing the keys on the CAT keypad or the Push-to-Start / Grade Select
buttons on the bezel, you should hear the annunciator beep.

3.8 Set Clock Function (F 02)


Function F02.00 displays the time (HH.MM), F02.01 is the date (MM.DD) and F02.02 is the
year (YY.YY)

IRC Command Volume Display Status Display Unit Price Dis-


play

Press either EN- PASS 1


TER, 1, or 2, de-
pending on access
level
Type the corre- PASS 2
sponding pass-
word
Press ENTER
Type the pass- iGEM software Date F--
word again setting
Press ENTER
Type 2 ------ F 02
Press ENTER
Press ENTER ------ Time in HH.MM 2.00
format
Press # Time in HH.MM 2.00
format

18 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

IRC Command Volume Display Status Display Unit Price Dis-


play

Type the current ------ Entered time in 2.00


time in 24-hour HH.MM format
format of HH.MM
- Press ENTER
Press NEXT ------ Date in MM.DD 2.01
format
Press # date in MM.DD 2.01
format
Type the current ------ entered date in 2.01
date in the format MMDD format
of MMDD
- Press ENTER
Press NEXT ------ year in YYYY for- F 02
mat
Press # year in YYYY for- F 02
mat
Type the current ------ current year in F 02
year in the format YYYY format
of YYYY
- Press ENTER
Press ENTER ------ F 02

3.9 Exit Function (F00)


Use this function to select one of three maintenance mode exits.

Press 00
Press <ENTER> the display shows:

Press <ENTER> the display shows:

WM048521 Rev 07 - PRELIMINARY 11/2014 19


3 Operation

Press <#> the display shows:

Select one of three mainte-


nance mode exits:
01 = Do not exit and do not save changes
02 = Exit, but do not save changes
03 = Exit and save changes
Press <ENTER> If you have entered 03, the display
shows:

Press <ENTER> the display shows:

3.10 Password Change (F33)


For access to functions, see Section 3.6 Access to Functions, on page 17
Select this function to change the password.

Press 33
Press <ENTER> the display shows:

Press <ENTER> the display shows:

Select the sub-function with


<NEXT>:
33.01 Station Manager Password
(max. 6 characters)
33.02 Station Operator Password
(max. 6 characters)

20 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

Press <#>, the money display Dashes appear instead of regular en-
goes blank. tries, as shown:
Enter the new password.

Press <ENTER> the display shows:

Enter the new password twice Dashes appear instead of the regular
(2 times) entries:

Press <ENTER> If the password is correct, the dashes


and PASS flashes

Press <ENTER> If the password was changed, the


dashes flash

Note!
Use F00 Exit Function - Option 3 to exit and save changes.

3.11 Filling Modes (F01)


For access to functions see Section 3.6 Access to Functions, on page 17
Select this function to change the Filling Mode.

Press 01
Press <ENTER> the display shows:

Press <ENTER> the display shows:


(the actual status is shown on volume display)

Press <#> the amount shows blanks:

WM048521 Rev 07 - PRELIMINARY 11/2014 21


3 Operation

Enter the new Fill- (the new Operating mode is shown on amount
ing Mode display)

1 = Serial Mode - dispenser controlled by site con-


troller via serial link.
2 = Stand Alone Mode - dispenser not supervised
by a site controller
3 = Serial W&M mode - same as #1 but 3 volume
decimals
4 = Stand Alone W&M - same as #2 but 3 volume
decimals
5 = Serial W&M Mode - ATC, inspection of tempera-
ture compensation
6 = Stand Alone W&M Mode - ATC, inspection of
temperature compensation
Press <ENTER> the display shows:
the new Operating mode is shown on volume dis-
play

Press <ENTER> If the Filling Mode was changed, the dashes flash

Note!
To exit and save changes uses F00 Exit Function, option 3.

3.12 Setting Unit Prices

3.12.1 F03 - Set Side A Unit Prices


Sub-function numbers are in the format below.
.0N Set prices
.1N Not used (Set cash prices)
N Logical nozzle number 1-4 (5-8 (optional)

Note!
The Unit Prices are initialised after Coldstart to 99.01, 99.02, 99.03, 99.04 and so on.

22 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

3.12.2 F04 - Set Side B Unit Prices

Note!
The Unit Prices are initialised after Coldstart to 9911, 9912, 9913, 9914.

3.12.3 Changing the Unit Price (F03)


If a control system is connected, its prices override the prices in the pump and the prices
programmed in this sub-function are not used.

3.12.3.1 Changing Prices on Side A


For access to functions go to Section 3.6 Access to Functions, on page 17.
The display shows the function screen.

Press 03 The display shows:


Press <ENTER>

Press <ENTER> The display shows:

Note!
To access the other unit price, press <NEXT>

Sub-function 3.01 is responsible for changing unit price of fuel at nozzle 1 on side A and so
on, according to the table below.

Sub-Function Nozzle Side


Credit Prices (Position)

3.01 1 A
3.02 2 A

Sub-Function Nozzle Side


Cash Prices (Position)

3.11 1 A
3.12 2 A

Example: I have two pumps programmed to a unit


price of €1.300 and want to change to €1.420.
Perform the following steps:

WM048521 Rev 07 - PRELIMINARY 11/2014 23


3 Operation

Press the <#> key. The dotted part on


paying total of dis-
play will be erased.

Enter the desired value


Example: 1420

Press <ENTER> The display shows:

To change from one sub-functon to another use


the <NEXT> key.
(Example: from 3.01 to 3.02)
The same procedure applies to change the cash
proces
(Sub-functions 3.11 to 3.12)
To SAVE all changes, follow EXIT procedure of
"F00" exiting, value 3. (Refer to table)

3.12.3.2 Changing Prices on Side B


Sub-function 4.01 is responsible for changing unit price of fuel at nozzle 1 on side A and so
on, according to the table below.

Sub-Function Nozzle Side


Credit Prices (Position)

4.01 1 B
4.02 2 B

Sub-Function Nozzle Side


Cash Prices (Position)

4.11 1 B
4.12 2 B

Example: I have two pumps programmed to a unit


price of €1.300 and want to change to €1.420.
Perform the following steps:

24 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

Press the <#> key. The dotted part on


paying total of dis-
play will be erased.

Enter the desired value


Example: 1420
Press <ENTER> The display shows:

To change from one sub-functon to another use


the <NEXT> key.
(Example: from 4.01 to 4.02)
The same procedure applies to change the cash
prices.
(Sub-functions 4.11 to 4.12)
To save all changes, follow exit procedure of "F00"
exiting, value 3.

3.13 Authorizing the Dispenser


The dispenser must be authorized before it will dispense product.
The dispenser filling mode is set in programming function F01. In stand-alone mode (not
connected to a control system), the dispenser is always authorized.
When connected to a control system, the system programming determines authorization.

3.14 Disable Stand-alone Operation


Once the dispenser is switched over to the POS control system, standalone operation may
not be required. As an extra security measure, the jumper that enables stand-alone operation
may be removed. The jumper (J6) is located on the unit price display board as shown in
Figure 3.2.
1 Access dispenser Filling Mode function F 01 and set sub-function to 1.01 for serial mode.
2 Open the service door.
3 Remove the J6 jumper from the Unit Price Display board (Figure Figure 3.2).
4 Close and lock the service door.

WM048521 Rev 07 - PRELIMINARY 11/2014 25


3 Operation

J6 jumper

Figure 3.2: Sales Display with J6 Jumper

3.15 Operating the Dispenser


1 Remove the nozzle from the nozzle boot for either the blended hose or the single product
hose. The nozzle boot switch will turn on. The unit price displays of the product(s) not
selected will show dashes.
2 Push a grade selection button for the desired product to select one of the products from
the blending hose, or the one product from the single product hose. The dispenser will
reset and prepare for delivery. The sale display will show all eights, then blanks, then the
money and volume portion of the display will reset to zero. The unit prices not selected
will be blank or show dashes. The grade selection button that was pressed will be contin-
uously lit; the others will be dark. The correct pump(s) will start at the beginning of the
reset cycle and the solenoid valve(s) will open approximately three seconds later. Product
selection can be changed any time before product flow is sensed by the computer.
3 Dispense product. (Pressing the optional Stop button will stop product flow only. The
nozzle boot switch must be cycled and the dispenser must then be reset before that side
of the dispenser can continue operation.)
4 Return the nozzle to the nozzle boot. The nozzle boot switch will turn off; the sale will be
complete and ready to pay.

3.16 Initial Delivery


To dispense product from a newly-installed dispenser, make sure unit prices are set (as
previously described) and proceed as follows:
1 Authorize the dispenser.
2 Remove the nozzle, start the reset sequence and observe the reset cycle; make sure all
sales display and unit price display elements operate.
3 Check that when reset is started, the correct submersible pump motor is activated, and
at the end of the display reset (approximately three seconds) the solenoid valve(s) opens
(listen for the audible click of the valve(s).

26 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

4 After verifying air is bled properly from each trunk line, slowly dispense product through
each dispenser until free of air. Dispense enough product through each hose of each
dispenser to ensure the dispenser and the lines are free of air, before checking the meters.

Note!
Make sure the product lines are properly bled before dispensing any product through a
remote dispenser.

3.17 Restarting After Power Failure or Shutdown


After loss of power, the display accurately displays the amount of the sale, in money and
volume, for approximately 15 minutes. When power is restored, all sales information returns
to the displays. Any sales in progress will be ended; old sales should be paid and the dispenser
reauthorized if more product is to be dispensed.
If the dispenser does not operate properly when power is restored (does not deliver product,
or does not reset), record both the money and volume shown on the display (so sales can
be paid for) and perform the following:
1 Ensure all nozzles on the side are in their nozzle boots.
2 Authorize the dispenser.
3 Remove the nozzle from the nozzle boot. The dispenser should operate normally. If the
dispenser does not resume normal operation, try cycling power as described in the next
section.

3.18 Cycling Power to Clear Faults


If a fault in the dispenser is detected by the computer, an error message will be displayed in
the sale display as described in Section 3.19 Error Codes, on page 27. Record the displayed
error message. It may be possible to restart the dispenser by following the sequence below:
1 Ensure all nozzles are properly seated in the nozzle boot.
2 Turn the control power circuit breaker OFF for approximately five seconds. The dispenser
annunciator will sound. Turn the control power circuit breaker ON; the dispenser annunci-
ator will again sound.
3 Authorize the dispenser.
4 Remove the nozzle from the nozzle boot. The dispenser should operate normally.
If it is not possible to restart the dispenser using this procedure, or if an error message con-
tinues to be displayed, consult appropriate service personnel. Be certain to give the service
personnel the amount at which the dispenser stopped and the exact error message.

3.19 Error Codes


Computer error codes can be displayed on the side of the dispenser where the error occurred
by accessing the sub-functions S21.XX for Side 1 and S22.XX for Side 2, where XX is between
01 and 50 and represents the error/events records maintained by the computer program -
with 01 being the most recent. The computer can store up to 50 errors per side, continuing
to store errors beyond the 50th by cycling the error buffer with new errors inserted at the top
of the buffer. When this happens, an error is deleted at the bottom of the buffer for every new
error that is inserted in the top of the buffer.

WM048521 Rev 07 - PRELIMINARY 11/2014 27


3 Operation

Errors are displayed in an alternating 2-page format. Information in the error pages is given
below.

Page 1 error information Page 2 error information

HH.MM MM.DD.YY
CC.DD.NN C

Where: Where:
HH = hour MM = month
MM = minute DD = day
CC = error code YY = year
DD = device number C = filing count
NN = logical nozzle number

The complete description of the error codes is given in the Helix Programming Manual (p/n
WM048525).
Computer errors are read by entering the Maintenance Mode and accessing the correct
statistical function and its sub-functions. Perform the following steps using the remote control.
Bold type denote remote control function; italicized type represents dispenser response.
Accessing the error code Sub-function.
1 Press ENTER. PASS 1 (enter password).
2 Press ENTER. PASS 2 (enter password).
3 Press ENTER. The unit price display will show F.
4 Press either UP or DOWN to enter the statistics viewing mode. The unit price display will
show S— indicating that a number needs to be selected.
5 Press 21 to access S21 (error data for Side 1 or A which is the junction box side).
6 Press ENTER. The unit price display will show 21.01, the first and most recent error data
for Side 1. The data will be displayed in the 2-page format described earlier, in an alternat-
ing sequence, at a 1 second per page rate.
7 Pressing NEXT accesses 21.02 and the display shows information for the second error
logged. By pressing NEXT, the error buffer can be viewed completely.
8 To exit, press CLEAR, then UP or DOWN. The unit price display will show S—.
9 Press ENTER three (3) times to exit to the normal display.

3.20 Resetting After All Stop


This section applies to Helix dispenser models connected to a Point of Sale (POS) system.
Pressing the All Stop key on the POS system sends a signal to the dispenser computer to
interrupt product flow.
To resume product flow, refer to the applicable manual for the Point of Sale system used at
your location.

28 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

3.21 Electronic Totalizer Readings

3.21.1 Totalizer Volume Readings by Meter Position


Meter volume totals are stored in statistical functions that are accessed using the remote
control. The totals for Side 1 are stored in function S05 and those for Side 2 are stored in
function S06. The value of the meter totals are stored in the sub-functions that take the format
.M0, where M is the meter number. For example, M=5 for the high feedstock iMeter located
on Side 1 of a remote series blender. For Side 2 of the same meter, M=1.
Meter electronic totalizers are read by entering the Maintenance Mode and accessing the
correct function and associated sub-functions. Perform the following steps using the remote
control. Bold type denote remote control function; italicized type represents dispenser re-
sponse.
Accessing the Meter Volume Totalizer Sub-function for Side 1:
• Press ENTER
PASS 1 (enter password).
• Press ENTER
PASS 2 (enter password).
• Press ENTER. The unit price display will show F.
• Press either UP or DOWN arrow to enter the statistics viewing mode. The unit price display
will show S— (indicating that a number needs to be selected).
• Press 05 to access S05.
• Press ENTER. The unit price display will show S05 (indicating that the statistical function
has been accessed).
• Press ENTER to access the sub-functions of S05. The unit price display will show 5.10
(note here that M=1).
Consecutive pressing of NEXT will allow access to the next sub-function, incrementing the
value of M by (.1). For example, to access S05.20, press NEXT. The unit price display will
show 5.20. The value of the meter volume totals is shown in a format such that the least
significant six (6) digits of the data value appear on the volume display, while higher order
non-zero digits of the data value, if present, appear on the money display. Leading zeros
appear as blanks.
Quick Exit
1 Press the CLEAR key until the unit price display window shows S - - .
2 Press ENTER three times. This causes the maintenance mode task to immediately termi-
nate.

3.21.2 Electro-Mechanical Totalizer Operation


Totalizers are optional on Helix dispensers. Electro-Mechanical totalizers are located on the
junction box side of the dispenser. There is one totalizer for each meter. The totalizer positions
on the bezel relate to the meter position numbers. The physical position of the totalizers, left
to right, on the bezel represent meter positions.

WM048521 Rev 07 - PRELIMINARY 11/2014 29


3 Operation

The totalizer shows seven digits and reads in whole units (gallons or liters). Fractional amounts
that are left over from a previous sale are stored in the dispenser computer. When the next
sale of the same product ends, if the fractional amounts from the new sale and previous
sale(s) combined are one (1) whole unit or greater, the Electro-Mechanical totalizer is adjusted
one whole increment; i.e., if five consecutive sales end with a fractional amount of .2, the
Electro-Mechanical totalizer will not account for the fractions until after the fifth sale.

30 WM048521 Rev 07 - PRELIMINARY 11/2014


4 Operator Maintenance

4 Operator Maintenance

CAUTION!
Fire Hazard!

Do not re-install a broken break-away valve. In-


stalling a damaged valve may result in a hazardous
condition that could result in serious injury by fire
or explosion.

Note!
To prevent damage to components located in the hydraulic cabinet, dispenser doors should
be in place during rainy and/or icy weather conditions.

4.1 Hose and Hose Retractor

Note!
On dispensers equipped with the Hose Retractor option, the hose clamp must be mounted
upstream of the breakaway device to avoid damage to the dispenser in the event of a drive-
off.

The combined hose, breakaway, and whip maximum lengths are listed below.

Crossover type Loopback type Loopback type


1 hose per side 1 hose per side 2 hoses per side

14 ft
(4.27 m)
Non-vapor 3/4 in. 10 ft 10 ft
(.019 m) (3.05 m) (3.05 m)
Non-vapor 5/8 in. 14' 0" 14' 0"
(.016 m) (4.27 m) (4.27 m)

4.2 Filter / Strainer - Remote


The filter should be changed and the strainer cleaned on a regular basis. A dirty filter and
strainer may cause the dispenser to deliver fuel slowly. In some cases, this may appear to
be a more serious service related problem, when simply changing the filter and cleaning the
strainer is all that is required.
Before removing the filter, trip the impact valve and turn OFF the circuit breaker for the asso-
ciated submersible pump.

WM048521 Rev 07 - PRELIMINARY 11/2014 31


4 Operator Maintenance

The fuel filter is removed the same way an oil filter is removed from a car engine. As shown
below, the new fuel funnel catches any fuel that is spilled and will properly drain it into a
container. Place a container under the funnel spout when changing the filter.
To install the new filter, first apply a film of oil to the gasket and hand turn until the gasket
contacts the base. Then tighten one half turn. Open the emergency shear valve, turn the
submersible circuit breaker ON and check for leaks.
In new installations it may be necessary to change the filter frequently in the first few days
of operation in order to ensure proper operation.
The strainer is located inside the casting and held in place by the filter. Place a suitable
container below filter/strainer casting to catch product and sediment. Remove the filter and
gently pull the strainer out of the filter/strainer casting. Clean strainer screen of any debris.
Reinstall strainer and a new filter.
If the underground installation is new, it may be necessary to clean the strainer screen two
or three times the first few days of operation to remove debris and pipe dope. After this, oc-
casional cleaning of the strainer is all that should be required. The fuel filter should be changed
whenever the strainer is cleaned.

WARNING!
Electric Shock Hazard!

Before removing the filter and strainer turn the


power to the dispenser and submersible pump(s)
off and close the emergency shut-off valves on the
dispenser being serviced. Failure to do so may
result in a hazardous condition that can result in
serious injury due to electric shock.

Figure 4.1: Remote filter

32 WM048521 Rev 07 - PRELIMINARY 11/2014


4 Operator Maintenance

4.3 Dispenser cleaning


Dispenser cleaning should be done frequently and in the manner outlined below. We can not
stress enough that regular care of the dispenser is the most important element of the cleaning
procedure. It prevents dirt and liquids from permeating the surface materials and forming
stains that can only be removed with more abrasive and aggressive cleaning methods.

Note!
Do not use pressurized water (even from a garden hose) to wash or rinse off a dispenser.
Under no circumstance should power washers be used to clean a dispenser. This can force
water into the electronic head and cause damage to the electronic components in the dis-
penser rendering it inoperative.
Do not use all-purpose cleaners.
Do not use gasoline or other petroleum-based products to clean the dispenser.
Use only mild cleaners such as regular manual dish washing detergents or soap! Wayne
takes no responsibility for damage on the product caused by aggressive cleaning detergents
not approved for cleaning use by Wayne.

Note!
It is important to wipe down the dispenser with a clean cloth and clear water after every
cleaning.

Note!
Periodic waxing of the dispenser surfaces is essential to maintain the original finish and in-
hibit corrosion. Stainless steel surfaces should be polished with a non-abrasive silicone wax.

Note!
No chlorine based cleaners can be used on the stainless steel.

4.4 Meter Maintenance


All dispenser meters are calibrated and sealed at the factory prior to shipment and delivery.

WM048521 Rev 07 - PRELIMINARY 11/2014 33


A Dissasembly - Recycling

Appendix A Dissasembly - Recycling

WARNING!

Disconnect mains power prior to any work, to pre-


vent damage which may result in electric shock or
fire.

WARNING!
Danger of tipping!

Please note that the centre of gravity is not in the


centre, and varies from one pump model to anoth-
er.

A.1 Empty the fuel out of the pump


It is important that there is no fuel in the pump before disassembly.
Blank the inlet pipes with a flange and gasket.
Between one and four pump units must be emptied and blanked, depending on the pump
model.
If necessary, ask a transport company for special regulations.

Part no. Name

Flange for blinding of the inlet pipe


WB000232-0004 Washer, BRB 8, 4X16 FZ (3p)
WB000228-0004 Nut, M6M M8 FZB (3p)
WM004482 Transport gasket for new inlet
WM004481 Flange blind for new inlet

A.2 Dispenser recycling


The dispenser must be recycled according to the applicable regulations in the country where
it is installed.

WM048521 Rev 07 - PRELIMINARY 11/2014 35


B Declaration of Conformance

Appendix B Declaration of Conformance

The 'X' suffix after the certificate number relates to the following special condition for safe
use:
1 When intended for use with ethanol blended fuels the user shall:
• ensure that the fuel shall not excess 90% ethanol with minimum water content;
• access the suitability of parts used in the construction of the fuel system for long term
suitability with such fuels with due regard to the use corrosion inhibitors;
• give due consideration to the correct selection of supplementary fittings (safe breaks,
etc.).
2 Where petrol fuel dispensers are shipped without nozzles, the equipment shall be fitted
with nozzles complying with EN13012 prior to being put into use.
3 Where petrol fuel dispensers are shipped without hoses, the equipment shall be fitted with
hoses complying with EN1360 or EN13483 prior to being put into use.

