Windows PE (WinPE) Free Download for Windows 7/8/10

12.10.2021 0 Comments

Windows PE (WinPE) Free Download for Windows 7/8/10

Live CD; WinBuilder, a tool for creating Windows PE-based live CD/DVD or horror 2010 full movie hindi free download mastering autodesk. WinPE environment upgraded to Windows build 2004; Improved Boot Disk DoD-compliant disk erasing & wiping of free space on PC disks, securely erase data. Beautiful Windows PE based on Windows 7, Packed with full of useful software, Fully functional tested inside VMware, Small iso size will fit. Windows PE (WinPE) Free Download for Windows 7/8/10

: Windows PE (WinPE) Free Download for Windows 7/8/10

Lungo 1.9.0 MacOS Full Crack + Torrent Free Download
Malware hunter team - Crack Key For U
Helium Music Manager Premium 15.0.17747.0 Crack Serial Key Free
Little Snitch 4.5.2 Crack

Lazesoft Recovery Suite

Freeware

Freeware programs can be downloaded used free of charge and without any time limitations. Freeware products can be used free of charge for both personal and professional (commercial use).

Open Source

Open Source software is software with source code that anyone can inspect, modify or enhance. Programs released under this license can be used at no cost for both personal and commercial purposes. There are many different open source licenses but they all must comply with the Open Source Definition - in brief: the software can be freely used, modified and shared.

Free to Play

This license is commonly used for video games and it allows users to download and play the game for free. Basically, a product is offered Free to Play (Freemium) and the user can decide if he wants to pay the money (Premium) for additional features, services, virtual or physical goods that expand the functionality of the game. In some cases, ads may be show to the users.

Demo

Demo programs have a limited functionality for free, but charge for an advanced set of features or for the removal of advertisements from the program's interfaces. In some cases, all the functionality is disabled until the license is purchased. Demos are usually not time-limited (like Trial software) but the functionality is limited.

Trial

Trial software allows the user to evaluate the software for a limited amount of sony acid pro 8 - Crack Key For U. After that trial period (usually 15 to 90 days) the user can decide whether to buy the software or not. Even though, most trial software products are only time-limited some also have feature limitations.

Paid

Usually commercial software or games are produced for sale or to serve a commercial purpose.

Click here to close

Источник: https://www.filehorse.com/download-lazesoft-recovery-suite/

Bootable Windows USB Drive: Guide for Windows XP, Vista, 7, 8, 8.1, 10

This guide explains how to create a Windows bootable USB drive for the following Windows versions: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10.

Creating a bootable USB drive will allow you to install Windows from the USB drive directly.

To be able to install Windows from a USB, you need have one of the following:

  • the ISO image of the Windows version
  • or the original installation disc of the Windows version

Contents

Prerequisites

Before you start creating a bootable USB flash drive to install Windows (XP, Vista, 7, 8, 8.1, 10), you need to make sure that:

  • The USB drive is empty and properly formatted
  • The USB drive is bootable
  • Your BIOS/UEFI is properly configured to boot from the USB flash drive first
  • You have the ISO image of Windows XP, Vista, 7, 8 or 8.1. If you have the original Windows installation disc, you can use that instead of the ISO image.
  • Software needed to write the ISO image to the USB drive or alternatives, such as Easy USB Creator 2.0 by NeoSmart or the Windows 7 USB/DVD Download Tool by Microsoft.

USB Drive

The USB drive you want to make bootable should have at least 4 GB in available size.

BIOS/UEFI configuration

To make sure that your BIOS/UEFI is configured to boot from a USB drive, follow our Boot from USB drive guide. You need to make sure that:

If a Boot Device menu doesn’t appear on your screen where the USB drive is plugged-in, check the BIOS/UEFI settings. A Boot Device menu can look like this, depending on your computer model and Windows version:

If you are using a new computer with UEFI/EFI, make sure that the Boot Legacy option is enabled:

If you’re using a computer with Fast Boot option, make sure that Fast Boot is disabled.

If your BIOS menu doesn’t list a USB item in the BIOS settings, it may mean that it can’t boot from a USB drive. You can try with the USB drive plugged-in and then boot into BIOS directly.

If the item doesn’t appear, you need to use the original Windows installation CD or DVD to install Windows or access the repair tools.