36 WM048521 Rev 07 - PRELIMINARY 11/2014


C Glossary of Terms and Acronyms

Appendix C Glossary of Terms and Acronyms

Table C.1:

TERM DEFINITION

additive a product added to the gasoline to enhance perfor-


mance
ALU aluminum
ambient the surrounding area or environment (as in ambi-
ent temperature)
Annunciator beeper, buzzer
ATC automatic temperature compensation
bezel the outer rim at the upper part of the dispenser
bleeding clearing the fuel lines of air (also, purging)
blender mixes two fuels together to obtain a third; a
blending dispenser
blend ratios the amount or quantity of each of the two fuels
added together to obtain the third fuel
board a printed circuit board; one of the electronic boards
in the dispenser
bootstrap (as in computers, loading software)
breakaway device between the hose and dispenser that
breaks if the hose is accidentally pulled by the car
breakaway valve see emergency valve
C&PR valve Check and Pressure Relief Valve
CAT customer-activated terminal
circuit breaker a type electrical device
conduit enclosure used for routing electrical wires
coupling small section of pipe used to connect two pipes
together
C-syle the frame of a dispenser in the shape of the En-
glish letter C
current loop a communication circuit used by the dispenser
and POS system
double bump tube a tube having two raised areas on the ends

WM048521 Rev 07 - PRELIMINARY 11/2014 37


C Glossary of Terms and Acronyms

TERM DEFINITION

drip pan a catchement container (to catch liquids)


drip pan a pan used to drain or catch the fuel to keep it from
spilling onto the ground
EH electronic head
EHPM electronic head and payment terminal
electro-mechanical mechanical device controlled by electricity (as in
electro-mechanical totalizer)
emergency valve this valve is designed to close the fuel suupply line
if a vehicle crashes into the dispenser or if there
is fire in the dispenser; also known as shear valve,
crash valve and breakaway valve
EMT electro-mechanical totalizers
ESD electro-static discharge
filter device that captures small unwanted particles in
the gasoline or diesel fuel
fuel funnel used to drain fuel into a pan or container in order
to prevent spilling
fueling point identification a number assigned to a dispenser so that it can
address (FPID) be identified on a communications network
gross volume the amount or volume of fuel before temperature
compensation
Healy name of a vapor recovery system
high capacity dispenser is designed for a higher fuel flow rate
and therefore delivers a higher volume of fuel as
compared to a standard capacity dispenser
hose flexible tubing that connects the nozzle to the dis-
penser and where gasoline, petrol, or other product
flows through
H-style the frame of a dispenser in the shape of the En-
glish letter H
hybrid more than one source: (Wayne - Hybrid card
reader that reads both magnetic strip cards and
cards that contain a micro-chip that has the card
number
inlet location at a meter, valve, or casting where the
fuel enters

38 WM048521 Rev 07 - PRELIMINARY 11/2014


C Glossary of Terms and Acronyms

TERM DEFINITION

Intrinsic Safe Barrier (ISB) barrier inside the dispenser - the area below the
barrier is free from hazardous electrical sparks
island-oriented when the nozzle is located on the left or right sides
of the dispenser, as opposed to front or back sides
jitter unwanted electrical pulses or interference (as in
jitter pulses)
jumper small wire or connector used to join together to
pins in a connector or on a circuit board
junction box a metal box located near the bottom of the dis-
penser
lane oriented when the nozzle is located on the front or back
sides of the dispenser as opposed to th left or right
sides
LEE lower electronic enclosure
low hose the fuel hose is connected near the middle of the
dispenesr, as opposed to high at the top
LT low temperature
LTS lift-to-start (to activate dispenser)
meter dispenser component that measures the amount
of fuel dispensed.
net volume the amount or volume of fuel after temperature
compensation
nozzle device at the end of the hose that is inserted into
the vehicle (or container) when dispenseing prod-
uct
nozzle boot the holder (on the dispenser) of the nozzle when
it is not in use
outlet location at a meter, valve, or casting where the
fuel exits
outlet casting a metal or aluminum type mold where the hose is
connected to the dispenser
P/N part number
payment terminal (PT) as in payment terminal on the dispenser where a
payment is made by credit card
pedestal platform or base that the dispenser sits on (also
referred to as 'island' in some areas)

WM048521 Rev 07 - PRELIMINARY 11/2014 39


C Glossary of Terms and Acronyms

TERM DEFINITION

pipe dope sealant used on the threads of a pipe; pipe sealant


POS Point of Sale
prime to pour fuel into the pump to clear out the air in
order to start the pump properly
product tube fuel tube; the tube that contains the fuel or that
fuel moves through
PTS push-to-start (to activate dispenser)
pulser device that generates signals
purge clearing the fuel lines of air
relay an electrical component used in the dispenser
remote (pump) the pump for the dispenser is located in the under-
ground tank; not inside the dispenser
residual something left over or remaining (as in residue)
retainer clip (pin) used to secure or hold a tube in place
retractor pulls hose back into place after use
sales/volume display shows the total sale amount and the volume dis-
pensed
satellite (dispenser) a small dispenser connected to and controlled by
another dispenser that is referred to the master
servTerm a software application also known as the Service
Terminal program
shear valve see emergency valve
sight glass a glass cylinder used for visually measuring vol-
ume of fuel
Small-style a short (small) type of dispenser
softkey as in buttons or keys on a keypad
solenoid valve electro-mechanically operated valve
SPM secure payment module
stand-alone mode dispenser is not connected to or communicating
with the POS
Std standard
strainer device that captures small unwanted particles in
the gasoline or diesel fuel

40 WM048521 Rev 07 - PRELIMINARY 11/2014


C Glossary of Terms and Acronyms

TERM DEFINITION

submersible pump that is located in the underground tank


suction (pump) the pump for the dispenser is located inside the
dispenser
torque rotating force applied to tighten; amount of force
used to tighten a screw or pipe
Torx™ a brand name of a type of screw
TOT totalizer -
totalizer (TOT) device on the dispenser that counts and displays
the total volume units
TRAC Transponder-activated CAT
triple bump tube a tube having three raised areas on the end
unit price display (UPD) shows the fuel price per gallon or per litre
universal joint a type of coupling
UPD Unit Price Display
UPS Un-interruptible Power Supply
vacuum air has been removed (as in a vacuum line)
valance cosmetic panels around the top of the dispenser
vapor recovery system that claims fuel vapors, minimizing expo-
sure to the customer and environment
WIP Wayne Intelligent Pulser; a type of meter manufac-
tured by Wayne
Xflo a type of meter manufactured by Wayne

WM048521 Rev 07 - PRELIMINARY 11/2014 41


Warranty
Any alternations or, additions to, or unauthorized work performed on the equipment without
manufacturer’s express written consent shall void any existing product warranty. Please see
product warranty information for additional details.
Use only genuine parts.

Copyright notice
© 2014 Wayne Fueling Systems
The contents of this manual may not be copied in whole or in part without the express written
consent of Wayne Fueling Systems.
Wayne Fueling Systems reserves the right to make revisions to this manual without prior
notice.

WM048521 Rev 07 - PRELIMINARY 11/2014


Headquarters Wayne Sweden Wayne China Wayne Brazil
Wayne Wayne Dresser Wayne Fuel Dresser Industria e
Dresser, Inc. Hanögatan 10 Equipment Comercio Ltda.
3814 Jarrett Way Box 50559 (Shanghai) Co., Ltd. Estrada do Timbo
Austin, TX 78728 SE-202 15 Malmö 1221 Dong Lu Road 126-Bonsucesso
USA Sweden Pudong, Shanghai Rio de Janeiro, Brasil
China

© 2014 Wayne Fueling Systems WM048521 Rev 07 - PRELIMINARY 11/2014

Источник: https://www.scribd.com/document/540958110/Wm048521-Helix-6000-Iec-Def

DiRT 3 (Colin McRae) - Activation Key (GFWL CD-KEY)

>>>>> KEY IS NOT INTENDED to activate the system STEAM! <<<<<

What you buy:

You will instantly receive a license activation key (serial number, CD-KEY) system Games for Windows LIVE game DiRT 3 (or DiRT 3 Complete Edition).
_________________________

The activation key in the format XXXXX-XXXXX-XXXXX-XXXXX-XXXXX is displayed in the browser window immediately after the payment.

Activated game gives you full access to all the network functions of the game, including a multiplayer mode (Multiplayer).
Buy activation key and play with real players in one of the best racing simulators, received high ratings game media!

_________________________

REQUIREMENTS FOR ACTIVATION

Note: This switch is not suitable for game activation system Steam. It is designed to activate the service in the Games for Windows LIVE.
To activate the key must have installed the game DiRT 3 or DiRT 3 Complete Edition. The distribution of the game can be downloaded from the Internet (eg, torrent trackers) or set with the original game disc.
For full access to all the DLC in DiRT 3 Complete Edition, you must install the appropriate version of the game. Prepaid code that gives access to all the DLC DiRT 3 Complete Edition in this product is not included.
_________________________

Game Description

Continuation of the well-known racing series Colin McRae, has gained popularity thanks to simple but exciting gameplay.
In DiRT 3 (Colin McRae: DiRT 3) represented more machines areas, trails and events than in previous games. More than five dozen of the best rally cars, racing over the past fifty years; twice as many tracks as the project in 2009; ratings, awards and achievements - in DiRT 3 each can become a true professional virtual rally and make a brilliant career racer.
Conquer the toughest tracks in Finland, Monaco, Tokyo. Snow, rain, mud - be prepared for any surprises the weather, day and night!

Features DiRT 3:
• The grand fleet. The game features the famous rally cars the last few decades of the twentieth century, which will impress any fan of racing.
• Virtuosi steering. The new regime "Gymkhana" allow everyone to show their skills in specially equipped areas, performing all sorts of dizzying avtotryuki - Drift, ski jumping, "police reversals."
• And in the rain and snow. Racers can test themselves by taking part in competitions under difficult weather conditions and at night.
• Split Screen. In the first in the history of the series, players can compete in split screen mode.
• challenging tracks rally championships in Europe, Africa, the United States of America.
• Bundle YouTube account for the immediate publication of spectacular moments of the game.

\u003cdelivery\u003e The original copy of the key, the license agreement and all copies of the software in its original packaging, you can get a convenient way for you. To do this, after payment and receiving a digital copy of the key, please contact me via Skype or web messenger (button "Ask a question ..."). For residents of Moscow and the delivery can be carried out by courier. Postage and packing, as well as courier services are paid separately by you. \u003c/delivery\u003e

Источник: https://plati.ru/itm/DiRT+3+(Colin+McRae)+-+Activation+Key+(GFWL+CD-KEY)/1459315?lang=en-US

Many old PC games seem to work fine on Windows 10, but games using Microsoft’s failed Games for Windows LIVE (GFWL) platform are an exception. They’ll give you an error on Windows 10. You can remove GFWL from many games entirely, though, or just troubleshoot it and make it work properly.

Many games have abandoned GFWL, allowing you to redeem a non-GFWL copy or install a patch that removes GFWL. But not all of them have. For example, Rockstar’s Grand Theft Auto IV and Grand Theft Auto: Episodes from Liberty City still use GFWL, as does Bethesda’s Fallout 3. These games are regularly promoted on Steam sales, so gamers will be stumbling onto GFWL for years to come.

Get a Non-GFWL Copy of the Game

RELATED:Why PC Gamers Hated Microsoft's "Games for Windows LIVE"

Many games have migrated away from Microsoft’s PC gaming platform to Steam. If you purchased the game in the past–whether you bought a physical retail copy, digital download, or even a copy from Microsoft’s Games for Windows Marketplace–you can often convert that old GFWL-tainted copy to a modern one that will work properly.

The following games allow you to redeem them on Steam if you have a retail key or one provided by GFWL itself. These are big-name, big-budget games, and that’s no accident. Publishers and developers haven’t bothered removing GFWL from many older games that didn’t do so well.

  • Batman: Arkham Asylum
  • Batman: Arkham City
  • Bioshock 2
  • Dark Souls: Prepare to Die Edition
  • Dead Rising 2
  • Dead Rising 2: Off the Record
  • DiRT 3
  • Resident Evil 5
  • Super Street Fighter IV: Arcade Edition

If you have a code for one of these games, you can redeem it on Steam. Install Steam and launch it. Click the “Games” menu, select “Activate a Product On Steam,” and enter the game’s product key to redeem it on Steam. The version Steam installs will be the latest one without GFWL.

Crack GFWL Out of the Game

Some of the bigger, more popular games have third-party tools that can effectively crack Games for Windows LIVE out of the game. These tools aren’t intended for piracy or cheating in multiplayer–in fact, they disable access to multiplayer if a game does contain multiplayer. They’re just intended for removing the hassle of GFWL. Such modifications aren’t available for every game–just particularly popular ones.

  • Fallout 3: The Games for Windows Live Disabler from Nexus Mods will disable GFWL. FOSE, the Fallout Script Extender modding tool, also disables GFWL.
  • Grand Theft Auto IV: The XLiveLess modification will remove GFWL from the game and ensure save games function properly. It also disables access to multiplayer features.
  • Grand Theft Auto: Episodes from Liberty City: XLiveLess functions for Episodes from Liberty City, too.
  • Halo 2: XLiveLess for Halo 2 promises to remove GFWL from from Microsoft’s second Halo game, which Microsoft no longer supports or even sells.
  • Red Faction: Guerilla: XLiveLess will also remove GFWL from the original version of this game. The latest versions of this game available on Steam no longer have GFWL, but old product keys for this game can’t be activated on Steam.

You may need a file extraction program like 7-Zip to extract these downloads. Follow the instructions in the download’s readme file to learn how to install whichever modification you downloaded and ensure it works properly.

Update Your GFWL Client Software

If you’re stuck playing a game that requires GFWL on modern versions of Windows and no alternative versions or cracks are available to help you disable them–or if you’d just like to use GFWL anyway–you can make GFWL function. Despite Windows 10’s assertion that Games for Windows LIVE isn’t compatible with modern versions of Windows, it can work.

The problem is that games that require GFWL include their own GFWL installers. When you install one of these games on a modern version of Windows, it installs an old version of GFWL that won’t function properly. Rather than attempting to update itself, GFWL will just fail to work properly without giving you any indication of what’s wrong and games won’t even launch or provide an error message.

To fix this problem, download the latest version of Games for Windows LIVE from Microsoft’s website and install it. After you install the latest version, GFWL-enabled games should launch and function. They may not work perfectly, of course. For example, we had to use the keyboard to navigate the GFWL interface in one particular game on Windows 10, as the mouse didn’t work properly. The “Tab” and “Enter” keys were essential for navigating the interface.

Create a Local Profile

You can avoid online-connectivity and syncing problems that can interfere with your gameplay by creating a local profile (in other words, an offline profile) rather than an online profile in GFWL. This will work for most games, although you’ll have to create an online profile if you want to use multiplayer features. This will also allow you to play GFWL-enabled games if you’re outside one of the 42 supported countries where GFWL and Xbox services are available. You’ll know if you are, because GFWL will show you an error message.

To do this, open the GFWL interface by pressing the “Home” button on your keyboard while in any GFWL-enabled game and choose “Create New Profile.” Scroll down on the Create Gamer Profile screen, click “Create a Local Profile,” and enter the details you want to use.

You’ll lose any save files if you do this while playing a game. Those save files are associated with your online profile if you’re already using one of those, so you’ll have to switch back to the other profile to regain access to your saves. This is best done when setting up GFWL for the first time.

Fix Online Connectivity Problems

If you’re having issues connecting to other players in GFWL games, you may be in some trouble. Microsoft no longer actively maintains this stuff and there’s no guarantee you’ll have a good experience even if you can connect, so just bear that in mind. We’ve had a lot of problems.

However, you can make online connectivity work by messing with your firewall settings. Microsoft recommends three things:

  • Enable UPnP on your router. This allows GFWL to automatically forward the ports it requires to connect to other players. UPnP is a security concern, but you can always disable it when you’re done with the game.
  • Open the following ports for both inbound and outbound traffic, if you don’t want to enable UPnP. You’ll have to allow these ports in any advanced firewall software you’re running. However, for most people, you’ll just need to forward these ports on your router. We recommend just using UPnP, but here are the ports GFWL requires: TCP port 3074, UDP port 88, and UDP port 3074.
  • Allow the GFWL client through your firewall. If you’re using firewall software, ensure the GFWLClient.exe program found at C:\Program Files (x86)\Microsoft Games for Windows Live\Client is allowed to communicate with both inbound and outbound connections.

That’s a good place to start, and should solve most issues–at least most solvable ones. Microsoft also provides a long guide to troubleshooting GFWL connection problems. Consult the official guide if you need more help.


For more information, check the List of Games for Windows – LIVE games list on the PC Gaming Wiki website. It provides an exhaustive list of GFWL-enabled games and the state of their support.

If you’re experiencing other problems, the PC Gaming Wiki website also offers a good article on troubleshooting more obscure GFWL errors that may bite you.

Источник: https://www.howtogeek.com/245780/how-to-make-games-for-windows-live-games-playable-on-windows-10/

Buy DiRT Rally 2.0 CD Key Compare Prices

STEAM EMEA KEY : What is Steam Key EMEA signification? EMEA means for Europe, Middle East and Africa and several other countries. Please read the store description about country and language restrictions to know which are concerned. Use the key to Download and play DiRT Rally 2.0 on Steam.

EU STEAM CD KEY: Requires an EUROPEAN IP address or you must activate it with a VPN (Virtual Private Network) in order to play DiRT Rally 2.0. Might have languages restrictions or language packs. Read the description on the store game page to know if the EU IP is only needed for activation or for playing also (maybe on EU Servers). Most of the stores offer you their help, or show you how to do this with a tutorial to follow.

EUROPEAN STEAM GIFT : It’s a steam gift for Europe which requires an European IP address to activate and to play DiRT Rally 2.0 on Steam. Read carefully the store description about region and language restrictions.

STEAM GIFT : A Steam gift is a one-time transfer you receive. You activate and install DiRT Rally 2.0 to play on Steam, it is a non-refundable game that stays in your Steam games collection. Please read the store description about any language or region restrictions.

STEAM CD KEY : Use the Steam Key Code on Steam Platform to download and play DiRT Rally 2.0. You must login to your Steam Account or create one for free. Download the (Steam Client HERE). Then once you login, click Add a Game (located in the bottom Left corner) -> Activate a Product on Steam. There type in your CD Key and the game will be activated and added to your Steam account game library.

Windows 10 Global : This is an Worldwide Microsoft code to play on PC for Worldwide. You need to have installed Windows 10 Anniversary Edition update on your PC. Log into your Microsoft account to download and play. Read closely the description given by the store to activate your game.

Bundle

Bundle 1

Dayone Edition

Deluxe Edition

Game Of The Year Edition

Preorder bonus

Standard Edition

Super Deluxe Edition

Leave a comment

You must be logged in to post a comment.

Источник: https://www.allkeyshop.com/blog/buy-dirt-rally-2-0-cd-key-compare-prices/

Wm048521 Helix 6000 Iec Def

Helix™
WM048521

Rev 07 - PRELIMINARY

AE
Read this manual before starting any installation, service, or maintenance work
Fuel dispensers contain both electrical components and a hazardous, flammable and poten-
tially explosive liquid. Failure to follow the below precautions and the Warning and Caution
instructions in this manual may result in serious injury. In addition, it is your responsibility to
follow all rules, codes, regulations, and laws that apply to your location and type of work being
performed.

Safety precautions
Make sure that ALL power to the dispenser is turned OFF before opening the cabinet or
starting work. Physically lock, restrict access to, and/or tag the circuit breakers you turn off.
In addition, be sure to trip (close) all emergency valves under the dispenser (if installed)
BEFORE you begin.
Make sure that you locate the facility’s emergency shut-off button, and know how to turn OFF
power to the dispenser and submersible pumps (if any) in an emergency.
Never allow a leaking pump to run! Use appropriate measures to clean up any fuel on the
forecourt, and ensure that any leaks or issues that could cause a leak are attended to and
repaired immediately.

Indicators and notations

Note!
Indicates extra information or tip.

NOTICE!

Highlights an essential element of a procedure to


help ensure accuracy, completeness, and appro-
priate performance.

CAUTION!

Indicates a potentially hazardous situation, which


if not avoided, could result in personal (non-lethal)
injury or equipment damage.

WM048521 Rev 07 - PRELIMINARY 11/2014


WARNING!

INDICATES A POTENTIALLY HAZARDOUS SIT-


UATION, WHICH, IF NOT AVOIDED COULD
RESULT IN DEATH OR SERIOUS INJURY.

DANGER!

INDICATES A HAZARDOUS SITUATION, WHICH,


IF NOT AVOIDED, WILL RESULT IN DEATH OR
SERIOUS INJURY.