If you need to use the repair tools of an original Windows installation CD/DVD, you can also use Easy Recovery Essentials and run Automated Repair to automatically find and fix boot errors.

Download Easy Recovery Essentials

ISO image

If you don’t have the ISO image Cinema 4D Keygen create the bootable USB drive, you can download an official image from Microsoft’s website.

You need to have the product (or license) key.

Create a Windows XP bootable USB

You can create a bootable USB drive with Windows XP by following these instructions.

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

Easy USB Creator 2.0 screenshot

Download Easy USB Creator 2.0

To burn Windows XP to a USB drive using Easy USB Creator 2.0, simply follow these steps:

  1. Download USB Creator 2.0
  2. Install Easy USB Creator 2.0
  3. Browse the Windows XP ISO Image to load at the ISO File field
  4. Select the destination of your USB Drive at the Destination Drive field
  5. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

If you have the installation disc (CD)

If you have the original Microsoft Windows XP Professional installation CD, you can use the CD to create a bootable USB using PE Builder.

It’s important to have the following before you start:

To create the bootable drive with Windows XP, follow these steps:

    1. Boot into the system
    2. Download the PE Builder software from http://www.nu2.nu/pebuilder/
    3. Install the PE Builder to. The final path should be to make the next steps easier.

Inside the PEBuilder folder, create a new folder named. This folder’s path should be .

  • Download the Windows Server 2003 SP1 archive from http://www.microsoft.com/en-us/download/details.aspx?id=1143…
  • Rename the archive downloaded from Microsoft to
  • Open Command Prompt. You can also open it by typing in the Run dialog box and pressing afterwards.
  • Type the command to go to the folder where the MS-WS-SP1.exe file exists: cd c:\downloads

    Don’t type MS-WS-SP1.exe in the path above. You only need to go to the folder where the file exists.

    Replace with the letter of the drive and the directory where the MS-WP-SP1.exe file exists.

  • Type to begin the extraction process, press
  • Choose to extract the files to the same folder, e.g. :
    PEBuilder: Extract Files

    PEBuilder: Extract Files

  • In Command Prompt, you now need to go to the extract folder at the i386 sub-folder.To do so, type the same command, if you’re still at the c:\downloads folder in Command Prompt and you haven’t created a new folder for the extracted files: cd i386

    If you created a new folder for the extract files, say Extract, in c:\downloads, update the cd command to go to that folder:

    cd c:\downloads\Extract

    Then, typepress

  • Once inside the i386 folder via Command Prompt, type: copy setupldr.bin c:\PEBuilder\SRSP1

    Replace with the path where the PE Builder software is installed, if this was changed in previous steps.

  • While still in Command Prompt, expand the ramdisk.sys file with this command: expand -r ramdisk.sy_ c:\PEBuilder\SRSP1

    Replace with the path where the PE Builder software is installed, if this was changed in previous steps.

  • Go to My Computer
  • Go to PEBuilder folder
  • Go to SRSP1 folder
  • Check that you have the 2 files listed there: setupldr.bin and ramdisk.sys
    PEBuilder: Check that you have the files copied

    PEBuilder: Check that you have the files copied

  • Insert the Windows XP Professional CD in the disk tray
  • Launch PE Builder
  • Make the following changes before you click Build:
    BartPE: Configuration for Windows XP USB

    BartPE: Configuration for Windows XP USB

    • At the Source field, type the letter of the drive for the Windows XP CD, e.g. e:\
    • At the Output field, type BartPE
    • Leave the Custom field blank
    • Media output should be None
  • Click Build
  • When the build process is complete, click Close
  • Go to Command Prompt and then go to the PEBuilder folder by typing the command: cd c:\PEBuilder
  • Type this command (make sure the USB flash drive is not removed) and press : pe2usb -f d:

    Replace with the letter of the drive where your USB flash drive is loaded.

  • Typewhen prompted to begin the process. Press after typing YES.
  • Press any key to exit the pe2usb process, after the process is complete
  • Safely remove the USB flash drive from the port
  • Remove the Windows XP CD from the disk try
  • Reboot the system to check if the USB flash drive is now bootable with Windows XP Professional

 

If your computer doesn’t boot into the USB drive directly, go to Prerequisites > BIOS/UEFI configuration or read the Boot from USB drive guide to configure your BIOS menu to boot from a USB device first.