WM048521 Rev 07 - PRELIMINARY 11/2014


Table of Contents

Table of Contents

1 Introduction . 3
1.1 Dispensers Covered . 3
1.1.1 Wayne iGEM™ Computer Software . 5
1.1.2 Determining Dispenser Sides A & B . 5
1.1.3 Parts of the Pump . 6
1.1.4 Product Liability . 7
1.1.5 Intended Use . 7
1.1.6 What is DEF? . 8
2 Important Safety Items . 9
2.1 Safety Items You Should Know . 9
2.2 Classification Schemes . 9
2.3 Portable Tanks and Containers . 12
2.4 Health Note . 12
2.5 Safety Precautions - Operation and Maintenance . 12
2.6.1 Health and Safety Regulations . 12
2.6.2 Health and Safety Regulations - DEF . 13
2.7 Dispenser Safety Features . 14
3 Operation . 15
3.1 dirt 3 license key.txt download - Free Activators Introduction . 15
3.2 How to Get Service On Your Dispenser . 15
3.3 Infrared Remote Control . 15
3.4 Basic Dispenser Requirements . 16
3.5 Programming Functions . 16
3.6 Access to Functions . 17
3.7 Annunciator Operation Check . 18
3.8 Set Clock Function (F 02) . 18
3.9 Exit Function (F00) . 19
3.10 Password Change (F33) . 20
3.11 Filling Modes (F01) . 21
3.12 Setting Unit Prices . dirt 3 license key.txt download - Free Activators 22
3.12.1 F03 - Set Side A Unit Prices . 22
3.12.2 F04 - Set Side B Unit Prices . 23
3.12.3 Changing the Unit Price (F03) . 23
3.13 Authorizing the Dispenser . 25
3.14 Disable Stand-alone Operation . 25
3.15 Operating the Dispenser . 26
3.16 Initial Delivery . 26
3.17 Restarting After Power Failure or Shutdown . dirt 3 license key.txt download - Free Activators 27
3.18 Cycling Power to Clear Faults . 27
3.19 Error Codes . 27
3.20 Resetting After All Stop . 28

WM048521 Rev 07 - PRELIMINARY 11/2014 1


Table of Contents

3.21 Electronic Totalizer Readings . 29


3.21.1 Totalizer Volume Readings by Meter Position . 29
3.21.2 Electro-Mechanical Totalizer Operation . 29
4 Operator Maintenance . 31
4.1 Hose and Hose Retractor . 31
4.2 Filter / Strainer - Remote . 31
4.3 Dispenser cleaning . 33
4.4 Meter Maintenance . 33

Appendices
A Dissasembly - Recycling . 35
A.1 Empty the fuel out of the pump . 35
A.2 Dispenser recycling . 35
B Declaration of Conformance . 36
C Glossary of Terms and Acronyms . 37

2 WM048521 Rev 07 - PRELIMINARY 11/2014


1 Introduction

1 Introduction

This manual covers general user information on the operation and maintenance of the Wayne®
Helix™ fuel dispenser models outlined in Section 1.1 Dispensers Covered, on page 3.
Computer function settings that are necessary for Helix dispenser operation, such as unit
prices and fueling point ID’s, are also included in this manual. If additional information on
function settings and statistics is required, refer to the Helix Dispenser Service manual
(WM048523).
The following items are required for the operation and maintenance of Helix dispensers:
• Infrared remote control (IR remote or IRC) - Wayne part number (p/n) WM002290
• Printer door key - DHW1 key
• Lower bezel door and sliding bezel tray keys - DW2 key
• Hydraulic door key - Wayne p/n WU007681
Any questions concerning operation of the dispenser that are not covered in this manual
should be referred to your local service provider.

1.1 Dispensers Covered


This manual applies to the following style of Helix dispenser that has been approved by IEC:
• C-Style, Wayne Helix™ 6000 fuel dispenser
• Your dispenser activation is Auto ON
• Your dispenser has a DEF (Diesel Exhaust Fluid) pump
Refer to Figure 1.1 to determine model attributes defined in the model number of the dispenser.
The dispenser model number can be located on the dispenser name plate, receipts, or
shipping documentation and the scope of this manual applies only to the dispenser model
as specified therein.

WM048521 Rev 07 - PRELIMINARY 11/2014 3


1 Introduction

a STYLE e NO. GRADES OUT 1 - 8


C = C-style
If blender, count up +1 per each blending g NO. HOSES / NOZZLE POSITIONS PER SIDE
H = H-style 1 digit = Symmetric. Same number, solution, and
possibility between 2 grades
S = Small Style flows on both sides A & B.
2 digits = Asymmetric. Different number,
solutions, or flows on Sides A & B.
1st Digit = Side A
DESIGN FastStone Capture 9.1 Crack + Keygen Free Download 2019 2nd Digit = Side B
b W = Wide
N = Narrow
H = High Hose
L = Low Hose
a b c de f g h NOTE: The last two positions shown here
X ( X /X ) X X - X X X can contain multiple digits

c ORIENTATION
ID = Island Dual Sided UI
IS = Island Single Sided UI
LM = Lane Mirrored
LU = Lane UnMirrored*

h BASIC TECHNICAL FEATURES


A = Additive
B = Biodiesel
NO. HYDRAULIC C = CNG (Compressed Natural Gas)
d NO. GRADES IN
f POSITIONS D = DEF (Diesel Exhaust Fluid)
1-5
0-5 E = Ethanol
F = Fleet
G = Enhanced Capacity
H = Super-High Capacity
J = Ultra-High Capacity
L = LPG (Liquified Petroleum Gas)
Example: M = Media
P = Payment
H(W/LU)23-21PR R = Remote
S = Suction
T = Terminal
U = 4 Users
*NOTE: The position prior to and
V = Vapor Recovery
following the slash '/' can contain two
W = Main (Back-to-Back)
(2) digits as shown in this example.
X = Back
The 'L' & 'U' specify 'Lane' &
Y = SAT Master (Satellite)
'UnMirrored'.
Z = SAT Slave (Satellite)

Figure 1.1: Helix Model Designation

4 WM048521 Rev 07 - PRELIMINARY 11/2014


1 Introduction

1.1.1 Wayne iGEM™ Computer Software


Helix model dispensers are delivered pre-installed with iGEM computer software, version 62
or later which can also be downloaded via laptop computer by a Wayne certified Service
Technician. ServTerm version 6.1.5 or later is required for servicing (loading the computer
software or dispenser configuration template), however, this is not required for installation
or startup of the dispenser.

1.1.2 Determining Dispenser Sides A & B


Locate the Wayne name plate on the outside of the dispenser. If, while facing the dispenser,
the name plate is on your right side, you are facing side A of the dispenser. If the name plate
is on the left side, you are facing side B of the dispenser.

WM048521 Rev 07 - PRELIMINARY 11/2014 5


1 Introduction

1.1.3 Parts of the Pump

electronic head

nozzle boot

nozzle

hose
hydraulic door lock

hydraulic module cabinet

base frame

Example shown is an Helix 6000 DEF fuel dispenser


Figure 1.2: Dispenser

6 WM048521 Rev 07 - PRELIMINARY 11/2014


1 Introduction

sales / volume / price display

VGA display

softkeys

printer door lock

keypad
card reader

Example shown is an Helix 6000 - DEF fuel dispenser


Figure 1.3: Dispenser Bezel

1.1.4 Product Liability


Wayne declines all responsibility for product liability if any modifications, additions, etc., have
been made to the equipment without the written consent of Wayne.

1.1.5 Intended Use


The pump is designed and approved for measuring and movement of a Diesel Exhaust Fluid
(DEF) in correct quantities, from tank to vehicle.

WM048521 Rev 07 - PRELIMINARY 11/2014 7


1 Introduction

1.1.6 What is DEF?


Diesel Exhaust Fluid (DEF), also referred to as AdBlue® in Europe, is a very aggressive
chemical fluid made of an aqueous urea solution of 32.5%, however, it is not flammable. It
is used for injection to the exhaust system of a vehicle to improve the catalytic process. Be-
cause of this, it is extremely sensitive to contamination from other fluids, metals, dust, dirt,
etc. The only approved testing liquid during production is distilled water that does not contam-
inate the urea product. There is always distilled water remaining in valves and other fragile
parts and as distilled water has a freezing point of around 0 degrees Celcius it means that
DEF equipment has to be kept above freezing point during all phases of transportation, de-
livery, installation, and operation.
AdBlue® is a registered trademark of Verband der Automobilindustrie e.V.

8 WM048521 Rev 07 - PRELIMINARY 11/2014


2 Important Safety Items

2 Important Safety Items

2.1 Safety Items You Should Know


• Know how to turn OFF power to the dispenser in an emergency.
• Know how to turn OFF power to submersible pumps in an emergency.
• Regularly inspect all external fuel carrying components such as hoses, nozzles, break-
aways, etc. for damage or leaks.
• Regularly inspect dispenser housing parts for damage or leaks.
• Have all leaks or defects repaired immediately.
• Test the Emergency (Shear) Valve by opening and closing several times at least once
per year.
• Use of automatic safety nozzles prevents overfilling fuel tanks and avoids spilling fuel.
• Avoid tipping the nozzle downward and spilling excess fuel.
• Sufficient lighting must be provided to allow safe use of the dispensers.
• A clearly visible and identifiable station Emergency Stop Switch must be provided at the
station to shut OFF power to all station dispensers and submersible pumps in case of an
emergency.
• Portable tanks (containers) of 12 gallons (45 liters) or less shall not be filled while they
are in or on a motor vehicle. See Warning information about this subject in the following
section.
• Hose retractor mechanisms are spring loaded and can pose a possible injury.
• Stow hoses to prevent tripping and falling.
• Care should be taken to prevent fuel spillage. If spillage occurs, clean up immediately.
• Know the Hazardous Zone area around the dispenser.

2.2 Classification Schemes


Zones Risk Types Protection Class Example

0 A risk area where explosive gas mix- Exia icare data recovery crack kickass - Crack Key For U In a tank


ture exists all of the time or during a
long period.
1 A risk area where explosive gas mix- Exd, Exe, Exib, Within the meter
ture may occasionally exist during nor- Exp, Exia, Exs (within the hy-
mal operation. draulic areas and
column of the
pump)

WM048521 Rev 07 - PRELIMINARY 11/2014 Voxal Voice Changer 4.04 Crack Registration Code Free 9


2 Important Safety Items

Zones Risk Types Protection Class Example

2 A risk area where explosive gas mix- Exd, Exe, Exib,


ture is not expected to exist during Exp, Exia, Exs,
normal operation and, if it does exist Exo, Exq
anyway, it will be infrequent and for a
short period of time.

10 WM048521 Rev 07 - PRELIMINARY 11/2014


2 Important Safety Items

WM048521 Rev 07 - PRELIMINARY 11/2014 11


2 Important Safety Items

INSERT CLASSIFICATION SCHEME HERE

2.3 Portable Tanks and Containers


Portable containers of 12 gallons (45 liters) or less shall not be filled while they are in or on
a motor vehicle. Filling portable containers, especially when they are sitting on a non-conduc-
tive surface such as a floor mat or a plastic bedliner in the back of a pick-up truck, can present
a possible safety hazard and should be avoided as so stated in the following WARNING:

WARNING!
FIRE HAZARD!

The flow of gasoline through the dispenser nozzle


can produce static electricity which can cause a
fire if gasoline is pumped into an ungrounded
gasoline container. To avoid static buildup and the
possible resulting serious injury:
• Place approved container on the ground. Do
not fill the container in the vehicle or truck bed.
• Keep the nozzle in contact with the can or con-
tainer while filling. Do not use an automatic
pump handle (latch-open) device.

2.4 Health Note

WARNING!
Toxic Substances!

Be advised that contact with petroleum fuel and


inhalation of fuel vapors can cause serious damage
to your health.

2.5 Safety Precautions - Operation and Maintenance


• Only persons knowledgeable in performing the required maintenance shall perform the
work.
• All electrical power to the dispensing device and pump servicing the dispenser shall be
shut off at the main electrical disconnect panel.
• All vehicle traffic and unauthorized persons shall be prevented from coming within 20 feet
(6 meters) of the dispensing device.

2.6.1 Health and Safety Regulations


It is important that the following rules and regulations are followed when flammable liquids
are used:

12 WM048521 Rev 07 - PRELIMINARY 11/2014


2 Important Safety Items

• It is prohibited to smoke and light fire or bring open flame close to the pump.
• Stop the engine while refuelling.
• The distribution box must be easily accessible and access must not be blocked by goods
etc.
• Always ask a specialist to make electrical installations of any kind. Special regulations are
applicable!
• Please watch for any leakage from pumps. If there is a leakage, cut all power to the pump
and call Wayne After Sales Service.
• Always comply with the regulations regarding handling of petrol and oil, published by each
oil company.
• Always comply with public authority requirements related to the vapor recovery system.
• Make sure that a suitable fire extinguisher is in place and is easily accessible.
• To avoid malfunction or damage to the pump, make sure that there is enough fuel in each
tank.
• Adequate personal safety equipment should be used during maintenance of the equipment
(gloves, breathing mask, glasses etc.).

2.6.2 Health and Safety Regulations - DEF


It is important that the following rules and regulations are followed:
• The dispenser must be placed outside hazardous areas.
• The distribution box must be easily-accessible and may not be blocked by goods or other
items.
• Always let specialists make electrical installations of all kinds. Special regulations apply!
• Please pay attention to any leakage from the dispenser. If there is a leak, cut the power
to the pump and call Wayne After Sales Service at ( PHONE NUMBER HERE).
• Always follow all regulations regarding handling of Urea published by each distributor or
supplier.
• The customer must ensure that DEF does not come in contact with the skin or eyes while
re-filling. It is the responsiblity of the station owner to post applicable warning and caution
statements and/or stickers in a place on the dispenser that is visible to the customer.
• To avoid incorrect function or damage to the pump, ensure that there is enough Urea liquid
in the front.
• Adequate personal safety equipment should be used during maintenance of the equipment
(gloves, safety glasses, etc.)

Note!
To prevent damage in the hydraulic cabinet dispenser doors should be in place during rainy
and/or icy weather conditions. Also, check the nozzle boot flipper (if present) for freedom of
movement. If ice or snow has formed on the flipper, it should be cleared to prevent unecessary
damage.

WM048521 Rev 07 - PRELIMINARY 11/2014 13


2 Important Safety Items

2.7 Dispenser Safety Features


Helix dispensers come equipped with certain features that increase the safety of those persons
who come in contact with the dispenser, including customers, store employees and mainte-
nance technicians. Inclusion of these features depend upon the installation location and ap-
plicable laws and regulations.
• Emergency Shut-off (Shear) Valves - (optional)
An emergency valve is designed to close the product line in case of shock or fire. The
shear valve functions if the dispenser is knocked out of position.
• Hose Retractor
Helix dispensers are equipped with a hose retractor that will break away from the dispenser
in the event that a customer drives off while the hose is still attached to the vehicle.

Note!
On dispensers equipped with the Hose Retractor option, the hose clamp must be mounted
upstream of the breakaway device to avoid damage to the dispenser in the event of a
drive-off.

The combined hose, breakaway, and whip maximum lengths are listed in the table below.

Crossover Type Loopback Type Loopback Type


1 Hose per Side 1 Hose per Side 2 Hoses per Side

14' 0" (4.27m)


Non-Vapor 3/4” (19.050 10’ 0’’ (3.05 m) 10’ 0’’ (3.05 m)
mm)
Non-Vapor 5/8” (15.875 14’ 0’’ (4.27 m) 14’ 0’’ (4.27 m)
mm)

• Break-away Hose (optional)


Some Helix dispensers are equipped with a hose that will break away from the dispenser
in the event that a customer drives off while the hose is still attached to the vehicle. AL-
WAYS contact an authorized service provider after a breakaway accident. The following
parts must always be changed: Breakaway Valve (WM002174).

14 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

3 Operation

3.1 Introduction
You will need to access the maintenance mode in order to program functions and/or view
statistics. The function and statistics data appear in the money, volume, and unit price display
windows. The infrared interface is similar to a television remote control. It has 16 buttons and
is used to access dispenser functions. This interface uses only the pump display for user
feedback. There is no additional display. Refer to Section 3.3 Infrared Remote Control, on
page 15.

3.2 How to Get Service On Your Dispenser


Trouble with the operation of the dispenser should be referred to your local Wayne authorized
service personnel or call the your local service provider.

Note!
Any modification, repair, or service to the dispenser not in accordance with the original design
may invalidate compliance with the equipment certifications such as CE Marking, UL-listing,
etc. Consult manufacturer as necessary.

3.3 Infrared Remote Control


The Infrared Remote Control (IRC or IR remote) is used to access dispenser functions and
sub-functions, and diagnostics (statistics). When held close to the infrared eye on the display
board, the remote can be used to set unit prices, fueling point IDs, and read electronic total-
izers.

Figure 3.1: Infrared Remote Control (IRC or IR Remote)


A description of each key on the IR remote is given in the following table.

IRC When F - - When F 'xx' When xx.xx sub-


keys is shown on the is shown on the function
unit price display unit price display is shown on the
unit price display

NEXT F00 Next higher func- Next higher sub-


tion # function level

WM048521 Rev 07 - PRELIMINARY 11/2014 15


3 Operation

IRC When F - - When F 'xx' When xx.xx sub-


keys is shown on the is shown on the function
unit price display unit price display is shown on the
unit price display

UP S - - (statistics Next higher func- Next higher sub-


mode) tion # function level
DOWN S - - (statistics Next higher func- Next higher sub-
mode) tion # function level
ENTER Pressing 3 times sub-function level Back to function
will exit configura- (xx.xx) level (except while
tion mode without entering new val-
saving ue, it displays the
change)
CLEAR n/a F-- Back to function
level (except while
entering new val-
ue; can be used to
erase last digit
typed)
# n/a n/a Must use this key
to enter new data
DIGITS After pressing EN- After pressing EN- If you clear the
TER, will take you TER, will take you display with the
to the Function to the Function "#" key first, it will
level of the digits level of the digits change the value
entered entered of the sub-function
to the digits en-
tered after press-
ing ENTER

Note!
When in Statistics mode (S - - ) or (S "xx") are shown on the Unit Price Display, the above
commands work the same way.

3.4 Basic Dispenser Requirements


Unit prices must be set and the dispenser must be authorized for the dispenser to operate.
If the dispenser is connected to a POS control system and you want to operate the dispenser
in the stand-alone mode independently from the control system, perform the following steps:
• Use IR remote control and set the Filling Mode to Stand-alone.

3.5 Programming Functions


• Change Unit Price (F03)

16 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

• Exit Function (F00)


• Filling Modes (F01)
• Password Change (F33)
• Access to Functions

3.6 Access to Functions


Press the CRC button on the iGEM board.
Access the programming mode by pressing one of the following keys on the remote control:

"1" Station manager entry using the station manager password


"2" Operator entry using the operator password

The programming mode asks you for a password twice before allowing access to the functions.
A 10-second time-out is built into the password entry code.
After 3 seconds the display shows:

When the word PASS 1 appears on the sales display, you have 20 seconds to start entering
the password entry code. The timer restarts after you press a key. When you finish entering
the password, press <ENTER> (=E).
PASS 2 appears in the sales display window, prompting you to enter the password again.
The display shows:

Note!
If you press nothing more, press <ENTER> (=E) or press the wrong password, or there is
no confirmation after pressing the password and the <ENTER> key, the computer will leave
this function automatically after 10 seconds.

Note!
If you press the wrong keys, press <CLEAR> (=C) key to erase the last digit you typed.

Press again the pasword to confurm and press <ENTER>.


Press <ENTER>.
The display shows the Function screen:

WM048521 Rev 07 - PRELIMINARY 11/2014 17


3 Operation

When you enter the programming mode, the unit price display windows show "F - -", the
money display window shows the software version number, and the volume display window
shows the software version number, and the volume display window shows the date of the
software version. To edit or view specific functions, enter any function number using the
number keys and press <ENTER>. The corresponding number appears in the money display
window.

3.7 Annunciator Operation Check


Check that the annunciator (beeper or buzzer) is operating properly on each side of the dis-
penser. When pressing the keys on the CAT keypad or the Push-to-Start / Grade Select
buttons on the bezel, you should hear the annunciator beep.

3.8 Set Clock Function (F 02)


Function F02.00 displays the time (HH.MM), F02.01 is the date (MM.DD) and F02.02 is the
year (YY.YY)

IRC Command Volume Display Status Display Unit Price Dis-


play

Press either EN- PASS 1


TER, 1, or 2, de-
pending on access
level
Type the corre- PASS 2
sponding pass-
word
Press ENTER
Type the pass- iGEM software Date F--
word again setting
Press ENTER
Type 2 ------ F 02
Press ENTER
Press ENTER ------ Time in HH.MM 2.00
format
Press # Time in HH.MM 2.00
format

18 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

IRC Command Volume Display Status Display Unit Price Dis-


play

Type the current ------ Entered time in 2.00


time in 24-hour HH.MM format
format of HH.MM
- Press ENTER
Press NEXT ------ Date in MM.DD 2.01
format
Press # date in MM.DD 2.01
format
Type the current ------ entered date in 2.01
date in the format MMDD format
of MMDD
- Press ENTER
Press NEXT ------ year in YYYY for- F 02
mat
Press # year in YYYY for- F 02
mat
Type the current ------ current year in F 02
year in the format YYYY format
of YYYY
- Press ENTER
Press ENTER ------ F 02

3.9 Exit Function (F00)


Use this function to select one of three maintenance mode exits.

Press 00
Press <ENTER> the display shows:

Press <ENTER> the display shows:

WM048521 Rev 07 - PRELIMINARY 11/2014 19


3 Operation

Press <#> the display shows:

Select one of three mainte-


nance mode exits:
01 = Do not exit and do not save changes
02 = Exit, but do not save changes
03 = Exit and save changes
Press <ENTER> If you have entered 03, the display
shows:

Press <ENTER> the display shows:

3.10 Password Change (F33)


For access to functions, see Section 3.6 Access to Functions, on page 17
Select this function to change the password.

Press 33
Press <ENTER> the display shows:

Press <ENTER> the display shows:

Select the sub-function with


<NEXT>:
33.01 Station Manager Password
(max. 6 characters)
33.02 Station Operator Password
(max. 6 characters)

20 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

Press <#>, the money display Dashes appear instead of regular en-
goes blank. tries, as shown:
Enter the new password.

Press <ENTER> the display shows:

Enter the new password twice Dashes appear instead of the regular
(2 times) entries:

Press <ENTER> If the password is correct, the dashes


and PASS flashes

Press <ENTER> If the password was changed, the


dashes flash

Note!
Use F00 Exit Function - Option 3 to exit and save changes.

3.11 Filling Modes (F01)


For access to functions see Section 3.6 Access to Functions, on page 17
Select this function to change the Filling Mode.

Press 01
Press <ENTER> the display shows:

Press <ENTER> the display shows:


(the actual status is shown on volume display)

Press <#> the amount shows blanks:

WM048521 Rev 07 - PRELIMINARY 11/2014 21


3 Operation

Enter the new Fill- dirt 3 license key.txt download - Free Activators (the new Operating mode is shown on amount
ing Mode display)

1 = Serial Mode - dispenser controlled by site con-


troller via serial link.
2 = Stand Alone Mode - dispenser not supervised
by a site controller
3 = Serial W&M mode - same as #1 but 3 volume
decimals
4 = Stand Alone W&M - same as #2 but 3 volume
decimals
5 = Serial W&M Mode - ATC, inspection of tempera-
ture compensation
6 = Stand Alone W&M Mode - ATC, inspection of
temperature compensation
Press <ENTER> the display shows:
the new Operating mode is shown on volume dis-
play

Press <ENTER> If the Filling Mode was changed, the dashes flash

Note!
To exit and save changes uses F00 Exit Function, option 3.

3.12 Setting Unit Prices

3.12.1 F03 - Set Side A Unit Prices


Sub-function numbers are in the format below.
.0N Set prices
.1N Not used (Set cash prices)
N Logical nozzle number 1-4 (5-8 (optional)

Note!
The Unit Prices are initialised after Coldstart to 99.01, 99.02, 99.03, 99.04 and so on.

22 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

3.12.2 F04 - Set Side B Unit Prices

Note!
The Unit Prices are initialised after Coldstart to 9911, 9912, 9913, 9914.

3.12.3 Changing the Unit Price (F03)


If a control system is connected, its prices override the prices in the pump and the prices
programmed in this sub-function are not used.

3.12.3.1 Changing Prices on Side A


For access to functions go to Section 3.6 Access to Functions, on page 17.
The display shows the function screen.

Press 03 The display shows:


Press <ENTER>

Press <ENTER> The display shows:

Note!
To access the other unit price, press <NEXT>

Sub-function 3.01 is responsible for changing unit price of fuel at nozzle 1 on side A and so
on, according to the table below.

Sub-Function Nozzle Side


Credit Prices (Position)

3.01 1 A
3.02 2 A

Sub-Function Nozzle Side


Cash Prices (Position)

3.11 1 A
3.12 2 A

Example: I have two pumps programmed to a unit


price of €1.300 and want to change to €1.420.
Perform the following steps:

WM048521 Rev 07 - PRELIMINARY 11/2014 23


3 Operation

Press the <#> key. The dotted part on


paying total of dis-
play will be erased.

Enter the desired value


Example: 1420

Press <ENTER> The display shows:

To change from one sub-functon to another use


the <NEXT> key.
(Example: from 3.01 to 3.02)
The same procedure applies to change the cash
proces
(Sub-functions 3.11 to 3.12)
To SAVE all changes, follow EXIT procedure of
"F00" exiting, value 3. (Refer to table)

3.12.3.2 Changing Prices on Side B


Sub-function 4.01 is responsible for changing unit price of fuel at nozzle 1 on side A and so
on, according to the table below.

Sub-Function Nozzle Side


Credit Prices (Position)

4.01 1 B
4.02 2 B

Sub-Function Nozzle Side


Cash Prices (Position)

4.11 1 B
4.12 2 B

Example: I have two pumps programmed to a unit


price of €1.300 and want to change to €1.420.
Perform the following steps:

24 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

Press the <#> key. The dotted part on


paying total of dis-
play will be erased.

Enter the desired value


Example: 1420
Press <ENTER> The display shows:

To change from one sub-functon to another use


the <NEXT> key.
(Example: from 4.01 to 4.02)
The same procedure applies to change the cash
prices.
(Sub-functions 4.11 to 4.12)
To save all changes, follow exit procedure of "F00"
exiting, value 3.

3.13 Authorizing the Dispenser


The dispenser must be authorized before it will dispense product.
The dispenser filling mode is set in programming function F01. In stand-alone mode (not
connected to a control system), the dispenser is always authorized.
When connected to a control system, the system programming determines authorization.

3.14 Disable Stand-alone Operation


Once the dispenser is switched over to the POS control system, standalone operation may
not be required. As an extra security measure, the jumper that enables stand-alone operation
may be removed. The jumper (J6) is located on the unit price display board as shown in
Figure 3.2.
1 Access dispenser Filling Mode function F 01 and set sub-function to 1.01 for serial mode.
2 Open the service door.
3 Remove the J6 jumper from the Unit Price Display board (Figure Figure 3.2).
4 Close and lock the service door.

WM048521 Rev 07 - PRELIMINARY 11/2014 25


3 Operation

J6 jumper

Figure 3.2: Sales Display with J6 Jumper

3.15 Operating the Dispenser


1 Remove the nozzle from the nozzle boot for either the blended hose or the single product
hose. The nozzle boot switch will turn on. The unit price displays of the product(s) not
selected will show dashes.
2 Push a grade selection button for the desired product to select one of the products from
the blending hose, or the one product from the single product hose. The dispenser will
reset and prepare for delivery. The sale display will show all eights, then blanks, then the
money and volume portion of the display will reset to zero. The unit prices not selected
will be blank or show dashes. The grade selection button that was pressed will be contin-
uously lit; the others will be dark. The correct pump(s) will start at the beginning of the
reset cycle and the solenoid valve(s) will open approximately three seconds later. Product
selection can be changed any time before product flow is sensed by the computer.
3 Dispense product. (Pressing the optional Stop button will stop product flow only. The
nozzle boot switch must be cycled and the dispenser must then be reset before that side
of the dispenser can continue operation.)
4 Return the nozzle to the nozzle boot. The nozzle boot switch will turn off; the sale will be
complete and ready to pay.

3.16 Initial Delivery


To dispense product from a newly-installed dispenser, make sure unit prices are set (as
previously described) and proceed as follows:
1 Authorize the dispenser.
2 Remove the nozzle, start the reset sequence and observe the reset cycle; make sure all
sales display and unit price display elements operate.
3 Check that when reset is started, the correct submersible pump motor is activated, and
at the end of the display reset (approximately three seconds) the solenoid valve(s) opens
(listen for the audible click of the valve(s).

26 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

4 After verifying air is bled properly from each trunk line, slowly dispense product through
each dispenser until free of air. Dispense enough product through each hose of each
dispenser to ensure the dispenser and the lines are free of air, before checking the meters.

Note!
Make sure the product lines are properly bled before dispensing any product through a
remote dispenser.

3.17 Restarting After Power Failure or Shutdown


After loss of power, the display accurately displays the amount of the sale, in money and
volume, for approximately 15 minutes. When power is restored, all sales information returns
to the displays. Any sales in progress will be ended; old sales should be paid and the dispenser
reauthorized if more product is to be dispensed.
If the dispenser does not operate properly when power is restored (does not deliver product,
or does not reset), record both the money and volume shown on the display (so sales can
be paid for) and perform the following:
1 Ensure all nozzles on the side are in their nozzle boots.
2 Authorize the dispenser.
3 Remove the nozzle from the nozzle boot. The dispenser should operate normally. If the
dispenser does not resume normal operation, try cycling power as described in the next
section.

3.18 Cycling Power to Clear Faults


If a fault in the dispenser is detected by the computer, an error message will be displayed in
the sale display as described in Section 3.19 Error Codes, on page 27. Record the displayed
error message. It may be possible to restart the dispenser by following the sequence below:
1 Ensure all nozzles are properly seated in the nozzle boot.
2 Turn the control power circuit breaker OFF for approximately five seconds. The dispenser
annunciator will sound. Turn the control power circuit breaker ON; the dispenser annunci-
ator will again sound.
3 Authorize the dispenser.
4 Remove the nozzle from the nozzle boot. The dispenser should operate normally.
If it is not possible to restart the dispenser using this procedure, or if an error message con-
tinues to be displayed, consult appropriate service personnel. Be certain to give the service
personnel the amount at which the dispenser stopped and the exact error message.

3.19 Error Codes


Computer error codes can be displayed on the side of the dispenser where the error occurred
by accessing the sub-functions S21.XX for Side 1 and S22.XX for Side 2, where XX is between
01 and 50 and represents the error/events records maintained by the computer program -
with 01 being the most recent. The computer can store up to 50 errors per side, continuing
to store errors beyond the 50th by cycling the error buffer with new errors inserted at the top
of the buffer. When this happens, an error is deleted at the bottom of the buffer for every new
error that is inserted in the top of the buffer.

WM048521 Rev 07 - PRELIMINARY 11/2014 27


3 Operation

Errors are displayed in an alternating 2-page format. Information in the error pages is given
below.

Page 1 error information Page 2 error information

HH.MM MM.DD.YY
CC.DD.NN C

Where: Where:
HH = hour MM = month
MM = minute DD = day
CC = error code YY = year
DD = device number C = filing count
NN = logical nozzle number

The complete description of the error codes is given in the Helix Programming Manual (p/n
WM048525).
Computer errors are read by entering the Maintenance Mode and accessing the correct
statistical function and its sub-functions. Perform the following steps using the remote control.
Bold type denote remote control function; italicized type represents dispenser response.
Accessing the error code Sub-function.
1 Press ENTER. PASS 1 (enter password).
2 Press ENTER. PASS 2 (enter password).
3 Press ENTER. The unit price display will show F.
4 Press either UP or DOWN to enter the statistics viewing mode. The unit price display will
show S— indicating that a number needs to be selected.
5 Press 21 to access S21 (error data for Side 1 or A which is the junction box side).
6 Press ENTER. The unit price display will show 21.01, the first and most recent error data
for Side 1. The data will be displayed in the 2-page format described earlier, in an alternat-
ing sequence, at a 1 second per page rate.
7 Pressing NEXT accesses 21.02 and the display shows information for the second error
logged. By pressing NEXT, the error buffer can be viewed completely.
8 To exit, press CLEAR, then UP or DOWN. The unit price display will show S—.
9 Press ENTER three (3) times to exit to the normal display.

3.20 Resetting After All Stop


This section applies to Helix dispenser models connected to a Point of Sale (POS) system.
Pressing the All Stop key on the POS system sends a signal to the dispenser computer to
interrupt product flow.
To resume product flow, refer to the applicable manual for the Point of Sale system used at
your location.

28 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

3.21 Electronic Totalizer Readings

3.21.1 Totalizer Volume Readings by Meter Position


Meter volume totals are stored in statistical functions that are accessed using the remote
control. The totals for Side 1 are stored in function S05 and those for Side 2 are stored in
function S06. The value of the meter totals are stored in the sub-functions that take the format
.M0, where M is the meter number. For example, M=5 for the high feedstock iMeter located
on Side 1 of a remote series blender. For Side 2 of the same meter, M=1.
Meter electronic totalizers are read by entering the Maintenance Mode and accessing the
correct function and associated sub-functions. Perform the following steps using the remote
control. Bold type denote remote control function; italicized type represents dispenser re-
sponse.
Accessing the Meter Volume Totalizer Sub-function for Side 1:
• Press ENTER
PASS 1 (enter password).
• Press ENTER
PASS 2 (enter password).
• Press ENTER. The unit price display will show F.
• Press either UP or DOWN arrow to enter the statistics viewing mode. The unit price display
will show S— (indicating that a number needs to be selected).
• Press 05 to access S05.
• Press ENTER. The unit price display will show S05 (indicating that the statistical function
has been accessed).
• Press ENTER to access the sub-functions of S05. The unit price display will show 5.10
(note here that M=1).
Consecutive pressing of NEXT will allow access to the next sub-function, incrementing the
value of M by (.1). For example, to access S05.20, press NEXT. The unit price display will
show 5.20. The value of the meter volume totals is shown in a format such that the least
significant six (6) digits of the data value appear on the volume display, while higher order
non-zero digits of the data value, if present, appear on the money display. Leading zeros
appear as blanks.
Quick Exit
1 Press the CLEAR key until the unit price display window shows S - - .
2 Press ENTER three times. This causes the maintenance mode task to immediately termi-
nate.

3.21.2 Electro-Mechanical Totalizer Operation


Totalizers are optional on Helix dispensers. Electro-Mechanical totalizers are located on the
junction box side of the dispenser. There is one totalizer for each meter. The totalizer positions
on the bezel relate to the meter position numbers. The physical position of the totalizers, left
to right, on the bezel represent meter positions.

WM048521 Rev 07 - PRELIMINARY 11/2014 29


3 Operation

The totalizer shows seven digits and reads in whole units (gallons or liters). Fractional amounts
that are left over from a previous sale are stored in the dispenser computer. When the next
sale of the same product ends, if the fractional amounts from the new sale and previous
sale(s) combined are one (1) whole unit or greater, the Electro-Mechanical totalizer is adjusted
one whole increment; i.e., if five consecutive sales end with a fractional amount of .2, the
Electro-Mechanical totalizer will not account for the fractions until after the fifth sale.

30 WM048521 Rev 07 - PRELIMINARY 11/2014


4 Operator Maintenance

4 Operator Maintenance

CAUTION!
Fire Hazard!

Do not re-install a broken break-away valve. In-


stalling a damaged valve may result in a hazardous
condition that could result in serious injury by fire
or explosion.

Note!
To prevent damage to components located in the hydraulic cabinet, dispenser doors should
be in place during rainy and/or icy weather conditions.

4.1 Hose and Hose Retractor

Note!
On dispensers equipped with the Hose Retractor option, the hose clamp must be mounted
upstream of the breakaway device to avoid damage to the dispenser in the event of a drive-
off.

The combined hose, breakaway, and whip maximum lengths are listed below.

Crossover type Loopback type Loopback type


1 hose per side 1 hose per side 2 hoses per side

14 ft
(4.27 m)
Non-vapor 3/4 in. 10 ft 10 ft
(.019 m) (3.05 m) (3.05 m)
Non-vapor 5/8 in. 14' 0" 14' 0"
(.016 m) (4.27 m) (4.27 m)

4.2 Filter / Strainer - Remote


The filter should be changed and the strainer topaz sharpen ai review - Activators Patch on a regular basis. A dirty filter and
strainer may cause the dispenser to deliver fuel slowly. In some cases, this may appear to
be a more serious service related problem, when simply changing the filter and cleaning the
strainer is all that is required.
Before removing the filter, trip the impact valve and turn OFF the circuit breaker for the asso-
ciated submersible pump.

WM048521 Rev 07 - PRELIMINARY 11/2014 31


4 Operator Maintenance

The fuel filter is removed the same way an oil filter is removed from a car engine. As shown
below, the new fuel funnel catches any fuel that is spilled and will properly drain it into a
container. Place a container under the funnel spout when changing the filter.
To install the new filter, first apply a film of oil to the gasket and hand turn until the gasket
contacts the base. Then tighten one half turn. Open the emergency shear valve, turn the
submersible circuit breaker ON and check for leaks.
In new installations it may be necessary to change the filter frequently in the first few days
of operation in order to ensure proper operation.
The strainer is located inside the casting and held in place by the filter. Place a suitable
container below filter/strainer casting to catch product and sediment. Remove the filter and
gently pull the strainer out of the filter/strainer casting. Clean strainer screen of any debris.
Reinstall strainer and a new filter.
If the underground installation is new, it may be necessary to clean the strainer screen two
or three times the first few days of operation to remove debris and pipe dope. After this, oc-
casional cleaning of the strainer is all that should be required. The fuel filter should be changed
whenever the strainer is cleaned.

WARNING!
Electric Shock Hazard!

Before removing the filter and strainer turn the


power to the dispenser and submersible pump(s)
off and close the emergency shut-off valves on the
dispenser being serviced. Failure to do so may
result in a hazardous condition that can result in
serious injury due to electric shock.

Figure 4.1: Remote filter

32 WM048521 Rev 07 - PRELIMINARY 11/2014


4 Operator Maintenance

4.3 Dispenser cleaning


Dispenser cleaning should be done frequently and in the manner outlined below. We can not
stress enough that regular care of the dispenser is the most important element of the cleaning
procedure. It prevents dirt and liquids from permeating the surface materials and forming
stains that can only be removed with more abrasive and aggressive cleaning methods.

Note!
Do not use pressurized water (even from a garden hose) to wash or rinse off a dispenser.
Under no circumstance should power washers be used to clean a dispenser. This can force
water into the electronic head and cause damage to the electronic components in the dis-
penser rendering it inoperative.
Do not use all-purpose cleaners.
Do not use gasoline or other petroleum-based products to clean the dispenser.
Use only mild cleaners such as regular manual dish washing detergents or soap! Wayne
takes no responsibility for damage on the product caused by aggressive cleaning detergents
not approved for cleaning use by Wayne.

Note!
It is important to wipe down the dispenser with a clean cloth and clear water after every
cleaning.

Note!
Periodic waxing of the dispenser surfaces is essential to maintain the original finish and in-
hibit corrosion. Stainless steel surfaces should be polished with a non-abrasive silicone wax.

Note!
No chlorine based cleaners can be used on the stainless steel.

4.4 Meter Maintenance


All dispenser meters are calibrated and sealed at the factory prior to shipment and delivery.

WM048521 Rev 07 - PRELIMINARY 11/2014 33


A Dissasembly - Recycling

Appendix A Dissasembly - Recycling

WARNING!

Disconnect mains power prior to any work, to pre-


vent damage which may result in electric shock or
fire.

WARNING!
Danger of tipping!

Please note that the centre of gravity is not in the


centre, and varies from one pump model to anoth-
er.

A.1 Empty the fuel out of the pump


It is important that there is no fuel in the pump before disassembly.
Blank the inlet pipes with a flange and gasket.
Between one and four pump units must be emptied and blanked, depending on the pump
model.
If necessary, ask a transport company for special regulations.

Part no. Name

Flange for blinding of the inlet pipe


WB000232-0004 Washer, BRB 8, 4X16 FZ (3p)
WB000228-0004 Nut, M6M M8 FZB (3p)
WM004482 Transport gasket for new inlet
WM004481 Flange blind for new inlet

A.2 Dispenser recycling


The dispenser must be recycled according to the applicable regulations in the country where
it is installed.

WM048521 Rev 07 - PRELIMINARY 11/2014 35


B Declaration of Conformance

Appendix B Declaration of Conformance

The 'X' suffix after the certificate number relates to the following special condition for safe
use:
1 When intended for use with ethanol blended fuels the user shall:
• ensure that the fuel shall not excess 90% ethanol with minimum water content;
• access the suitability of parts used in the construction of the fuel system for long term
suitability with such fuels with due regard to the use corrosion inhibitors;
• give due consideration to the correct selection of supplementary fittings (safe breaks,
etc.).
2 Where petrol fuel dispensers are shipped without nozzles, the equipment shall be fitted
with nozzles complying with EN13012 prior to being put into use.
3 Where petrol fuel dispensers are shipped without hoses, the equipment shall be fitted with
hoses complying with EN1360 or EN13483 prior to being put into use.