Create a Windows Vista bootable USB

Depending if you have the ISO image of Windows Vista or the original DVD, you can use Easy USB Creator 2.0 or the diskpart utility to create the bootable USB.

If you have the ISO image

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

Easy USB Creator 2.0 screenshot

Download Easy USB Creator 2.0

To burn Windows Vista to a USB drive using Easy USB Creator 2.0, simply follow these steps:

  1. Download USB Creator 2.0
  2. Install Easy USB Creator 2.0
  3. Browse the Windows Vista ISO Image to load at the ISO File field
  4. Select the destination of your USB Drive at the Destination Drive field
  5. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

To create the bootable drive with the Windows 7 USB/DVD Download Tool, follow the steps from Using the Windows 7 USB/DVD Download Tool from Windows 8/8.1.

While the name is “Windows 7”, you can use the tool for Windows Vista systems too.

If you have the installation disc (DVD)

To create a bootable USB with Windows Vista and install the operating system from that USB drive, follow the steps.

You’ll be using the diskpart utility, available in Windows Vista, to make the USB drive bootable. You’ll copy the files from the installation disc (DVD) to the USB drive after the diskpart utility process is finished.

The instructions are:

  1. Boot your computer
  2. Open Command Prompt and run it as Administrator.You can go at Start > All Programs Accessories > Command Prompt or type in the search field.To run Command Prompt as Administrator, right-click on the Command Prompt item and select Run as Administrator.
  3. When Command Prompt opens, type this command and press : cd c:\windows\system32

    Replace with the letter of the driver where your Windows Vista is installed: C:\, D:\ etc.

  4. Insert the USB flash drive in the USB port
  5. Type: diskpart
  6. Press
  7. Type: list disk
  8. Press
  9. After you press Enter for the list disk command, Command Prompt will list the drives that are connected to your computer. Find the USB drive and its corresponding number.
    Command Prompt: list disk

    Command Prompt: list disk

  10. Then, type this command: select disk X

    Where is the number of the USB flash drive listed by Command Prompt.

    The confirmation message should be:

    Disk 1 is now the selected disk.
  11. Press
  12. Type and press
  13. Type and press
  14. Type and press
  15. Type and press
  16. Type this command and press afterwards: format fs=ntfs

    It may take a few minutes to format the entire USB flash drive, depending on its size. However, you can use the quick parameter to format the drive more quickly:

    format fs=ntfs quick
  17. Typepress
  18. Typepress
  19. Insert the Windows Vista DVD in the optical drive
  20. Go to My Computer
  21. Note the letter of the drive where the Windows Vista DVD is loaded, e.g. D:\, E:\
  22. Go back to Command Prompt and check if the USB flash drive has been formatted
  23. When the format process is complete, type this command and press : d: cd boot

    Replace with the letter of the drive where the Windows Vista DVD is loaded

  24. Then type and press
  25. Type this command and press : bootsect.exe /nt60 f:

    Where is the letter of the drive where your USB flash drive is loaded

  26. Copy all files from the Windows Vista DVD on the USB flash drive.To open the contents of the DVD (and not load the splash screen of the Windows Vista DVD), right-click on the drive and click Open.

If you followed the above instructions correctly, the USB flash drive should now be bootable with Windows Vista.

You can check this by plugging the USB and rebooting the system. To make sure that your computer boots from a USB drive first, and not from the hard disk, go to BIOS/UEFI configuration.

Create a Windows 7 bootable USB

You can create the bootable USB drive with Windows 7, if:

  • you have the ISO image of Windows 7
  • or you have the original installation DVD of Windows 7

If you have the ISO image

Using Easy USB June 2, 2021 - Free Activators 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

Easy USB Creator 2.0 screenshot

Download Easy USB Creator 2.0

To burn Windows 7 to a USB drive using Easy USB Creator 2.0, simply follow these steps:

  1. Download USB Creator 2.0
  2. Install Easy USB Creator Windows PE (WinPE) Free Download for Windows 7/8/10 the Windows 7 ISO Image to load at the ISO File field
  3. Select the destination of your USB Drive at the Destination Drive field
  4. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

Before you continue with these instructions, please make sure that:

The instructions are:

  1. Download Windows 7 USB/DVD Download Tool from http://wudt.codeplex.com/ and launch it
  2. At the Source File field, click Browse and find Reflector Pro 3.2.1 Crack Windows 7 ISO image on your computer and load it
    Windows 7 USB/DVD Download Tool: Source File

    Windows 7 USB/DVD Download Tool: Source File

  3. Click Next
  4. Select USB Device
  5. Select the USB flash drive from the drop down menu
  6. Click Begin copying
  7. Exit the application, when the process is complete

If you have the installation disc (DVD)

You can use a USB flash drive (see Prerequisites for more information) to install Windows 7 from.

To do so, you need to make the USB flash drive bootable first and then use the original Windows 7 installation disc (DVD) to copy the contents of the DVD to the USB drive.

The diskpart utility, part of Windows 7, will be used.

Follow these Windows PE (WinPE) Free Download for Windows 7/8/10 (similar to Create a Windows Vista bootable USB > If you have an installation disc):

    1. Start the computer
    2. Open Command Prompt as Administrator. Go at Start > All Programs Accessories > right-click on the Command Prompt item and select Run as Administrator.
    3. Enter the password for the Administrator account
    4. At Command Prompt, type: cd c:\windows\system32

      Replace with the letter of the driver where your Windows 7 is installed: C:\, D:\ etc.

    5. Press
    6. Insert the USB drive that you want to make bootable in an available port
    7. Type and press
    8. Type and press
      Command Prompt: list disk

      Command Prompt: list disk

    9. Find the USB drive and its corresponding number in the list provided by Command Prompt
    10. Type this command and press : select disk X

      Where is the number of the USB drive listed by Command Prompt above.

      The confirmation message should be:

      Disk 1 is now the selected disk.
    11. Typepress
    12. Typepress
    13. Typepress
    14. Typepress
    15. Type and press .

You can use the quick parameter to format the drive more quickly:

  • Insert the Windows 7 DVD and go to My Computer. Note the letter of the drive where the DVD is loaded, e.g. D:\, E:\
  • Typepress
  • Typepress
  • After the format process is complete, type this command in Command Prompt and press : d: cd boot

    Where with the letter of the drive where the Windows 7 DVD is loaded.

  • Typepress
  • Type this command and press Enter: bootsect.exe /nt60 f:

    Where is the letter of the drive where the USB flash drive is loaded

  • Open the contents of the Windows 7 DVD: right-click on the drive and click Open
  • Copy all files from the DVD to the USB

 

Create a Windows 8 / 8.1 bootable USB

Depending if you have the ISO image of Windows Vista or the original DVD, you can use Easy USB Creator 2.0 to create the USB if you have the ISO image or the diskpart utility to create the bootable USB, if you have the DVD.

If you have the ISO image

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

Easy USB Creator 2.0 screenshot

Download Easy USB Creator 2.0

To burn Windows 8 or 8.1 to a USB drive using Easy USB Creator 2.0, simply follow these steps:

  1. Download USB Creator 2.0
  2. Install Easy USB Creator 2.0
  3. Browse the Windows 8 or Windows 8.1 ISO Image to load at the ISO File field
  4. Select the destination of your USB Drive at the Destination Drive field
  5. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

While the name is “Windows 7”, you can use this tool on a Windows 8 or 8.1 system too.

Before you continue with these instructions, please make sure that:

The instructions are:

  1. Launch the Windows 7 USB/DVD Download Tool
  2. At the Source File field, click Browse and find the Windows 8 or 8.1 ISO image on your computer
    Windows 7 USB/DVD Download Tool: Source File

    Windows 7 USB/DVD Download Tool: Source File

  3. Click Next
  4. Insert the USB flash drive in an available port on your computer. Make sure it’s loaded in My Computer.
  5. At Step 2, select USB Device to write the ISO image to the USB drive. You can click DVD to write the ISO image to a DVD instead.
    Windows 7 USB/DVD Download Tool: Choose Media Type

    Windows 7 USB/DVD Download Tool: Choose Media Type

  6. At Step 3, select the USB flash drive from the drop down menu. If the drive isn’t loaded yet, you can click on the Refresh icon next to the drop down menu.
  7. Click Begin copying
  8. When done, exit the Windows 7 USB/DVD Download Tool
    Windows 7 USB/DVD Download Tool: Done

    Windows 7 USB/DVD Download Tool: Done

If you have the installation disc (DVD)

If you have the original installation disc (DVD) of Microsoft Windows 8 or Windows 8.1 you can create a bootable USB drive.