36 WM048521 Rev 07 - PRELIMINARY 11/2014


C Glossary of Terms and Acronyms

Appendix C Glossary of Terms and Acronyms

Table C.1:

TERM DEFINITION

additive a product added to the gasoline to enhance perfor-


mance
ALU aluminum
ambient the surrounding area or environment (as in ambi-
ent temperature)
Annunciator beeper, buzzer
ATC automatic temperature compensation
bezel the outer rim at the upper part of the dispenser
bleeding clearing the fuel lines of air (also, purging)
blender mixes two fuels together to obtain a third; a
valentina studio mac blending dispenser
blend ratios the amount or quantity of each of the two fuels
added together to obtain the third fuel
board a printed circuit board; one of the electronic boards
in the dispenser
bootstrap (as in computers, loading software)
breakaway device between the hose and dispenser that
breaks if the hose is accidentally pulled by the car
breakaway valve see emergency valve
C&PR valve Check and Pressure Relief Valve
CAT customer-activated terminal
circuit breaker a type electrical device
conduit enclosure used for routing electrical wires
coupling small section of pipe used to connect two pipes
together
C-syle the frame of a dispenser in the shape of the En-
glish letter C
current loop a communication circuit used by the dispenser
and POS system
double bump tube a tube having two raised areas on the ends

WM048521 Rev 07 - PRELIMINARY 11/2014 37


C Glossary of Terms and Acronyms

TERM DEFINITION

drip pan a catchement container (to catch liquids)


drip pan a pan used to drain or catch the fuel to keep it from
spilling onto the ground
EH electronic head
EHPM electronic head and payment terminal
electro-mechanical mechanical device controlled by electricity (as in
electro-mechanical totalizer)
emergency valve this valve is designed to close the fuel suupply line
if a vehicle crashes into the dispenser or if there
is fire in the dispenser; also known as shear valve,
crash valve and breakaway valve
EMT electro-mechanical totalizers
ESD electro-static discharge
filter device that captures small unwanted particles in
the gasoline or diesel fuel
fuel funnel used to drain fuel into a pan or container in order
to prevent spilling
fueling point identification a number assigned to a dispenser so that it can
address (FPID) be identified on a communications network
gross volume the amount or volume of fuel before temperature
compensation
Healy name of a vapor recovery system
high capacity dispenser is designed for a higher fuel flow rate
and therefore delivers a higher volume of fuel as
compared to a standard capacity dispenser
hose flexible tubing that connects the nozzle to the dis-
penser and where gasoline, petrol, or other product
flows through
H-style the frame of a dispenser in the shape of the En-
glish letter H
hybrid more than one source: (Wayne - Hybrid card
reader that reads both magnetic strip cards and
4K YouTube to MP3 3.3.8 Crack Portable Edition License Key Updated cards that contain a micro-chip that has the card
number
inlet location at a meter, valve, or casting where the
fuel enters

38 WM048521 Rev 07 - PRELIMINARY 11/2014


C Glossary of Terms and Acronyms

TERM DEFINITION

Intrinsic Safe Barrier (ISB) barrier inside the dispenser - the area below the
barrier is free from hazardous electrical sparks
island-oriented when the nozzle is located on the left or right sides
of the dispenser, as opposed to front or back sides
jitter unwanted electrical pulses or interference (as in
jitter pulses)
jumper small wire or connector used to join together to
pins in a connector or on a circuit board
junction box a metal box located near the bottom of the dis-
penser
lane oriented when the nozzle is located on the front or back
sides of the dispenser as opposed to th left or right
sides
LEE lower electronic enclosure
low hose the fuel hose is connected near the middle of the
dispenesr, as opposed to high at the top
LT low temperature
LTS lift-to-start (to activate dispenser)
meter dispenser component that measures the amount
of fuel dispensed.
net volume the amount or volume of fuel after temperature
compensation
nozzle device at the end of the hose that is inserted into
the vehicle (or container) when dispenseing prod-
uct
nozzle boot the holder (on the dispenser) of the nozzle when
it is not in use
outlet location at a meter, valve, or casting where the
fuel exits
outlet casting a metal or aluminum type mold where the hose is
connected to the dispenser
P/N part number
payment terminal (PT) as in payment terminal on the dispenser where a
payment is made by credit card
pedestal platform or base that the dispenser sits on (also
referred to as 'island' in some areas)

WM048521 Rev 07 - PRELIMINARY 11/2014 39


C Glossary of Terms and Acronyms

TERM DEFINITION

pipe dope sealant used on the threads of a pipe; pipe sealant


POS Point of Sale
prime to pour fuel into the pump to clear out the air in
order to start the pump properly
product tube fuel tube; the tube that contains the fuel or that
fuel moves through
PTS push-to-start (to activate dispenser)
pulser dirt 3 license key.txt download - Free Activators device that generates signals
purge clearing the fuel lines of air
relay an electrical component used in the dispenser
remote (pump) the pump for the dispenser is located in the under-
ground tank; not inside the dispenser
residual something left over or remaining (as in residue)
retainer clip (pin) used to secure or hold a tube in place
retractor pulls hose back into place after use
sales/volume display shows the total sale amount and the volume dis-
pensed
satellite (dispenser) a small dispenser connected to and controlled by
another dispenser that is referred to the master
servTerm a software application also known as the Service
Terminal program
shear valve see emergency valve
sight glass a glass cylinder used for visually measuring vol-
ume of fuel
Small-style a short (small) type of dispenser
softkey dirt 3 license key.txt download - Free Activators as in buttons or keys on a keypad
solenoid valve electro-mechanically operated valve
SPM secure payment module
stand-alone mode dispenser is not connected to or communicating
with the POS
Std standard
strainer device that captures small unwanted particles in
the gasoline or diesel fuel

40 dirt 3 license key.txt download - Free Activators WM048521 Rev 07 advanced systemcare ultimate full version - Activators Patch PRELIMINARY 11/2014


C Glossary of Terms and Acronyms

TERM DEFINITION

submersible pump that is located in the underground tank


suction (pump) the pump for the dispenser is located inside the
dispenser
torque rotating force applied to tighten; amount of force
used to tighten a screw or pipe
Torx™ a brand name of a type of screw
TOT totalizer -
totalizer (TOT) device on the dispenser that counts and displays
the total volume units
TRAC Transponder-activated CAT
triple bump tube a tube having three raised areas on the end
unit price display (UPD) shows the fuel price per gallon or per litre
universal joint a type of coupling
UPD Unit Price Display
UPS Un-interruptible Power Supply
vacuum air has been removed (as in a vacuum line)
valance cosmetic panels around the top of the dispenser
vapor recovery system that claims fuel vapors, minimizing expo-
sure to the customer and environment
WIP Wayne Intelligent Pulser; a type of meter manufac-
tured by Wayne
Xflo a type of meter manufactured by Wayne

WM048521 Rev 07 - PRELIMINARY 11/2014 41


Warranty
Any alternations or, additions to, or unauthorized work performed on the equipment without
manufacturer’s express written consent shall void any existing product warranty. Please see
product warranty information for additional details.
Use only genuine parts.

Copyright notice
© 2014 Wayne Fueling Systems
The contents of this manual may not be copied in whole or in part without the express written
consent of Wayne Fueling Systems.
Wayne Fueling Systems reserves the right to make revisions to this manual without prior
notice.

WM048521 Rev 07 - PRELIMINARY 11/2014


Headquarters Wayne Sweden Wayne China Wayne Brazil
Wayne Wayne Dresser Wayne Fuel Dresser Industria e
Dresser, Inc. Hanögatan 10 Equipment Comercio Ltda.
3814 Jarrett Way Box 50559 (Shanghai) Co., Ltd. Estrada do Timbo
Austin, TX 78728 SE-202 15 Malmö 1221 Dong Lu Road 126-Bonsucesso
USA Sweden Pudong, Shanghai Rio de Janeiro, Brasil
China

© 2014 Wayne Fueling Systems WM048521 Rev 07 - PRELIMINARY 11/2014

Источник: https://www.scribd.com/document/540958110/Wm048521-Helix-6000-Iec-Def

Dirt 3 Full KEY GENERATOR Image


A 'Complete Edition' of the game was announced by Codemasters on 9 February 2012,[14] with a trailer released on YouTube on 8 March 2012.[15] Consisting of the game and its associated DLC packaged together, the Complete Edition adds several tracks and vehicles. Serial Key Dirt 3 (stylised DiRT 3) is a rallying video game and the third in the Dirt series of the Colin McRae Rally series, developed and published by Codemasters.

Full However, the "Colin McRae" tag has been completely removed from this iteration (having previously been removed from only American versions of previous games in the series). Crack In September 2011, there were reports that a network security problem on the website of an AMD promo had resulted in the loss of 3 million Dirt 3 keys to the public for use via the Steam platform that have then been posted in various places around the internet. Key Generator Winning these events gives the player prize money, which can be spent buying new cars or upgrading existing ones, and unlocks further races. Patch The game was released in Europe and North America on 24 May 2011, and two days later in Australia for Microsoft Windows, PlayStation 3 and Xbox 360.

Gameplay modes can be classified as Racing, Demolition, Hoonigan or Party. It was released Friday 9 March in Europe, and 20 March in North America. The Japanese version of Dirt 3 was released on 25 August 2011. The player is entered in a series of "Tour" events, offering a range of races and tournaments to compete in. Dirt: Showdown removes several of the gameplay modes featured in its predecessor Dirt 3, and introduces new ones. Upon the successful completion of the series final, the next difficulty setting is unlocked, featuring faster opponents and longer races.

Download ButtonDownload Button


free download download serial key download with serial key "serial key generator download" "serial key direct download" "serial number keygen pc" "license key" "serial number" osx health cheat "crack free download for windows 7" Dirt 3 Full KEY GENERATOR "download with serial key generator" cracker tool "serial number key generator free download" 64bit x64 file crack and patch crack file free download 2013 "full download" serial key download "license key rar" latest. "demo finder "license key download" crack patch exe"

Источник: http://freegamecrackserialkey.blogspot.com/2014/04/dirt-3-full-key-generator.html

Windows 7 Professional product key is currently the excellent and general model of Windows for the laptop device. It gives customers the easy interface to make use of and perform its software program. Many people use unregistered version of Windows 7 at the Windows Computer. But while the use of Windows 7 Professional Product Key without activation, an individual might also use that Windows for the reasonable time. It’s been valued and appreciated with the aid of an outstanding variety of peoples everywhere in the world. This operating machine could be very well ideal for activation of your non-public computer at all. It is now accessible working device fortunately made available from Microsoft. There is no hesitation Microsoft is one of the leading institutions at the globe. It offers the satisfactory services by supplying the up to date model of OS on an everyday basis. It receives a great deal safety software for everybody.

Windows 7 Professional Product Key is pinned up as one of the OS this is suitable for the sector which became released by using Microsoft. Microsoft produced Windows 7, 3 years after Vista. It’s comfortable, clean and operating that is amazingly stylish handing over an entire lot of new capabilities which are visible. Windows 7 crack has six versions, come to be suitable. But maximum user’s best desire to choose from variations.

Windows 7 Product Key information and lightweight software where it verifies the product information based entirely on the important thing moved into through customers. kmspico may be applied to activate the same release, however, now not for the unique version of Windows 7. You should set off the product’s key on both 32 and 64 bit of Windows Operating-System. To make clear your whole worries through this newsletter, you could have the proper facts about the products key activation in your reputable Windows operating device.

If you’re the university student, we exceedingly pick out never to shop for any product key because such product secrets are very costly and Microsoft Windows 7 product keys are highly-priced in place of cheap for students. But if you agree with you’re able the genuine Windows 7 product key then make sure that you reach the proper destination to accumulate the Windows 7 Professional Product Key.

Features:

  • Easily report it shows to view for later use.
  • No person can look at, pause or rewind Television suggests.
  • The purchaser can create a mobile network.
  • Find almost whatever on your computer, immediately.
  • Takes a frustration out of writing information and printers at the community.
  • It’s the premium version of Windows 7 directed at you free of charge.
  • Obtainable in each 32-bit and 64-bit.
  • No dependence on the high requirement of installing Windows 7 Free of the cost.
  • Mixes cool photos with useful ways to govern your computing device.
  • The First form of defense towards adware and spyware and unwanted software program.
  • Quick sleep, continue & USB Ableton Live 10.0.4 (64-bit) Full Download - Free Activators analysis, fewer recollection wishes.
  • Keep intruders (hackers or harmful software program) from getting again in.
  • Redecorate your laptop with amusing new topics or user devices.
  • Anon the spot way to resize and compare Windows in your computing device.
  • Better thumbnail previews & icons, and plenty more ways to personalize.

System Requirements:

If you desire to run Windows 7 to your laptop or PC, here’s what it calls for:

  • CPU: 1 GHz or faster
  • RAM: 1 GB
  • Hard disk Space: 14 GB available

Windows 7 Professional Product Key

VQB3X-Q3KP8-WJ2H8-R6B6D-7QJB7

2QDBX-9T8HR-2QWT6-HCQXJ-9YQTR

38JTJ-VBPFW-XFQDR-PJ794-8447M

V3Y2W-CMF9W-PGT9C-777KD-32W74

7JQWQ-K6KWQ-BJD6C-K3YVH-DVQJG

3743C-T6892-B4PHM-JHFKY-4BB7W

8YDX9-B7MMG-82XD9-V88G9-MR92T

4FG99-BC3HD-73CQT-WMF7J-3Q6C9

38GRR-KMG3D-BTP99-TC9G4-BBDJJ

27GBM-Y4QQC-JKHXW-D9W83-FJQo

4G3GR-J6JDJ-D96PV-T9B9D-M8X2Q

TD77M-HH38J-FBCB8-8QX7Y-P2QH3

VQB3X-Q3KP8-WJ2H8-R6B6D-7QJB7

Steps to Activate Windows 7 Professional Product Key:

  1. First download the setup by clicking the download button.
  2. Draw out the archive with WinRAR.
  3. Then install the Windows 7 Professional as administrator.
  4. Copy and paste the Windows 7 Professional Product Key when it asks to register or activate Windows.
  5. It’ll be genuinely activated.
  6. You should use all high-quality capabilities.
  7. Enjoy its all elements for a lifetime.

some latest product key lists of windows 7

windows 7 product keyYC7DK-G2NP3-2QQC3-J6H88-GVGXT
windows 7 ultimate product keyKBKQT-2NMXY-JJWGP-M62JB-92CD4
product key for windows 7FN8TT-7WMH6-2D4X9-M337T-2342K
windows 7 professional product key6NTH3-CW976-3G3Y2-JK3TX-8QHTT
windows 7 ultimate product key freeC2FG9-N6J68-H8BTJ-BW3QX-RM3B3
windows 7 ultimate product key generatorJ484Y-4NKBF-W2HMG-DBMJC-PGWR7

windows 7 ultimate product key generator

Источник: https://windows7activators.com/windows-7-professional-product-key-for-free/

license key

Model 2 (designed as [PROTOTYPE2]) is an action and adventure video game open for 2012. Developed by Canadian studio Radical Entertainment and published by Activision, it is a sequel to the 2009 model. The game was announced at the 2010 Spike VGA Awards. The PlayStation 4 and Xbox One editions were released on July 14, 2015, along with the prototype Biohazard Bundle. Separate versions of the games became available in August 2015.
Thigh strength exercises – Movement to strengthen the thighs proscalpin weight room in périgueux, fire station – (dordogne).
The game includes the new protagonist, James Heller, as he seeks to destroy the Blacklight virus. The story is a vendetta story, where Heller wants to kill Alex Mercer, the protagonist of the prototype after his family was killed in the outbreak of the BlackBerry virus. While the game has been one of the biggest sellers for a while, its sales will eventually reduce the size of its developer.
The second model received “generally favorable reviews” on all platforms except the Xbox 360 edition, which received “average” reviews, according to the Metacritic Collection Review site. PlanetXbox360 described the game as “a superb sequel beyond the original”.   At the time of his departure, creator Dan Harmon considered the second model a great game.

Prototype 2 License Key Cd

To the roof lip and then move with a click from the right operator to the sliding will take you to the next surface. ” Mania awarded the game a score out Ten, calling it “a decent game. Dirt 3 license key.txt download - Free Activators less frustrating than the first, with more customization options, better abilities and more things to do. Lack of Barry Baby P. It is worth a look if you like the first game, or if you love games The Guardian gave the Xbox 360 a similar score to four out of five stars and stated “very purity of the target” which makes the game like a kill box for beautiful games that makes it uninvolved on any level that does not fall and is scattered by stray members.

So, while the Prototype 2 destruction simulator scores extremely high, there is a chance, like small children in the dirt, you’ll get bored after a short while and wander.  Digital Fix gave the same version of the console as seven out of ten, and said, “It’s not the AAA address he wants to be, but this said he is far from bargaining for feed, falling somewhere just above the middle.” “Out of three and a half stars out of five, she called it“ an action-packed adventure with fun fighting, but you get a little high here and there. ”[36] Digital Spy gave three stars out of five and said it“ excels as a field killed in an open world, where you can attract anyone who leaves in bloody and courageous waterfalls. Underneath, it is a normal action game characterized by mundane tasks that are not a real challenge, wrapped in a story that lacks substance and originality.

But those players who can stop their minds and just enjoy the ride will call of duty 4 - Free Activators the Prototype 2 flavor of blood-filled action a rather guilty pleasure. [35] Similarly, Metro UK gave a score of six out of ten and said, “Small doses Prototype 2 is quite a fun game, but in the end, because Heller and Mercer don’t care about anyone else you can never care about.”

Prototype 2 License Key Cd

Model 2 (designed as [PROTOTYPE2]) is an open, global action game published by Activision and developed by Radical Entertainment. Prototype 2 is a direct sequel to Prototype and was announced at the 2010 Spike Video Games Awards.

Prototype 2 events take place in New York City, now known as New York Zero (NYZ), after Sgt. James Heller in his quest to destroy Alex Mercer, having lost everything and everyone loved the Blacklight virus.

Prototype 2 License Key Cd

Fourteen months after Blacklight was rescued as Alex Mercer, he saved the injured New York in his quest for redemption, Sergeant. James Heller returns to the city, once his home, after being sacked from the Middle East war. He discovers that his wife and daughter have been killed, forcing him into a cycle of sadness and anger. He goes out on a suicide mission in the heart of the Red Zone to die at work and take as many atrocities as possible with him.

In one of these missions to the Red Zone Heller team, he was killed and confronted by Alex Mercer. A battle ensued between the two, which led Heller to Mercer several times to be dumped. Like his actions, Mercer Heller infects his Blacklight severity because he believes he is the perfect lieutenant in spreading the virus beyond Manhattan.  Heller wakes up at a research facility in Gentek and can escape. He faces Mercer, who managed to convince Heller that he was not responsible for the outbreak. Blackwatch and Gentek were using New York to test biological weapons. Mercer claims that he will not be able to take down the two factions without help.

Main features

  • Always back up files that are overwritten by the File Archive, as the original files are usually required to update the game to a newer version or to play online!
  • Some CD-ROM / hard EXE files run in Single Player mode but are discovered to be modified when you try to play online. When this happens, use the original EXE to play online, otherwise, you may find yourself banned for the game!
  • When using Static Files, be sure to use a Firewall that controls outbound traffic, because some games connect again to report the use of these modified files!
  • Some native games do not work when you install a specific application, such as DAEMON Tools. In most cases, using a hard CD or EXE fixes this problem!

System Requirements

  • Intel Core 2 Duo 2.2 GHz / AMD Athlon 64 x 2.0 GHz
  • Graphics 64 MB VRAM – NVIDIA
  • GeForce 6800 / ATI Radeon X1300Memory2
  • GB RAM12 GB Disk Space HDSystemWindows XP

How to crack:

  • 1. First download and open Key Generator.
  • 2. Click “Create CD Key” and wait a few seconds.
  • 3. Now copy the key.
  • 4. When the game activation window appears, just enter this key.
  • 5. Follow the on-screen instructions to complete the process.
  • 6. Have fun

Serial Keys

  • H7645YH-737824Y-HJ823Y8
  • HU23T8I-O839J9U-G7823YH
  • HIG378Y7-JKY237-O823Y89H
Источник: https://licensekey.co/games/prototype-cd/

Keygen DIRT 5 Serial Number — Key (Crack)

05.11.2020 Posted in Game Keygen and Crack

DIRT-5-Serial-Key-Generator

 

 

 

 

 

DIRT 5 is the boldest off-road racing experience. Blaze a trail on routes across the world, covering gravel, ice, snow and sand, with a roster of cars ranging from rally icons to trucks, to GT heroes. With a star-studded Career, four-player split-screen, innovative online modes, livery editor and more new features, DIRT 5 is the next generation of extreme racing.
● Take a trip around the world to and race on over 70+ unique routes across 10 different global locations in stunning, dynamic environments.
● Get behind the wheel of an eclectic and exciting roster of cars. Conquer the toughest of terrain with boulder-beating machines, take iconic rally cars to new locations, or feel the power of 900bhp dirt 3 license key.txt download - Free Activators cars.
● Earn sponsorships and unique rewards, conquer all locations, and take on a fierce rival in our biggest ever Career.
● Capture your biggest jumps and best moves with a detailed Photo Mode, and show your creative flair with DIRT’s deepest-ever livery editor for all cars.

DIRT-5-full-game-cracked

Keygen DIRT 5 Download

DIRT-5-Keygen-Serial-Key-GeneratorDIRT-5-PC  DIRT-5-Xbox-One  DIRT-5-PS4

DIRT-5-PlayStation-5  DIRT-5-Xbox-Series-X

  • Keygen (key generator) is a program that creates unique, working product keys for games, software programs, operating systems.Keygen would no doubt save you lots of money, especially if you’ve already paid for the program or game but lost the installation code. So grab it and enjoy!

DIRT-5-activation-gameDIRT 5 full game + Crack

OS: 64bit Versions of Windows®

DIRT-5-Download-torrent-crack

 

DIRT-5-Product-activation-keysDIRT-5-Download-PC

DIRT-5-activation-keys-and-full-game

Download Keygen
• Save the file in your computer and open it
• Generate your key
• Enter this code for game activation
100 % undetected
• Play in DIRT 5
(instructions + steps inside)
Enjoy the game

DIRT-5-codes-free-activation


tags:  cheats DIRT 5, DIRT 5, DIRT 5 2020, DIRT 5 Activation, DIRT 5 Activation Keys, DIRT 5 cd key, DIRT 5 CD Keys, DIRT 5 Code, DIRT 5 Crack, DIRT 5 Crack download, DIRT 5 Crack Free, DIRT 5 download, DIRT 5 First Crack, DIRT 5 Free activation keys, DIRT 5 Full game, DIRT 5 Full game Free Download, DIRT 5 Full Game Torrent Download, DIRT 5 Full version download, DIRT 5 Game Installer, DIRT 5 Game Torrent, DIRT 5 key, DIRT 5 Key Generator, DIRT 5 Key Generator For PC, DIRT 5 Keygen, DIRT 5 Keygen download, DIRT 5 Keygen For Generation Serial Keys, DIRT 5 NoCD Crack, DIRT 5 NoDVD Crack, DIRT 5 Origin Keys, DIRT 5 Patch Nocd, DIRT 5 Product Key, DIRT 5 Product Keys, DIRT 5 repack download, DIRT 5 serial, DIRT 5 Serial Code, DIRT 5 Serial Key download, DIRT 5 Serial Keys, DIRT 5 Serial Number free download, DIRT 5 Skidrow, DIRT 5 System Requirements, DIRT 5 Working, Download DIRT 5 For Free, download DIRT 5 full version pc game, Free DIRT 5, How To Download DIRT 5, How to get DIRT 5

Источник: https://games-blacksoft.com/keygen-dirt-5-serial-number-key-crack/

Dirt 3 license key.txt download - Free Activators -

Many old PC games seem to work fine on Windows 10, but games using Microsoft’s failed Games for Windows LIVE (GFWL) platform are an exception. They’ll give you an error on Windows 10. You can remove GFWL from many games entirely, though, or just troubleshoot it and make it work properly.