To do so, follow the steps below:

  1. Boot into Windows 8 or 8.1
  2. Open Command Prompt as Administrator. To do so, press the and key to search for. From the search results list, right-click on Command Prompt
  3. Click Run as administrator
  4. Enter the password, when prompted
  5. When Command Prompt opens, type this command and press : diskpart
  6. Insert the USB flash drive in the port
  7. Typepress
    Command Prompt: list disk

    Command Prompt: list disk

  8. Identify the number next of the USB drive in the list provided by the list disk command
  9. Typepress. Replace with the number of the USB drive listed from above steps. Windows PE (WinPE) Free Download for Windows 7/8/10 src="https://neosmart.net/wiki/wp-content/uploads/sites/5/2014/09/cmd-select-disk-1.jpg" alt="Command Prompt: select disk" width="564" height="101">

    Command Prompt: select disk

The confirmation message should be:

Disk 1 is now the selected disk.
  • Typepress
  • Typepress
  • Typepress
  • Typepress
  • Typepress. To have the USB drive formatted more quickly, add the quick parameter:
  • Typepress
  • Typepress
  • Copy the contents of the Windows 8 DVD or 8.1 DVD to the USB flash drive
  • Create a Windows 10 bootable USB

    If you have the ISO image

    Using Easy USB Creator 2.0

    Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

    easyusb_win10

    Download Easy USB Creator 2.0

    To burn Windows 10 to a USB drive using Easy USB Creator 2.0, simply follow these steps:

    1. Download USB Creator 2.0
    2. Install Easy USB Creator 2.0
    3. Browse the Windows 10 ISO Image to load at the ISO File field
    4. Select the destination of your USB Drive at the Destination Drive field
    5. Start

    Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

    It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

    Using Windows 7 USB/DVD Download Tool

    The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

    While the name is “Windows 7”, you can use this tool on a Windows 10 system too.

    Before you continue with these instructions, please make sure that:

    The instructions are:

    1. Launch the Windows 7 USB/DVD Download Tool
    2. At the Source File field, click Browse and find the Windows 10 ISO image on your computer
      Windows 7 USB/DVD Download Tool: Source File

      Windows 7 USB/DVD Download Tool: Source File

    3. Click Next
    4. Insert the USB flash drive in an available port on your computer. Make sure it’s loaded in My Computer.
    5. At Step 2, select USB Device to write the ISO image to the USB drive. You can click DVD to write the ISO image to a DVD instead.
      Windows 7 USB/DVD Download Tool: Choose Media Type

      Windows 7 USB/DVD Download Tool: Choose Media Type

    6. At Step 3, select the USB flash drive from the drop down menu. If the drive isn’t loaded yet, you can click on the Refresh icon next to the drop down menu.
    7. Click Begin copying
    8. When done, exit the Windows 7 USB/DVD Download Tool
      Windows 7 USB/DVD Download Tool: Done

      Windows 7 USB/DVD Download Tool: Done

    If you have the installation disc (DVD)

    If you have the original installation disc (DVD) of Microsoft Windows 10 you can create a bootable USB drive.

    To do so, follow the steps below:

    1. Boot into Windows 10
    2. Open Command Prompt as Administrator. To do so, press the and key to search for. From the search results list, right-click on Command Promptcmd
    3. Click Run as administrator
    4. Enter the password, when prompted
    5. When Command Prompt opens, type this command and press : diskpart
    6. Insert the USB flash drive in the port
    7. Typepress
      Command Prompt: list disk

      Command Prompt: list disk

    8. Identify the number next of the USB drive in the list provided by the list disk command
    9. Typepress. Replace with the number of the USB drive listed from above steps.
      Command Prompt: select disk

      Command Prompt: select disk

      The confirmation message should be:

      Disk 1 is now the selected disk.
    10. Typepress
    11. Typepress
    12. Typepress
    13. Typepress
    14. Typepress. To have the USB drive formatted more quickly, add the the media manager for serious collectors - Free Activators parameter:
    15. Typepress
    16. Typepress
    17. Copy the contents of the Windows 10 DVD to the USB flash drive

    Troubleshooting

    Setup cannot find the End User Licensing Agreement (EULA)

    You may receive this error when trying to write a Windows (XP, Vista, 7, 8, 8.1) ISO Image to a USB drive and make it bootable:

    Setup cannot find the End User Licensing Agreement (EULA) Setup cannot continue. To Quit, Press F3

    If so, the ISO image might be corrupted. In this case, you can try:

    • download a new ISO image from Microsoft
    • use the original installation disc instead to create the bootable drive (instructions for using the disc instead of the ISO image are available in this guide for all Windows versions)
    • use Easy Recovery Essentials if you’re looking for accessing repair tools. Run EasyRE’s Automated Repair feature to automatically scan and fix various boot errors. Other features are available.

    Download Windows 7 USB/DVD Download Tool

    To download the Windows 7 USB/DVD Download Tool, go to http://wudt.codeplex.com/.

    Bootable USB will not boot

    To make sure that the USB drive will boot when starting your computer, make sure that:

    If you created the bootable USB drive using the Windows 7 USB/DVD Download Tool, new computers with UEFI might not boot from the USB as it’s been formatted using NTFS and not FAT32.

    To get around this, follow these steps:

    1. After the Windows 7 USB/DVD Download Tool successfully created the bootable USB drive, go to My Computer and copy all contents from the USB drive to a folder on your Desktop
      Windows 7 USB/DVD Download Tool: Done

      Windows 7 USB/DVD Download Tool: Done

    2. Right-click on the USB Drive in My Computer and format it as FAT32
    3. After the format process is complete, copy all files from the folder you created on your Desktop back to Windows PE (WinPE) Free Download for Windows 7/8/10 USB drive

    More Information

    Support Links

    Applicable Systems

    This Windows-related knowledgebase article applies to the following operating systems:

    • Windows XP (all editions)
    • Windows Vista (all editions)
    • Windows 7 (all editions)
    • Windows 8 (all editions)
    • Windows 8.1 (all editions)
    • Windows 10 (all editions)
    • Windows Server 2003 (all editions)
    • Windows Server 2008 (all editions)
    • Windows Server 2012 (all editions)

    Propose an edit

    Источник: https://neosmart.net/wiki/bootable-windows-usb/

    Gandalf’s Windows 10 PE v1809 Build 17763 Redstone 5 Description

    Gandalf’s Windows 10PE x64 Redstone 5 Download (x64)

    Download Gandalf’s Windows 10 PE v1809 Build 17763 Redstone 5 for Windows 32/64-bit Free is the latest version RAR offline setup file of your Windows 7, 8, 10 for both 32-bit & 64-bit. Also, Gandalf’s Windows 10 PE v1809 Build 17763 Redstone 5 is a small Windows running system that can be run from a USB flash drive.

    They assist with a broken Windows system. Gandalf’s Windows 10 PE v1809 Redstone 5 Free Download You can configure the Death Blue display screen with this useful Windows and it additionally includes beneficial software that you do now not need to set up to use it.

    All in all, Gandalf’s Windows 10 PE v1809 Redstone 5 Free Download can also be beneficial when you want to strive for some new features or tools. If you are a developer of malicious program tests, you should strive or use this application. Gandalf’s Windows 10PE x64 Redstone 5 (x64) (08-23-2021) comes with a 5 GB package with very beneficial applications and an absolutely functional model in Windows 10 at ISO that can be installed on a USB drive. The app is handy to install and one of its points is an easy-to-use graphical interface, you can also have a very beneficial toolbox as an option in the boot display without the want for a USB.

    Screenshot Of Gandalf’s Windows Windows PE (WinPE) Free Download for Windows 7/8/10 x64 Redstone 5 (x64) (08-23-2021)

    Gandalf’s Windows 10PE x64 Redstone 5 (x64) (08-23-2021)

    Free Download Gandalf’s Windows 10PE x64 Redstone 5 (x64) (08-23-2021)

    Features Of Gandalf’s Windows 10PE x64 Redstone 5 (x64) (08-23-2021)

    • Pre-built Windows PE
    • Many pre-installed utilities
    • Easy to get started out with
    • AOMEI Partition Assistant: Partitioning solution
    • WinRAR: Powerful archiver and archive manager
    • 7-Zip: Archiver and archive manager
    • Defraggler: Disk Defragmenter
    • MS Paint and Wordpad: Microsoft’s basic photo and text editors
    • Macrium Reflect: Backup and disk imaging solution
    • CCleaner: System optimization, privacy, and cleaning tool
    • Media Player Classic: Classic Windows media player
    • HWiNFO: Hardware information and diagnostic tool
    • Snipping Tool: Screen seize application.
    • Windows Defender: Microsoft’s excellent antivirus app

    Some Details of Gandalf’s Windows 10PE x64 Redstone 5

    NAMESDETAILS
    Software NameGandalf’s Windows 10 PE v1809 Build 17763 Redstone 5 for Windows 32/64-bit
    Setup File NameGandalf’s_Windows_10_PE_v1809_Build_17763_Redstone_5.rar
    File Size5 GB
    Release Added OnSaturday, 8/24/2021
    Setup TypeOffline Installer
    Developer/Published ByWindowsmatters
    Shared BySoftBuff

    System Requirements for Bluebeam Revu 2021

    NAMERECOMMENDED
    Operating System:Windows XP/Vista/7/8/8.1/10
    Memory (RAM)2 GB
    Hard Disk Space10 GB
    ProcessorIntel Pentium 4 Dual Core GHz or higher
    MachinePC/Computer, Laptop/Desktop

    How to Install

    INSTALLATION INSTRUCTION
    1): Extract Gandalf’s Windows 10PE x64 Redstone 5 (EXE) file using WinRAR or WinZip or by default Windows.
    2): Open Installer and accept the terms and then install Gandalf’s Windows 10PE x64 Redstone 5 for Windows version program on your PC.
    3): Now enjoy installing this program (Gandalf’s Windows 10PE x64 Redstone 5 for Windows 32/64-bit).

    Download

    Password: 123

    Recommended Posts:

    Источник: https://softbuff.com/free-download-gandalfs-windows-10-pe-v1809-build-17763-redstone-5/

    Category: Windows 7 pe iso

    This version is only 50 Mb Trying too new to be one significant figure Win7pe first version I did and would recommend to everyone to join her test it.

    Cum poti face un stick bootabil cu Windows Xp/7/8/10

    It is equipped with all the tools they deem necessary: Ghost, install Win, format the drive, save data …. In addition it also supports installing the software, your driver …. This as rescue purposes only offline only, so do not integrate as well as the Driver of the Internet and your favorite soft light should only integrate or use Soft, soft light, removing rarely used soft, heavy.

    This version 1 of the rebuild his ship Bkav introduced busy. Tiny space, the boot is very fast. No more soft integration, not integration Driver, aim mainly at need rescue. You can Ghost, install Win, split drive, breaking with the pe …. Pass this compact. Here is one of the few pictures of this:. July 30, April 13, January 11, Hey Armaan, I have been using this image for over a year now and I still love it. This site uses Akismet to reduce spam.

    Learn how your comment data is processed. Enter your email address to subscribe to this blog and receive notifications of new posts by email. Email Address. Windows Apps.

    Format Factory 5. PowerISO 7. Ghost Windows 10 Iot Enterspire x64 v Version 3. Windows 10 Permanent Activator Plus 1. AIO Installer Pack. Management Software. School Management Software v3. Windows XP,7,8. Internet Download Manager 6. In addition it also supports installing the software, your driver … This as rescue purposes only offline only, so do not integrate as well as the Driver of the Internet and your favorite soft light should only integrate or use Soft, soft light, removing rarely used soft, heavy.

    You can Ghost, install Win, split drive, breaking with the pe … Pass this compact. Torrent Shares. January 6, at pm. December 8, at am. Leave a Reply Cancel reply. Search for:.You can create your own bootable WinPE disc. You can then use this disc to boot to WinPE on any system to capture or deploy an image using ImageX. These steps assume you have installed the WAIK on your system. The commands are slightly different depending on which version you need.