Many games have abandoned GFWL, allowing you to redeem a non-GFWL copy or install a patch that removes GFWL. But not all of them have. For example, Rockstar’s Grand Theft Auto IV and Grand Theft Auto: Episodes from Liberty City still use GFWL, as does Bethesda’s Fallout 3. These games are regularly promoted on Steam sales, so gamers will be stumbling onto GFWL for years to come.

Get a Non-GFWL Copy of the Game

RELATED:Why PC Gamers Hated Microsoft's "Games for Windows LIVE"

Many games have migrated away from Microsoft’s PC gaming platform to Steam. If you purchased the game in the past–whether you bought a physical retail copy, digital download, or even a copy from Microsoft’s Games for Windows Marketplace–you can often convert that old GFWL-tainted copy to a modern one that will work properly.

The following games allow you to redeem them on Steam if you have a retail key or one provided by GFWL itself. These are big-name, big-budget games, and that’s no accident. Publishers and developers haven’t bothered removing GFWL from many older games that didn’t do so well.

  • Batman: Arkham Asylum
  • Batman: Arkham City
  • Bioshock 2
  • Dark Souls: Prepare to Die Edition
  • Dead Rising 2
  • Dead Rising 2: Off the Record
  • DiRT 3
  • Resident Evil 5
  • Super Street Fighter IV: Arcade Edition

If you have a code for one of these games, you can redeem it on Steam. Install Steam and launch it. Click the “Games” menu, select “Activate a Product On Steam,” and enter the game’s product key to redeem it on Steam. The version Steam installs will be the latest one without GFWL.

Crack GFWL Out of the Game

Some of the bigger, more popular games have third-party tools that can effectively crack Games for Windows LIVE out of the game. These tools aren’t intended for piracy or cheating in multiplayer–in fact, they disable access to multiplayer if a game does contain multiplayer. They’re just intended for removing the hassle of GFWL. Such modifications aren’t available for every game–just particularly popular ones.

  • Fallout 3: The Games for Windows Live Disabler from Nexus Mods will disable GFWL. FOSE, the Fallout Script Extender modding tool, also disables GFWL.
  • Grand Theft Auto IV: The XLiveLess modification will remove GFWL from the game and ensure save games function properly. It also disables access to multiplayer features.
  • Grand Theft Auto: Episodes from Liberty City: XLiveLess functions for Episodes from Liberty City, too.
  • Halo 2: XLiveLess for Halo 2 promises to remove GFWL from from Microsoft’s second Halo game, which Microsoft no longer supports or even sells.
  • Red Faction: Guerilla: XLiveLess will also remove GFWL from the original version of this game. The latest versions of this game available on Steam no longer have GFWL, but old product keys for this game can’t be activated on Steam.

You may need a file extraction program like 7-Zip to extract these downloads. Follow the instructions in the download’s readme file to learn how to install whichever modification you downloaded and ensure it works properly.

Update Your GFWL Client Software

If you’re stuck playing a game that requires GFWL on modern versions of Windows and no alternative versions or cracks are available to help you disable them–or if you’d just like to use GFWL anyway–you can make GFWL function. Despite Windows 10’s assertion that Games for Windows LIVE isn’t compatible with modern versions of Windows, it can work.

The problem is that games that require GFWL include their own GFWL installers. When you install one of these games on a modern version of Windows, it installs an old version of GFWL that won’t function properly. Rather than attempting to update itself, GFWL will just fail to work properly without giving you any indication of what’s wrong and games won’t even launch or provide an error message.

To fix this problem, download the latest version of Games for Windows LIVE from Microsoft’s website and install it. After you install the latest version, GFWL-enabled games should launch and function. They may not work perfectly, of course. For example, we had to use the keyboard to navigate the GFWL interface in one particular game on Windows 10, as the mouse didn’t work properly. The “Tab” and “Enter” keys were essential for navigating the interface.

Create a Local Profile

You can avoid online-connectivity and syncing problems that can interfere with your gameplay by creating a local profile (in other words, an offline profile) rather than an online profile in GFWL. This will work for most games, although you’ll have to create an online profile if you want to use multiplayer features. This will also allow you to play GFWL-enabled games if you’re outside one of the 42 supported countries where GFWL and Xbox services are available. You’ll know if you are, because GFWL will show you an error message.

To do this, open the GFWL interface by pressing the “Home” button on your keyboard while in any GFWL-enabled game and choose “Create New Profile.” Scroll down on the Create Gamer Profile screen, click “Create a Local Profile,” and enter the details you want to use.

You’ll lose any save files if you do this while playing a game. Those save files are associated with your online profile if you’re already using one of those, so you’ll have to switch back to the other profile to regain access to your saves. This is best done when setting up GFWL for the first time.

Fix Online Connectivity Problems

If you’re having issues connecting to other players in GFWL games, you may be in some trouble. Microsoft no longer actively maintains this stuff and there’s no guarantee you’ll have a good experience even if you can connect, so just bear that in mind. We’ve had a lot of problems.

However, you can make online connectivity work by messing with your firewall settings. Microsoft recommends three things:

  • Enable UPnP on your router. This allows GFWL to automatically forward the ports it requires to connect to other players. UPnP is a security concern, but you can always disable it when you’re done with the game.
  • Open the following ports for both inbound and outbound traffic, if you don’t want to enable UPnP. You’ll have to allow these ports in any advanced firewall software you’re running. However, for most people, you’ll just need to forward these ports on your router. We recommend just using UPnP, but here are the ports GFWL requires: TCP port 3074, UDP port 88, and UDP port 3074.
  • Allow the GFWL client through your firewall. If you’re using firewall software, ensure the GFWLClient.exe program found at C:\Program Files (x86)\Microsoft Games for Windows Live\Client is allowed to communicate with both inbound and outbound connections.

That’s a good place to start, and should solve most issues–at least most solvable ones. Microsoft also provides a long guide to troubleshooting GFWL connection problems. Consult the official guide if you need more help.


For more information, check the List of Games for Windows – LIVE games list on the PC Gaming Wiki website. It provides an exhaustive list of GFWL-enabled games and the state of their support.

If you’re experiencing other problems, the PC Gaming Wiki website also offers a good article on troubleshooting more obscure GFWL errors that may bite you.

Источник: https://www.howtogeek.com/245780/how-to-make-games-for-windows-live-games-playable-on-windows-10/

Dirt 3 Full KEY GENERATOR Image


A 'Complete Edition' of the game was announced by Codemasters on 9 February 2012,[14] with a trailer released on YouTube on 8 March 2012.[15] Consisting of the game and its associated DLC packaged together, the Complete Edition adds several tracks and vehicles. Serial Key Dirt 3 (stylised DiRT 3) is a rallying video game and the third in the Dirt series of the Colin McRae Rally series, developed and published by Codemasters.

Full However, the "Colin McRae" tag has been completely removed from this iteration (having previously been removed from only American versions of previous games in the series). Crack In September 2011, there were reports that a network security problem on the website of an AMD promo had resulted in the loss of 3 million Dirt 3 keys to the public for use via the Steam platform that have then been posted in various places around the internet. Key Generator Winning these events gives the player prize money, which can be spent buying new cars or upgrading existing ones, and unlocks further races. Patch The game was released in Europe and North America on 24 May 2011, and two days later in Australia for Microsoft Windows, PlayStation 3 and Xbox 360.

Gameplay modes can be classified as Racing, Demolition, Hoonigan or Party. It was released Friday 9 March in Europe, and 20 March in North America. The Japanese version of Dirt 3 was released on 25 August 2011. The player is entered in a series of "Tour" events, offering a range of races and tournaments to compete in. Dirt: Showdown removes several of the gameplay modes featured in its predecessor Dirt 3, and introduces new ones. Upon the successful completion of the series final, the next difficulty setting is unlocked, featuring faster opponents and longer races.

Download ButtonDownload Button


free download download serial key download with serial key "serial key generator download" "serial key direct download" "serial number keygen pc" "license key" "serial number" osx health cheat "crack free download for windows 7" Dirt 3 Full KEY GENERATOR "download with serial key generator" cracker tool "serial number key generator free download" 64bit x64 file crack and patch crack file free download 2013 "full download" serial key download "license key rar" latest. "demo finder "license key download" crack patch exe"

Источник: http://freegamecrackserialkey.blogspot.com/2014/04/dirt-3-full-key-generator.html

Buy DiRT Rally 2.0 CD Key Compare Prices

STEAM EMEA KEY : What is Steam Key EMEA signification? EMEA means for Europe, Middle East and Africa and several other countries. Please read the store description about country and language restrictions to know which are concerned. Use the key to Download and play DiRT Rally 2.0 on Steam.

EU STEAM CD KEY: Requires an EUROPEAN IP address or you must activate it with a VPN (Virtual Private Network) in order to play DiRT Rally 2.0. Might have languages restrictions or language packs. Read the description on the store game page to know if the EU IP is only needed for activation or for playing also (maybe on EU Servers). Most of the stores offer you their help, or show you how to do this with a tutorial to follow.

EUROPEAN STEAM GIFT : It’s a steam gift for Europe which requires an European IP address to activate and to play DiRT Rally 2.0 on Steam. Read carefully the store description about region and language restrictions.

STEAM GIFT : A Steam gift is a one-time transfer you receive. You activate and install DiRT Rally 2.0 to play on Steam, it is a non-refundable game that stays in your Steam games collection. Please read the store description about any language or region restrictions.

STEAM CD KEY : Use the Steam Key Code on Steam Platform to download and play DiRT Rally 2.0. You must login to your Steam Account or create one for free. Download the (Steam Client HERE). Then once you login, click Add a Game (located in the bottom Left corner) -> Activate a Product on Steam. There type in your CD Key and the game will be activated and added to your Steam account game library.

Windows 10 Global : This is an Worldwide Microsoft code to play on PC for Worldwide . You need to have installed Windows 10 Anniversary Edition update on your PC. Log into your Microsoft account to download and play. Read closely the description given by the store to activate your game.

Bundle

Bundle 1

Dayone Edition

Deluxe Edition

Game Of The Year Edition

Preorder bonus

Standard Edition

Super Deluxe Edition

Leave a comment

You must be logged in to post a comment.

Источник: https://www.allkeyshop.com/blog/buy-dirt-rally-2-0-cd-key-compare-prices/

DiRT 3 (Colin McRae) - Activation Key (GFWL CD-KEY)

>>>>> KEY IS NOT INTENDED to activate the system STEAM! <<<<<

What you buy:

You will instantly receive a license activation key (serial number, CD-KEY) system Games for Windows LIVE game DiRT 3 (or DiRT 3 Complete Edition).
_________________________

The activation key in the format XXXXX-XXXXX-XXXXX-XXXXX-XXXXX is displayed in the browser window immediately after the payment.

Activated game gives you full access to all the network functions of the game, including a multiplayer mode (Multiplayer).
Buy activation key and play with real players in one of the best racing simulators, received high ratings game media!

_________________________

REQUIREMENTS FOR ACTIVATION

Note: This switch is not suitable for game activation system Steam. It is designed to activate the service in the Games for Windows LIVE.
To activate the key must have installed the game DiRT 3 or DiRT 3 Complete Edition. The distribution of the game can be downloaded from the Internet (eg, torrent trackers) or set with the original game disc.
For full access to all the DLC in DiRT 3 Complete Edition, you must install the appropriate version of the game. Prepaid code that gives access to all the DLC DiRT 3 Complete Edition in this product is not included.
_________________________

Game Description

Continuation of the well-known racing series Colin McRae, has gained popularity thanks to simple but exciting gameplay.
In DiRT 3 (Colin McRae: DiRT 3) represented more machines areas, trails and events than in previous games. More than five dozen of the best rally cars, racing over the past fifty years; twice as many tracks as the project in 2009; ratings, awards and achievements - in DiRT 3 each can become a true professional virtual rally and make a brilliant career racer.
Conquer the toughest tracks in Finland, Monaco, Tokyo. Snow, rain, mud - be prepared for any surprises the weather, day and night!

Features DiRT 3:
• The grand fleet. The game features the famous rally cars the last few decades of the twentieth century, which will impress any fan of racing.
• Virtuosi steering. The new regime "Gymkhana" allow everyone to show their skills in specially equipped areas, performing all sorts of dizzying avtotryuki - Drift, ski jumping, "police reversals."
• And in the rain and snow. Racers can test themselves by taking part in competitions under difficult weather conditions and at night.
• Split Screen. In the first in the history of the series, players can compete in split screen mode.
• challenging tracks rally championships in Europe, Africa, the United States of America.
• Bundle YouTube account for the immediate publication of spectacular moments of the game.

\u003cdelivery\u003e The original copy of the key, the license agreement and all copies of the software in its original packaging, you can get a convenient way for you. To do this, after payment and receiving a digital copy of the key, please contact me via Skype or web messenger (button "Ask a question ..."). For residents of Moscow and the delivery can be carried out by courier. Postage and packing, as well as courier services are paid separately by you. \u003c/delivery\u003e

Источник: https://plati.ru/itm/DiRT+3+(Colin+McRae)+-+Activation+Key+(GFWL+CD-KEY)/1459315?lang=en-US

Wm048521 Helix 6000 Iec Def

Helix™
WM048521

Rev 07 - PRELIMINARY

AE
Read this manual before starting any installation, service, or maintenance work
Fuel dispensers contain both electrical components and a hazardous, flammable and poten-
tially explosive liquid. Failure to follow the below precautions and the Warning and Caution
instructions in this manual may result in serious injury. In addition, it is your responsibility to
follow all rules, codes, regulations, and laws that apply to your location and type of work being
performed.

Safety precautions
Make sure that ALL power to the dispenser is turned OFF before opening the cabinet or
starting work. Physically lock, restrict access to, and/or tag the circuit breakers you turn off.
In addition, be sure to trip (close) all emergency valves under the dispenser (if installed)
BEFORE you begin.
Make sure that you locate the facility’s emergency shut-off button, and know how to turn OFF
power to the dispenser and submersible pumps (if any) in an emergency.
Never allow a leaking pump to run! Use appropriate measures to clean up any fuel on the
forecourt, and ensure that any leaks or issues that could cause a leak are attended to and
repaired immediately.

Indicators and notations

Note!
Indicates extra information or tip.

NOTICE!

Highlights an essential element of a procedure to


help ensure accuracy, completeness, and appro-
priate performance.

CAUTION!

Indicates a potentially hazardous situation, which


if not avoided, could result in personal (non-lethal)
injury or equipment damage.

WM048521 Rev 07 - PRELIMINARY 11/2014


WARNING!

INDICATES A POTENTIALLY HAZARDOUS SIT-


UATION, WHICH, IF NOT AVOIDED COULD
RESULT IN DEATH OR SERIOUS INJURY.

DANGER!

INDICATES A HAZARDOUS SITUATION, WHICH,


IF NOT AVOIDED, WILL RESULT IN DEATH OR
SERIOUS INJURY.

WM048521 Rev 07 - PRELIMINARY 11/2014


Table of Contents

Table of Contents

1 Introduction ......................................................................................................... 3
1.1 Dispensers Covered ............................................................................... 3
1.1.1 Wayne iGEM™ Computer Software ................................................................. 5
1.1.2 Determining Dispenser Sides A & B ................................................................. 5
1.1.3 Parts of the Pump ............................................................................................. 6
1.1.4 Product Liability ................................................................................................. 7
1.1.5 Intended Use ..................................................................................................... 7
1.1.6 What is DEF? .................................................................................................... 8
2 Important Safety Items ........................................................................................ 9
2.1 Safety Items You Should Know ............................................................... 9
2.2 Classification Schemes ........................................................................... 9
2.3 Portable Tanks and Containers ............................................................... 12
2.4 Health Note ............................................................................................. 12
2.5 Safety Precautions - Operation and Maintenance .................................. 12
2.6.1 Health and Safety Regulations .......................................................................... 12
2.6.2 Health and Safety Regulations - DEF ............................................................... 13
2.7 Dispenser Safety Features ..................................................................... 14
3 Operation ............................................................................................................ 15
3.1 Introduction ............................................................................................. 15
3.2 How to Get Service On Your Dispenser .................................................. 15
3.3 Infrared Remote Control ......................................................................... 15
3.4 Basic Dispenser Requirements ............................................................... 16
3.5 Programming Functions .......................................................................... 16
3.6 Access to Functions ................................................................................ 17
3.7 Annunciator Operation Check ................................................................. 18
3.8 Set Clock Function (F 02) ....................................................................... 18
3.9 Exit Function (F00) .................................................................................. 19
3.10 Password Change (F33) ......................................................................... 20
3.11 Filling Modes (F01) ................................................................................. 21
3.12 Setting Unit Prices .................................................................................. 22
3.12.1 F03 - Set Side A Unit Prices ............................................................................. 22
3.12.2 F04 - Set Side B Unit Prices ............................................................................. 23
3.12.3 Changing the Unit Price (F03) ........................................................................... 23
3.13 Authorizing the Dispenser ....................................................................... 25
3.14 Disable Stand-alone Operation ............................................................... 25
3.15 Operating the Dispenser ......................................................................... 26
3.16 Initial Delivery .......................................................................................... 26
3.17 Restarting After Power Failure or Shutdown .......................................... 27
3.18 Cycling Power to Clear Faults ................................................................. 27
3.19 Error Codes ............................................................................................. 27
3.20 Resetting After All Stop ........................................................................... 28

WM048521 Rev 07 - PRELIMINARY 11/2014 1


Table of Contents

3.21 Electronic Totalizer Readings .................................................................. 29


3.21.1 Totalizer Volume Readings by Meter Position ................................................... 29
3.21.2 Electro-Mechanical Totalizer Operation ............................................................ 29
4 Operator Maintenance ........................................................................................ 31
4.1 Hose and Hose Retractor ....................................................................... 31
4.2 Filter / Strainer - Remote ......................................................................... 31
4.3 Dispenser cleaning ................................................................................. 33
4.4 Meter Maintenance ................................................................................. 33

Appendices
A Dissasembly - Recycling ..................................................................................... 35
A.1 Empty the fuel out of the pump ............................................................... 35
A.2 Dispenser recycling ................................................................................. 35
B Declaration of Conformance ............................................................................... 36
C Glossary of Terms and Acronyms ....................................................................... 37

2 WM048521 Rev 07 - PRELIMINARY 11/2014


1 Introduction

1 Introduction

This manual covers general user information on the operation and maintenance of the Wayne®
Helix™ fuel dispenser models outlined in Section 1.1 Dispensers Covered, on page 3.
Computer function settings that are necessary for Helix dispenser operation, such as unit
prices and fueling point ID’s, are also included in this manual. If additional information on
function settings and statistics is required, refer to the Helix Dispenser Service manual
(WM048523).
The following items are required for the operation and maintenance of Helix dispensers:
• Infrared remote control (IR remote or IRC) - Wayne part number (p/n) WM002290
• Printer door key - DHW1 key
• Lower bezel door and sliding bezel tray keys - DW2 key
• Hydraulic door key - Wayne p/n WU007681
Any questions concerning operation of the dispenser that are not covered in this manual
should be referred to your local service provider.

1.1 Dispensers Covered


This manual applies to the following style of Helix dispenser that has been approved by IEC:
• C-Style, Wayne Helix™ 6000 fuel dispenser
• Your dispenser activation is Auto ON
• Your dispenser has a DEF (Diesel Exhaust Fluid) pump
Refer to Figure 1.1 to determine model attributes defined in the model number of the dispenser.
The dispenser model number can be located on the dispenser name plate, receipts, or
shipping documentation and the scope of this manual applies only to the dispenser model
as specified therein.

WM048521 Rev 07 - PRELIMINARY 11/2014 3


1 Introduction

a STYLE e NO. GRADES OUT 1 - 8


C = C-style
If blender, count up +1 per each blending g NO. HOSES / NOZZLE POSITIONS PER SIDE
H = H-style 1 digit = Symmetric. Same number, solution, and
possibility between 2 grades
S = Small Style flows on both sides A & B.
2 digits = Asymmetric. Different number,
solutions, or flows on Sides A & B.
1st Digit = Side A
DESIGN 2nd Digit = Side B
b W = Wide
N = Narrow
H = High Hose
L = Low Hose
a b c de f g h NOTE: The last two positions shown here
X ( X /X ) X X - X X X can contain multiple digits

c ORIENTATION
ID = Island Dual Sided UI
IS = Island Single Sided UI
LM = Lane Mirrored
LU = Lane UnMirrored*

h BASIC TECHNICAL FEATURES


A = Additive
B = Biodiesel
NO. HYDRAULIC C = CNG (Compressed Natural Gas)
d NO. GRADES IN
f POSITIONS D = DEF (Diesel Exhaust Fluid)
1-5
0-5 E = Ethanol
F = Fleet
G = Enhanced Capacity
H = Super-High Capacity
J = Ultra-High Capacity
L = LPG (Liquified Petroleum Gas)
Example: M = Media
P = Payment
H(W/LU)23-21PR R = Remote
S = Suction
T = Terminal
U = 4 Users
*NOTE: The position prior to and
V = Vapor Recovery
following the slash '/' can contain two
W = Main (Back-to-Back)
(2) digits as shown in this example.
X = Back
The 'L' & 'U' specify 'Lane' &
Y = SAT Master (Satellite)
'UnMirrored'.
Z = SAT Slave (Satellite)

Figure 1.1: Helix Model Designation

4 WM048521 Rev 07 - PRELIMINARY 11/2014


1 Introduction

1.1.1 Wayne iGEM™ Computer Software


Helix model dispensers are delivered pre-installed with iGEM computer software, version 62
or later which can also be downloaded via laptop computer by a Wayne certified Service
Technician. ServTerm version 6.1.5 or later is required for servicing (loading the computer
software or dispenser configuration template), however, this is not required for installation
or startup of the dispenser.

1.1.2 Determining Dispenser Sides A & B


Locate the Wayne name plate on the outside of the dispenser. If, while facing the dispenser,
the name plate is on your right side, you are facing side A of the dispenser. If the name plate
is on the left side, you are facing side B of the dispenser.

WM048521 Rev 07 - PRELIMINARY 11/2014 5


1 Introduction

1.1.3 Parts of the Pump

electronic head

nozzle boot

nozzle

hose
hydraulic door lock

hydraulic module cabinet

base frame

Example shown is an Helix 6000 DEF fuel dispenser


Figure 1.2: Dispenser

6 WM048521 Rev 07 - PRELIMINARY 11/2014


1 Introduction

sales / volume / price display

VGA display

softkeys

printer door lock

keypad
card reader

Example shown is an Helix 6000 - DEF fuel dispenser


Figure 1.3: Dispenser Bezel

1.1.4 Product Liability


Wayne declines all responsibility for product liability if any modifications, additions, etc., have
been made to the equipment without the written consent of Wayne.

1.1.5 Intended Use


The pump is designed and approved for measuring and movement of a Diesel Exhaust Fluid
(DEF) in correct quantities, from tank to vehicle.

WM048521 Rev 07 - PRELIMINARY 11/2014 7


1 Introduction

1.1.6 What is DEF?


Diesel Exhaust Fluid (DEF), also referred to as AdBlue® in Europe, is a very aggressive
chemical fluid made of an aqueous urea solution of 32.5%, however, it is not flammable. It
is used for injection to the exhaust system of a vehicle to improve the catalytic process. Be-
cause of this, it is extremely sensitive to contamination from other fluids, metals, dust, dirt,
etc. The only approved testing liquid during production is distilled water that does not contam-
inate the urea product. There is always distilled water remaining in valves and other fragile
parts and as distilled water has a freezing point of around 0 degrees Celcius it means that
DEF equipment has to be kept above freezing point during all phases of transportation, de-
livery, installation, and operation.
AdBlue® is a registered trademark of Verband der Automobilindustrie e.V.

8 WM048521 Rev 07 - PRELIMINARY 11/2014


2 Important Safety Items

2 Important Safety Items

2.1 Safety Items You Should Know


• Know how to turn OFF power to the dispenser in an emergency.
• Know how to turn OFF power to submersible pumps in an emergency.
• Regularly inspect all external fuel carrying components such as hoses, nozzles, break-
aways, etc. for damage or leaks.
• Regularly inspect dispenser housing parts for damage or leaks.
• Have all leaks or defects repaired immediately.
• Test the Emergency (Shear) Valve by opening and closing several times at least once
per year.
• Use of automatic safety nozzles prevents overfilling fuel tanks and avoids spilling fuel.
• Avoid tipping the nozzle downward and spilling excess fuel.
• Sufficient lighting must be provided to allow safe use of the dispensers.
• A clearly visible and identifiable station Emergency Stop Switch must be provided at the
station to shut OFF power to all station dispensers and submersible pumps in case of an
emergency.
• Portable tanks (containers) of 12 gallons (45 liters) or less shall not be filled while they
are in or on a motor vehicle. See Warning information about this subject in the following
section.
• Hose retractor mechanisms are spring loaded and can pose a possible injury.
• Stow hoses to prevent tripping and falling.
• Care should be taken to prevent fuel spillage. If spillage occurs, clean up immediately.
• Know the Hazardous Zone area around the dispenser.

2.2 Classification Schemes


Zones Risk Types Protection Class Example

0 A risk area where explosive gas mix- Exia In a tank


ture exists all of the time or during a
long period.
1 A risk area where explosive gas mix- Exd, Exe, Exib, Within the meter
ture may occasionally exist during nor- Exp, Exia, Exs (within the hy-
mal operation. draulic areas and
column of the
pump)

WM048521 Rev 07 - PRELIMINARY 11/2014 9


2 Important Safety Items

Zones Risk Types Protection Class Example

2 A risk area where explosive gas mix- Exd, Exe, Exib,


ture is not expected to exist during Exp, Exia, Exs,
normal operation and, if it does exist Exo, Exq
anyway, it will be infrequent and for a
short period of time.

10 WM048521 Rev 07 - PRELIMINARY 11/2014


2 Important Safety Items

WM048521 Rev 07 - PRELIMINARY 11/2014 11


2 Important Safety Items

INSERT CLASSIFICATION SCHEME HERE

2.3 Portable Tanks and Containers


Portable containers of 12 gallons (45 liters) or less shall not be filled while they are in or on
a motor vehicle. Filling portable containers, especially when they are sitting on a non-conduc-
tive surface such as a floor mat or a plastic bedliner in the back of a pick-up truck, can present
a possible safety hazard and should be avoided as so stated in the following WARNING:

WARNING!
FIRE HAZARD!

The flow of gasoline through the dispenser nozzle


can produce static electricity which can cause a
fire if gasoline is pumped into an ungrounded
gasoline container. To avoid static buildup and the
possible resulting serious injury:
• Place approved container on the ground. Do
not fill the container in the vehicle or truck bed.
• Keep the nozzle in contact with the can or con-
tainer while filling. Do not use an automatic
pump handle (latch-open) device.

2.4 Health Note

WARNING!
Toxic Substances!

Be advised that contact with petroleum fuel and


inhalation of fuel vapors can cause serious damage
to your health.

2.5 Safety Precautions - Operation and Maintenance


• Only persons knowledgeable in performing the required maintenance shall perform the
work.
• All electrical power to the dispensing device and pump servicing the dispenser shall be
shut off at the main electrical disconnect panel.
• All vehicle traffic and unauthorized persons shall be prevented from coming within 20 feet
(6 meters) of the dispensing device.

2.6.1 Health and Safety Regulations


It is important that the following rules and regulations are followed when flammable liquids
are used:

12 WM048521 Rev 07 - PRELIMINARY 11/2014


2 Important Safety Items

• It is prohibited to smoke and light fire or bring open flame close to the pump.
• Stop the engine while refuelling.
• The distribution box must be easily accessible and access must not be blocked by goods
etc.
• Always ask a specialist to make electrical installations of any kind. Special regulations are
applicable!
• Please watch for any leakage from pumps. If there is a leakage, cut all power to the pump
and call Wayne After Sales Service.
• Always comply with the regulations regarding handling of petrol and oil, published by each
oil company.
• Always comply with public authority requirements related to the vapor recovery system.
• Make sure that a suitable fire extinguisher is in place and is easily accessible.
• To avoid malfunction or damage to the pump, make sure that there is enough fuel in each
tank.
• Adequate personal safety equipment should be used during maintenance of the equipment
(gloves, breathing mask, glasses etc.).

2.6.2 Health and Safety Regulations - DEF


It is important that the following rules and regulations are followed:
• The dispenser must be placed outside hazardous areas.
• The distribution box must be easily-accessible and may not be blocked by goods or other
items.
• Always let specialists make electrical installations of all kinds. Special regulations apply!
• Please pay attention to any leakage from the dispenser. If there is a leak, cut the power
to the pump and call Wayne After Sales Service at ( PHONE NUMBER HERE).
• Always follow all regulations regarding handling of Urea published by each distributor or
supplier.
• The customer must ensure that DEF does not come in contact with the skin or eyes while
re-filling. It is the responsiblity of the station owner to post applicable warning and caution
statements and/or stickers in a place on the dispenser that is visible to the customer.
• To avoid incorrect function or damage to the pump, ensure that there is enough Urea liquid
in the front.
• Adequate personal safety equipment should be used during maintenance of the equipment
(gloves, safety glasses, etc.)

Note!
To prevent damage in the hydraulic cabinet dispenser doors should be in place during rainy
and/or icy weather conditions. Also, check the nozzle boot flipper (if present) for freedom of
movement. If ice or snow has formed on the flipper, it should be cleared to prevent unecessary
damage.

WM048521 Rev 07 - PRELIMINARY 11/2014 13


2 Important Safety Items

2.7 Dispenser Safety Features


Helix dispensers come equipped with certain features that increase the safety of those persons
who come in contact with the dispenser, including customers, store employees and mainte-
nance technicians. Inclusion of these features depend upon the installation location and ap-
plicable laws and regulations.
• Emergency Shut-off (Shear) Valves - (optional)
An emergency valve is designed to close the product line in case of shock or fire. The
shear valve functions if the dispenser is knocked out of position.
• Hose Retractor
Helix dispensers are equipped with a hose retractor that will break away from the dispenser
in the event that a customer drives off while the hose is still attached to the vehicle.

Note!
On dispensers equipped with the Hose Retractor option, the hose clamp must be mounted
upstream of the breakaway device to avoid damage to the dispenser in the event of a
drive-off.

The combined hose, breakaway, and whip maximum lengths are listed in the table below.

Crossover Type Loopback Type Loopback Type


1 Hose per Side 1 Hose per Side 2 Hoses per Side

14' 0" (4.27m)


Non-Vapor 3/4” (19.050 10’ 0’’ (3.05 m) 10’ 0’’ (3.05 m)
mm)
Non-Vapor 5/8” (15.875 14’ 0’’ (4.27 m) 14’ 0’’ (4.27 m)
mm)

• Break-away Hose (optional)


Some Helix dispensers are equipped with a hose that will break away from the dispenser
in the event that a customer drives off while the hose is still attached to the vehicle. AL-
WAYS contact an authorized service provider after a breakaway accident. The following
parts must always be changed: Breakaway Valve (WM002174).

14 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

3 Operation

3.1 Introduction
You will need to access the maintenance mode in order to program functions and/or view
statistics. The function and statistics data appear in the money, volume, and unit price display
windows. The infrared interface is similar to a television remote control. It has 16 buttons and
is used to access dispenser functions. This interface uses only the pump display for user
feedback. There is no additional display. Refer to Section 3.3 Infrared Remote Control, on
page 15.

3.2 How to Get Service On Your Dispenser


Trouble with the operation of the dispenser should be referred to your local Wayne authorized
service personnel or call the your local service provider.

Note!
Any modification, repair, or service to the dispenser not in accordance with the original design
may invalidate compliance with the equipment certifications such as CE Marking, UL-listing,
etc. Consult manufacturer as necessary.

3.3 Infrared Remote Control


The Infrared Remote Control (IRC or IR remote) is used to access dispenser functions and
sub-functions, and diagnostics (statistics). When held close to the infrared eye on the display
board, the remote can be used to set unit prices, fueling point IDs, and read electronic total-
izers.

Figure 3.1: Infrared Remote Control (IRC or IR Remote)


A description of each key on the IR remote is given in the following table.

IRC When F - - When F 'xx' When xx.xx sub-


keys is shown on the is shown on the function
unit price display unit price display is shown on the
unit price display

NEXT F00 Next higher func- Next higher sub-


tion # function level

WM048521 Rev 07 - PRELIMINARY 11/2014 15


3 Operation

IRC When F - - When F 'xx' When xx.xx sub-


keys is shown on the is shown on the function
unit price display unit price display is shown on the
unit price display

UP S - - (statistics Next higher func- Next higher sub-


mode) tion # function level
DOWN S - - (statistics Next higher func- Next higher sub-
mode) tion # function level
ENTER Pressing 3 times sub-function level Back to function
will exit configura- (xx.xx) level (except while
tion mode without entering new val-
saving ue, it displays the
change)
CLEAR n/a F-- Back to function
level (except while
entering new val-
ue; can be used to
erase last digit
typed)
# n/a n/a Must use this key
to enter new data
DIGITS After pressing EN- After pressing EN- If you clear the
TER, will take you TER, will take you display with the
to the Function to the Function "#" key first, it will
level of the digits level of the digits change the value
entered entered of the sub-function
to the digits en-
tered after press-
ing ENTER

Note!
When in Statistics mode (S - - ) or (S "xx") are shown on the Unit Price Display, the above
commands work the same way.

3.4 Basic Dispenser Requirements


Unit prices must be set and the dispenser must be authorized for the dispenser to operate.
If the dispenser is connected to a POS control system and you want to operate the dispenser
in the stand-alone mode independently from the control system, perform the following steps:
• Use IR remote control and set the Filling Mode to Stand-alone.

3.5 Programming Functions


• Change Unit Price (F03)

16 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

• Exit Function (F00)


• Filling Modes (F01)
• Password Change (F33)
• Access to Functions

3.6 Access to Functions


Press the CRC button on the iGEM board.
Access the programming mode by pressing one of the following keys on the remote control:

"1" Station manager entry using the station manager password


"2" Operator entry using the operator password

The programming mode asks you for a password twice before allowing access to the functions.
A 10-second time-out is built into the password entry code.
After 3 seconds the display shows:

When the word PASS 1 appears on the sales display, you have 20 seconds to start entering
the password entry code. The timer restarts after you press a key. When you finish entering
the password, press <ENTER> (=E).
PASS 2 appears in the sales display window, prompting you to enter the password again.
The display shows:

Note!
If you press nothing more, press <ENTER> (=E) or press the wrong password, or there is
no confirmation after pressing the password and the <ENTER> key, the computer will leave
this function automatically after 10 seconds.

Note!
If you press the wrong keys, press <CLEAR> (=C) key to erase the last digit you typed.

Press again the pasword to confurm and press <ENTER>.


Press <ENTER>.
The display shows the Function screen:

WM048521 Rev 07 - PRELIMINARY 11/2014 17


3 Operation

When you enter the programming mode, the unit price display windows show "F - -", the
money display window shows the software version number, and the volume display window
shows the software version number, and the volume display window shows the date of the
software version. To edit or view specific functions, enter any function number using the
number keys and press <ENTER>. The corresponding number appears in the money display
window.

3.7 Annunciator Operation Check


Check that the annunciator (beeper or buzzer) is operating properly on each side of the dis-
penser. When pressing the keys on the CAT keypad or the Push-to-Start / Grade Select
buttons on the bezel, you should hear the annunciator beep.

3.8 Set Clock Function (F 02)


Function F02.00 displays the time (HH.MM), F02.01 is the date (MM.DD) and F02.02 is the
year (YY.YY)

IRC Command Volume Display Status Display Unit Price Dis-


play

Press either EN- PASS 1


TER, 1, or 2, de-
pending on access
level
Type the corre- PASS 2
sponding pass-
word
Press ENTER
Type the pass- iGEM software Date F--
word again setting
Press ENTER
Type 2 ------ F 02
Press ENTER
Press ENTER ------ Time in HH.MM 2.00
format
Press # Time in HH.MM 2.00
format

18 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

IRC Command Volume Display Status Display Unit Price Dis-


play

Type the current ------ Entered time in 2.00


time in 24-hour HH.MM format
format of HH.MM
- Press ENTER
Press NEXT ------ Date in MM.DD 2.01
format
Press # date in MM.DD 2.01
format
Type the current ------ entered date in 2.01
date in the format MMDD format
of MMDD
- Press ENTER
Press NEXT ------ year in YYYY for- F 02
mat
Press # year in YYYY for- F 02
mat
Type the current ------ current year in F 02
year in the format YYYY format
of YYYY
- Press ENTER
Press ENTER ------ F 02

3.9 Exit Function (F00)


Use this function to select one of three maintenance mode exits.

Press 00
Press <ENTER> the display shows:

Press <ENTER> the display shows:

WM048521 Rev 07 - PRELIMINARY 11/2014 19


3 Operation

Press <#> the display shows:

Select one of three mainte-


nance mode exits:
01 = Do not exit and do not save changes
02 = Exit, but do not save changes
03 = Exit and save changes
Press <ENTER> If you have entered 03, the display
shows:

Press <ENTER> the display shows:

3.10 Password Change (F33)


For access to functions, see Section 3.6 Access to Functions, on page 17
Select this function to change the password.

Press 33
Press <ENTER> the display shows:

Press <ENTER> the display shows:

Select the sub-function with


<NEXT>:
33.01 Station Manager Password
(max. 6 characters)
33.02 Station Operator Password
(max. 6 characters)

20 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

Press <#>, the money display Dashes appear instead of regular en-
goes blank. tries, as shown:
Enter the new password.

Press <ENTER> the display shows:

Enter the new password twice Dashes appear instead of the regular
(2 times) entries:

Press <ENTER> If the password is correct, the dashes


and PASS flashes

Press <ENTER> If the password was changed, the


dashes flash

Note!
Use F00 Exit Function - Option 3 to exit and save changes.

3.11 Filling Modes (F01)


For access to functions see Section 3.6 Access to Functions, on page 17
Select this function to change the Filling Mode.

Press 01
Press <ENTER> the display shows:

Press <ENTER> the display shows:


(the actual status is shown on volume display)

Press <#> the amount shows blanks:

WM048521 Rev 07 - PRELIMINARY 11/2014 21


3 Operation

Enter the new Fill- (the new Operating mode is shown on amount
ing Mode display)

1 = Serial Mode - dispenser controlled by site con-


troller via serial link.
2 = Stand Alone Mode - dispenser not supervised
by a site controller
3 = Serial W&M mode - same as #1 but 3 volume
decimals
4 = Stand Alone W&M - same as #2 but 3 volume
decimals
5 = Serial W&M Mode - ATC, inspection of tempera-
ture compensation
6 = Stand Alone W&M Mode - ATC, inspection of
temperature compensation
Press <ENTER> the display shows:
the new Operating mode is shown on volume dis-
play

Press <ENTER> If the Filling Mode was changed, the dashes flash

Note!
To exit and save changes uses F00 Exit Function, option 3.

3.12 Setting Unit Prices

3.12.1 F03 - Set Side A Unit Prices


Sub-function numbers are in the format below.
.0N Set prices
.1N Not used (Set cash prices)
N Logical nozzle number 1-4 (5-8 (optional)

Note!
The Unit Prices are initialised after Coldstart to 99.01, 99.02, 99.03, 99.04 and so on.

22 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

3.12.2 F04 - Set Side B Unit Prices

Note!
The Unit Prices are initialised after Coldstart to 9911, 9912, 9913, 9914.

3.12.3 Changing the Unit Price (F03)


If a control system is connected, its prices override the prices in the pump and the prices
programmed in this sub-function are not used.

3.12.3.1 Changing Prices on Side A


For access to functions go to Section 3.6 Access to Functions, on page 17.
The display shows the function screen.

Press 03 The display shows:


Press <ENTER>

Press <ENTER> The display shows:

Note!
To access the other unit price, press <NEXT>

Sub-function 3.01 is responsible for changing unit price of fuel at nozzle 1 on side A and so
on, according to the table below.

Sub-Function Nozzle Side


Credit Prices (Position)

3.01 1 A
3.02 2 A

Sub-Function Nozzle Side


Cash Prices (Position)

3.11 1 A
3.12 2 A

Example: I have two pumps programmed to a unit


price of €1.300 and want to change to €1.420.
Perform the following steps:

WM048521 Rev 07 - PRELIMINARY 11/2014 23


3 Operation

Press the <#> key. The dotted part on


paying total of dis-
play will be erased.

Enter the desired value


Example: 1420

Press <ENTER> The display shows:

To change from one sub-functon to another use


the <NEXT> key.
(Example: from 3.01 to 3.02)
The same procedure applies to change the cash
proces
(Sub-functions 3.11 to 3.12)
To SAVE all changes, follow EXIT procedure of
"F00" exiting, value 3. (Refer to table)

3.12.3.2 Changing Prices on Side B


Sub-function 4.01 is responsible for changing unit price of fuel at nozzle 1 on side A and so
on, according to the table below.

Sub-Function Nozzle Side


Credit Prices (Position)

4.01 1 B
4.02 2 B

Sub-Function Nozzle Side


Cash Prices (Position)

4.11 1 B
4.12 2 B

Example: I have two pumps programmed to a unit


price of €1.300 and want to change to €1.420.
Perform the following steps:

24 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

Press the <#> key. The dotted part on


paying total of dis-
play will be erased.

Enter the desired value


Example: 1420
Press <ENTER> The display shows:

To change from one sub-functon to another use


the <NEXT> key.
(Example: from 4.01 to 4.02)
The same procedure applies to change the cash
prices.
(Sub-functions 4.11 to 4.12)
To save all changes, follow exit procedure of "F00"
exiting, value 3.

3.13 Authorizing the Dispenser


The dispenser must be authorized before it will dispense product.
The dispenser filling mode is set in programming function F01. In stand-alone mode (not
connected to a control system), the dispenser is always authorized.
When connected to a control system, the system programming determines authorization.

3.14 Disable Stand-alone Operation


Once the dispenser is switched over to the POS control system, standalone operation may
not be required. As an extra security measure, the jumper that enables stand-alone operation
may be removed. The jumper (J6) is located on the unit price display board as shown in
Figure 3.2.
1 Access dispenser Filling Mode function F 01 and set sub-function to 1.01 for serial mode.
2 Open the service door.
3 Remove the J6 jumper from the Unit Price Display board (Figure Figure 3.2).
4 Close and lock the service door.

WM048521 Rev 07 - PRELIMINARY 11/2014 25


3 Operation

J6 jumper

Figure 3.2: Sales Display with J6 Jumper

3.15 Operating the Dispenser


1 Remove the nozzle from the nozzle boot for either the blended hose or the single product
hose. The nozzle boot switch will turn on. The unit price displays of the product(s) not
selected will show dashes.
2 Push a grade selection button for the desired product to select one of the products from
the blending hose, or the one product from the single product hose. The dispenser will
reset and prepare for delivery. The sale display will show all eights, then blanks, then the
money and volume portion of the display will reset to zero. The unit prices not selected
will be blank or show dashes. The grade selection button that was pressed will be contin-
uously lit; the others will be dark. The correct pump(s) will start at the beginning of the
reset cycle and the solenoid valve(s) will open approximately three seconds later. Product
selection can be changed any time before product flow is sensed by the computer.
3 Dispense product. (Pressing the optional Stop button will stop product flow only. The
nozzle boot switch must be cycled and the dispenser must then be reset before that side
of the dispenser can continue operation.)
4 Return the nozzle to the nozzle boot. The nozzle boot switch will turn off; the sale will be
complete and ready to pay.

3.16 Initial Delivery


To dispense product from a newly-installed dispenser, make sure unit prices are set (as
previously described) and proceed as follows:
1 Authorize the dispenser.
2 Remove the nozzle, start the reset sequence and observe the reset cycle; make sure all
sales display and unit price display elements operate.
3 Check that when reset is started, the correct submersible pump motor is activated, and
at the end of the display reset (approximately three seconds) the solenoid valve(s) opens
(listen for the audible click of the valve(s).

26 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

4 After verifying air is bled properly from each trunk line, slowly dispense product through
each dispenser until free of air. Dispense enough product through each hose of each
dispenser to ensure the dispenser and the lines are free of air, before checking the meters.

Note!
Make sure the product lines are properly bled before dispensing any product through a
remote dispenser.

3.17 Restarting After Power Failure or Shutdown


After loss of power, the display accurately displays the amount of the sale, in money and
volume, for approximately 15 minutes. When power is restored, all sales information returns
to the displays. Any sales in progress will be ended; old sales should be paid and the dispenser
reauthorized if more product is to be dispensed.
If the dispenser does not operate properly when power is restored (does not deliver product,
or does not reset), record both the money and volume shown on the display (so sales can
be paid for) and perform the following:
1 Ensure all nozzles on the side are in their nozzle boots.
2 Authorize the dispenser.
3 Remove the nozzle from the nozzle boot. The dispenser should operate normally. If the
dispenser does not resume normal operation, try cycling power as described in the next
section.

3.18 Cycling Power to Clear Faults


If a fault in the dispenser is detected by the computer, an error message will be displayed in
the sale display as described in Section 3.19 Error Codes, on page 27. Record the displayed
error message. It may be possible to restart the dispenser by following the sequence below:
1 Ensure all nozzles are properly seated in the nozzle boot.
2 Turn the control power circuit breaker OFF for approximately five seconds. The dispenser
annunciator will sound. Turn the control power circuit breaker ON; the dispenser annunci-
ator will again sound.
3 Authorize the dispenser.
4 Remove the nozzle from the nozzle boot. The dispenser should operate normally.
If it is not possible to restart the dispenser using this procedure, or if an error message con-
tinues to be displayed, consult appropriate service personnel. Be certain to give the service
personnel the amount at which the dispenser stopped and the exact error message.

3.19 Error Codes


Computer error codes can be displayed on the side of the dispenser where the error occurred
by accessing the sub-functions S21.XX for Side 1 and S22.XX for Side 2, where XX is between
01 and 50 and represents the error/events records maintained by the computer program -
with 01 being the most recent. The computer can store up to 50 errors per side, continuing
to store errors beyond the 50th by cycling the error buffer with new errors inserted at the top
of the buffer. When this happens, an error is deleted at the bottom of the buffer for every new
error that is inserted in the top of the buffer.

WM048521 Rev 07 - PRELIMINARY 11/2014 27


3 Operation

Errors are displayed in an alternating 2-page format. Information in the error pages is given
below.

Page 1 error information Page 2 error information

HH.MM MM.DD.YY
CC.DD.NN C

Where: Where:
HH = hour MM = month
MM = minute DD = day
CC = error code YY = year
DD = device number C = filing count
NN = logical nozzle number

The complete description of the error codes is given in the Helix Programming Manual (p/n
WM048525).
Computer errors are read by entering the Maintenance Mode and accessing the correct
statistical function and its sub-functions. Perform the following steps using the remote control.
Bold type denote remote control function; italicized type represents dispenser response.
Accessing the error code Sub-function.
1 Press ENTER. PASS 1 (enter password).
2 Press ENTER. PASS 2 (enter password).
3 Press ENTER. The unit price display will show F.
4 Press either UP or DOWN to enter the statistics viewing mode. The unit price display will
show S— indicating that a number needs to be selected.
5 Press 21 to access S21 (error data for Side 1 or A which is the junction box side).
6 Press ENTER. The unit price display will show 21.01, the first and most recent error data
for Side 1. The data will be displayed in the 2-page format described earlier, in an alternat-
ing sequence, at a 1 second per page rate.
7 Pressing NEXT accesses 21.02 and the display shows information for the second error
logged. By pressing NEXT, the error buffer can be viewed completely.
8 To exit, press CLEAR, then UP or DOWN. The unit price display will show S—.
9 Press ENTER three (3) times to exit to the normal display.

3.20 Resetting After All Stop


This section applies to Helix dispenser models connected to a Point of Sale (POS) system.
Pressing the All Stop key on the POS system sends a signal to the dispenser computer to
interrupt product flow.
To resume product flow, refer to the applicable manual for the Point of Sale system used at
your location.

28 WM048521 Rev 07 - PRELIMINARY 11/2014


3 Operation

3.21 Electronic Totalizer Readings

3.21.1 Totalizer Volume Readings by Meter Position


Meter volume totals are stored in statistical functions that are accessed using the remote
control. The totals for Side 1 are stored in function S05 and those for Side 2 are stored in
function S06. The value of the meter totals are stored in the sub-functions that take the format
.M0, where M is the meter number. For example, M=5 for the high feedstock iMeter located
on Side 1 of a remote series blender. For Side 2 of the same meter, M=1.
Meter electronic totalizers are read by entering the Maintenance Mode and accessing the
correct function and associated sub-functions. Perform the following steps using the remote
control. Bold type denote remote control function; italicized type represents dispenser re-
sponse.
Accessing the Meter Volume Totalizer Sub-function for Side 1:
• Press ENTER
PASS 1 (enter password).
• Press ENTER
PASS 2 (enter password).
• Press ENTER. The unit price display will show F.
• Press either UP or DOWN arrow to enter the statistics viewing mode. The unit price display
will show S— (indicating that a number needs to be selected).
• Press 05 to access S05.
• Press ENTER. The unit price display will show S05 (indicating that the statistical function
has been accessed).
• Press ENTER to access the sub-functions of S05. The unit price display will show 5.10
(note here that M=1).
Consecutive pressing of NEXT will allow access to the next sub-function, incrementing the
value of M by (.1). For example, to access S05.20, press NEXT. The unit price display will
show 5.20. The value of the meter volume totals is shown in a format such that the least
significant six (6) digits of the data value appear on the volume display, while higher order
non-zero digits of the data value, if present, appear on the money display. Leading zeros
appear as blanks.
Quick Exit
1 Press the CLEAR key until the unit price display window shows S - - .
2 Press ENTER three times. This causes the maintenance mode task to immediately termi-
nate.

3.21.2 Electro-Mechanical Totalizer Operation


Totalizers are optional on Helix dispensers. Electro-Mechanical totalizers are located on the
junction box side of the dispenser. There is one totalizer for each meter. The totalizer positions
on the bezel relate to the meter position numbers. The physical position of the totalizers, left
to right, on the bezel represent meter positions.

WM048521 Rev 07 - PRELIMINARY 11/2014 29


3 Operation

The totalizer shows seven digits and reads in whole units (gallons or liters). Fractional amounts
that are left over from a previous sale are stored in the dispenser computer. When the next
sale of the same product ends, if the fractional amounts from the new sale and previous
sale(s) combined are one (1) whole unit or greater, the Electro-Mechanical totalizer is adjusted
one whole increment; i.e., if five consecutive sales end with a fractional amount of .2, the
Electro-Mechanical totalizer will not account for the fractions until after the fifth sale.

30 WM048521 Rev 07 - PRELIMINARY 11/2014


4 Operator Maintenance

4 Operator Maintenance

CAUTION!
Fire Hazard!

Do not re-install a broken break-away valve. In-


stalling a damaged valve may result in a hazardous
condition that could result in serious injury by fire
or explosion.

Note!
To prevent damage to components located in the hydraulic cabinet, dispenser doors should
be in place during rainy and/or icy weather conditions.

4.1 Hose and Hose Retractor

Note!
On dispensers equipped with the Hose Retractor option, the hose clamp must be mounted
upstream of the breakaway device to avoid damage to the dispenser in the event of a drive-
off.

The combined hose, breakaway, and whip maximum lengths are listed below.

Crossover type Loopback type Loopback type


1 hose per side 1 hose per side 2 hoses per side

14 ft
(4.27 m)
Non-vapor 3/4 in. 10 ft 10 ft
(.019 m) (3.05 m) (3.05 m)
Non-vapor 5/8 in. 14' 0" 14' 0"
(.016 m) (4.27 m) (4.27 m)

4.2 Filter / Strainer - Remote


The filter should be changed and the strainer cleaned on a regular basis. A dirty filter and
strainer may cause the dispenser to deliver fuel slowly. In some cases, this may appear to
be a more serious service related problem, when simply changing the filter and cleaning the
strainer is all that is required.
Before removing the filter, trip the impact valve and turn OFF the circuit breaker for the asso-
ciated submersible pump.

WM048521 Rev 07 - PRELIMINARY 11/2014 31


4 Operator Maintenance

The fuel filter is removed the same way an oil filter is removed from a car engine. As shown
below, the new fuel funnel catches any fuel that is spilled and will properly drain it into a
container. Place a container under the funnel spout when changing the filter.
To install the new filter, first apply a film of oil to the gasket and hand turn until the gasket
contacts the base. Then tighten one half turn. Open the emergency shear valve, turn the
submersible circuit breaker ON and check for leaks.
In new installations it may be necessary to change the filter frequently in the first few days
of operation in order to ensure proper operation.
The strainer is located inside the casting and held in place by the filter. Place a suitable
container below filter/strainer casting to catch product and sediment. Remove the filter and
gently pull the strainer out of the filter/strainer casting. Clean strainer screen of any debris.
Reinstall strainer and a new filter.
If the underground installation is new, it may be necessary to clean the strainer screen two
or three times the first few days of operation to remove debris and pipe dope. After this, oc-
casional cleaning of the strainer is all that should be required. The fuel filter should be changed
whenever the strainer is cleaned.

WARNING!
Electric Shock Hazard!

Before removing the filter and strainer turn the


power to the dispenser and submersible pump(s)
off and close the emergency shut-off valves on the
dispenser being serviced. Failure to do so may
result in a hazardous condition that can result in
serious injury due to electric shock.

Figure 4.1: Remote filter

32 WM048521 Rev 07 - PRELIMINARY 11/2014


4 Operator Maintenance

4.3 Dispenser cleaning


Dispenser cleaning should be done frequently and in the manner outlined below. We can not
stress enough that regular care of the dispenser is the most important element of the cleaning
procedure. It prevents dirt and liquids from permeating the surface materials and forming
stains that can only be removed with more abrasive and aggressive cleaning methods.

Note!
Do not use pressurized water (even from a garden hose) to wash or rinse off a dispenser.
Under no circumstance should power washers be used to clean a dispenser. This can force
water into the electronic head and cause damage to the electronic components in the dis-
penser rendering it inoperative.
Do not use all-purpose cleaners.
Do not use gasoline or other petroleum-based products to clean the dispenser.
Use only mild cleaners such as regular manual dish washing detergents or soap! Wayne
takes no responsibility for damage on the product caused by aggressive cleaning detergents
not approved for cleaning use by Wayne.

Note!
It is important to wipe down the dispenser with a clean cloth and clear water after every
cleaning.

Note!
Periodic waxing of the dispenser surfaces is essential to maintain the original finish and in-
hibit corrosion. Stainless steel surfaces should be polished with a non-abrasive silicone wax.

Note!
No chlorine based cleaners can be used on the stainless steel.

4.4 Meter Maintenance


All dispenser meters are calibrated and sealed at the factory prior to shipment and delivery.

WM048521 Rev 07 - PRELIMINARY 11/2014 33


A Dissasembly - Recycling

Appendix A Dissasembly - Recycling

WARNING!

Disconnect mains power prior to any work, to pre-


vent damage which may result in electric shock or
fire.

WARNING!
Danger of tipping!

Please note that the centre of gravity is not in the


centre, and varies from one pump model to anoth-
er.

A.1 Empty the fuel out of the pump


It is important that there is no fuel in the pump before disassembly.
Blank the inlet pipes with a flange and gasket.
Between one and four pump units must be emptied and blanked, depending on the pump
model.
If necessary, ask a transport company for special regulations.

Part no. Name

Flange for blinding of the inlet pipe


WB000232-0004 Washer, BRB 8, 4X16 FZ (3p)
WB000228-0004 Nut, M6M M8 FZB (3p)
WM004482 Transport gasket for new inlet
WM004481 Flange blind for new inlet

A.2 Dispenser recycling


The dispenser must be recycled according to the applicable regulations in the country where
it is installed.

WM048521 Rev 07 - PRELIMINARY 11/2014 35


B Declaration of Conformance

Appendix B Declaration of Conformance

The 'X' suffix after the certificate number relates to the following special condition for safe
use:
1 When intended for use with ethanol blended fuels the user shall:
• ensure that the fuel shall not excess 90% ethanol with minimum water content;
• access the suitability of parts used in the construction of the fuel system for long term
suitability with such fuels with due regard to the use corrosion inhibitors;
• give due consideration to the correct selection of supplementary fittings (safe breaks,
etc.).
2 Where petrol fuel dispensers are shipped without nozzles, the equipment shall be fitted
with nozzles complying with EN13012 prior to being put into use.
3 Where petrol fuel dispensers are shipped without hoses, the equipment shall be fitted with
hoses complying with EN1360 or EN13483 prior to being put into use.

36 WM048521 Rev 07 - PRELIMINARY 11/2014


C Glossary of Terms and Acronyms

Appendix C Glossary of Terms and Acronyms

Table C.1:

TERM DEFINITION

additive a product added to the gasoline to enhance perfor-


mance
ALU aluminum
ambient the surrounding area or environment (as in ambi-
ent temperature)
Annunciator beeper, buzzer
ATC automatic temperature compensation
bezel the outer rim at the upper part of the dispenser
bleeding clearing the fuel lines of air (also, purging)
blender mixes two fuels together to obtain a third; a
blending dispenser
blend ratios the amount or quantity of each of the two fuels
added together to obtain the third fuel
board a printed circuit board; one of the electronic boards
in the dispenser
bootstrap (as in computers, loading software)
breakaway device between the hose and dispenser that
breaks if the hose is accidentally pulled by the car
breakaway valve see emergency valve
C&PR valve Check and Pressure Relief Valve
CAT customer-activated terminal
circuit breaker a type electrical device
conduit enclosure used for routing electrical wires
coupling small section of pipe used to connect two pipes
together
C-syle the frame of a dispenser in the shape of the En-
glish letter C
current loop a communication circuit used by the dispenser
and POS system
double bump tube a tube having two raised areas on the ends

WM048521 Rev 07 - PRELIMINARY 11/2014 37


C Glossary of Terms and Acronyms

TERM DEFINITION

drip pan a catchement container (to catch liquids)


drip pan a pan used to drain or catch the fuel to keep it from
spilling onto the ground
EH electronic head
EHPM electronic head and payment terminal
electro-mechanical mechanical device controlled by electricity (as in
electro-mechanical totalizer)
emergency valve this valve is designed to close the fuel suupply line
if a vehicle crashes into the dispenser or if there
is fire in the dispenser; also known as shear valve,
crash valve and breakaway valve
EMT electro-mechanical totalizers
ESD electro-static discharge
filter device that captures small unwanted particles in
the gasoline or diesel fuel
fuel funnel used to drain fuel into a pan or container in order
to prevent spilling
fueling point identification a number assigned to a dispenser so that it can
address (FPID) be identified on a communications network
gross volume the amount or volume of fuel before temperature
compensation
Healy name of a vapor recovery system
high capacity dispenser is designed for a higher fuel flow rate
and therefore delivers a higher volume of fuel as
compared to a standard capacity dispenser
hose flexible tubing that connects the nozzle to the dis-
penser and where gasoline, petrol, or other product
flows through
H-style the frame of a dispenser in the shape of the En-
glish letter H
hybrid more than one source: (Wayne - Hybrid card
reader that reads both magnetic strip cards and
cards that contain a micro-chip that has the card
number
inlet location at a meter, valve, or casting where the
fuel enters

38 WM048521 Rev 07 - PRELIMINARY 11/2014


C Glossary of Terms and Acronyms

TERM DEFINITION

Intrinsic Safe Barrier (ISB) barrier inside the dispenser - the area below the
barrier is free from hazardous electrical sparks
island-oriented when the nozzle is located on the left or right sides
of the dispenser, as opposed to front or back sides
jitter unwanted electrical pulses or interference (as in
jitter pulses)
jumper small wire or connector used to join together to
pins in a connector or on a circuit board
junction box a metal box located near the bottom of the dis-
penser
lane oriented when the nozzle is located on the front or back
sides of the dispenser as opposed to th left or right
sides
LEE lower electronic enclosure
low hose the fuel hose is connected near the middle of the
dispenesr, as opposed to high at the top
LT low temperature
LTS lift-to-start (to activate dispenser)
meter dispenser component that measures the amount
of fuel dispensed.
net volume the amount or volume of fuel after temperature
compensation
nozzle device at the end of the hose that is inserted into
the vehicle (or container) when dispenseing prod-
uct
nozzle boot the holder (on the dispenser) of the nozzle when
it is not in use
outlet location at a meter, valve, or casting where the
fuel exits
outlet casting a metal or aluminum type mold where the hose is
connected to the dispenser
P/N part number
payment terminal (PT) as in payment terminal on the dispenser where a
payment is made by credit card
pedestal platform or base that the dispenser sits on (also
referred to as 'island' in some areas)

WM048521 Rev 07 - PRELIMINARY 11/2014 39


C Glossary of Terms and Acronyms

TERM DEFINITION

pipe dope sealant used on the threads of a pipe; pipe sealant


POS Point of Sale
prime to pour fuel into the pump to clear out the air in
order to start the pump properly
product tube fuel tube; the tube that contains the fuel or that
fuel moves through
PTS push-to-start (to activate dispenser)
pulser device that generates signals
purge clearing the fuel lines of air
relay an electrical component used in the dispenser
remote (pump) the pump for the dispenser is located in the under-
ground tank; not inside the dispenser
residual something left over or remaining (as in residue)
retainer clip (pin) used to secure or hold a tube in place
retractor pulls hose back into place after use
sales/volume display shows the total sale amount and the volume dis-
pensed
satellite (dispenser) a small dispenser connected to and controlled by
another dispenser that is referred to the master
servTerm a software application also known as the Service
Terminal program
shear valve see emergency valve
sight glass a glass cylinder used for visually measuring vol-
ume of fuel
Small-style a short (small) type of dispenser
softkey as in buttons or keys on a keypad
solenoid valve electro-mechanically operated valve
SPM secure payment module
stand-alone mode dispenser is not connected to or communicating
with the POS
Std standard
strainer device that captures small unwanted particles in
the gasoline or diesel fuel

40 WM048521 Rev 07 - PRELIMINARY 11/2014


C Glossary of Terms and Acronyms

TERM DEFINITION

submersible pump that is located in the underground tank


suction (pump) the pump for the dispenser is located inside the
dispenser
torque rotating force applied to tighten; amount of force
used to tighten a screw or pipe
Torx™ a brand name of a type of screw
TOT totalizer -
totalizer (TOT) device on the dispenser that counts and displays
the total volume units
TRAC Transponder-activated CAT
triple bump tube a tube having three raised areas on the end
unit price display (UPD) shows the fuel price per gallon or per litre
universal joint a type of coupling
UPD Unit Price Display
UPS Un-interruptible Power Supply
vacuum air has been removed (as in a vacuum line)
valance cosmetic panels around the top of the dispenser
vapor recovery system that claims fuel vapors, minimizing expo-
sure to the customer and environment
WIP Wayne Intelligent Pulser; a type of meter manufac-
tured by Wayne
Xflo a type of meter manufactured by Wayne

WM048521 Rev 07 - PRELIMINARY 11/2014 41


Warranty
Any alternations or, additions to, or unauthorized work performed on the equipment without
manufacturer’s express written consent shall void any existing product warranty. Please see
product warranty information for additional details.
Use only genuine parts.

Copyright notice
© 2014 Wayne Fueling Systems
The contents of this manual may not be copied in whole or in part without the express written
consent of Wayne Fueling Systems.
Wayne Fueling Systems reserves the right to make revisions to this manual without prior
notice.

WM048521 Rev 07 - PRELIMINARY 11/2014


Headquarters Wayne Sweden Wayne China Wayne Brazil
Wayne Wayne Dresser Wayne Fuel Dresser Industria e
Dresser, Inc. Hanögatan 10 Equipment Comercio Ltda.
3814 Jarrett Way Box 50559 (Shanghai) Co., Ltd. Estrada do Timbo
Austin, TX 78728 SE-202 15 Malmö 1221 Dong Lu Road 126-Bonsucesso
USA Sweden Pudong, Shanghai Rio de Janeiro, Brasil
China

© 2014 Wayne Fueling Systems WM048521 Rev 07 - PRELIMINARY 11/2014

Источник: https://www.scribd.com/document/540958110/Wm048521-Helix-6000-Iec-Def

Notice: Undefined variable: z_bot in /sites/theindy.us/download/dirt-3-license-keytxt-download-free-activators.php on line 178

Notice: Undefined variable: z_empty in /sites/theindy.us/download/dirt-3-license-keytxt-download-free-activators.php on line 178

4 Comments

  1. I received the sum of 10,000 pounds from premiumtoolsaid,com,they are legit,.,..,,.,.

Leave a Comment