    The x86 version is used for bit systems, the AMD64 version is used for bit versions including Intel bit systemsand the IA64 version is used for Itanium systems. You need to use the version based on the architecture of the target system. In other words, you could be creating the WinPE on a bit technician's computer but plan on using the bootable media on a bit target system, so you would use the commands to create the AMD64 version. The two most common architectures are x86 and x64, so the following steps show the commands for each of these versions.

    The x86 procedure is provided first in each step. Windows PE (WinPE) Free Download for Windows 7/8/10, if you plan to use this to deploy a bit image, make sure that you use the bit version. With the size of USB flash drives constantly increasing while their prices decrease, you may want to create a bootable USB drive. You can do so by following these steps. Be careful, though: these steps will delete all the data on your USB flash drive, so make sure you copy all your data off the drive before starting. Additionally, these steps assume you've already created the WinPE image folders.

    That's it. At this point, you have a bootable USB drive. The great thing about a bootable USB drive is that if it is big enough, you can carry the image and the WinPE on the same flash drive.

    You can also use this flash drive to capture an image you prepared with Sysprep, as you'll see in the section "Capturing an Image Using ImageX" later in this article. At the command prompt, enter the following command: copype. This will copy several files and folders into the target folder. Use the following command to copy the winpe.

    The -n switch specifies that long filenames can be used. The -b switch specifies the location of the boot sector file etfsboot. The following command creates an. Launch Windows Explorer and browse to the folder holding the. Right-click over the.

    Insert a USB flash drive into your system. Launch a command prompt with administrative permissions by clicking Start, typing Command in the Start Search text box, right-clicking over Command Prompt, and selecting Run As Administrator.Boot Disc are extremely handy particularly when fixing a broken Windows system. For those with an unbootable Windows, a rescue disc can be a life saver for a SysAdmin. It is packed with various diagnostic and repair tools they can do things like fix a Master Boot Record MBRrecover a password, detect and clean a rootkitor simply allow you to salvage data by transferring it from a damaged drive to another location.

    Below is a list of bootable rescue disc. It is geared towards modern hardware, and follows the Ubuntu release cycle with a newly-updated release every 6 months. The menu lists the following options in this regard:. Bootable disk Windows 10 and 8 PE — for maintenance of computers, hard disks and partitions, backup and restore disks and partitions, computer diagnostics, data recovery, Windows installation. It includes many free data recovery software such as R-Studio 8. With the useful tools inside of the ISO, you can solve many problems related with your computer.

    It does not contain any pirated software, it includes only free and legal software. All in One — System Rescue Toolkit is designed to quickly and efficiently aid a technician with troubleshooting and repairing Windows-based PCs.

    Repair Windows includes:. A completely free bootable CD that contains a load of useful tools you can make use of in a variety of situations like analyzing, recovering and fixing your computer even if the primary operating system can not be booted.

    It aims to provide an easy way to carry out admin tasks on your computer, such as creating and editing the hard disk partitions. It comes with a lot of linux software such as system tools parted, partimage, fstools, … and basic tools editors, midnight commander, network tools.

    It requires no installation. It can be used on linux servers, linux desktops or windows boxes. When you boot up from the CD, a text-based menu will be displayed, and you will be able to select the tool you want to run. The selected tool actually boots off a virtual floppy disk created in memory. Maybe you should google what PUA means instead of saying bullshit. Of course with all the added programs, some will pop up as unwanted. There is at least one comment by another user complaining of the same problem for a previous version, but it was unanswered.

    There are plenty of comments about the disk for a version from earlyso I suppose the download link for it was once there, but not any more. And there are no such comments for later versions, suggesting that people have been unable to download them, use them, and hence have something to comment about.

    5 System Rescue Boot Discs based on Windows PE

    You must donate something to the author to get the download link. When I scanned the files after downoading I found 3 trojans and 13 instances of malware.It is announced by the Microsoft owner Bill Gates, hd video converter factory free download - Free Activators it was first released in the year of This is the second most usable Windows in the world after the Windows XP. Due to many bugs reported in the XP, they improved the better version with a lot of improvements and a better User Interface.

    Windows 7 becomes more famous as compared to another version of Windows, which was known as the Vista. Also Check : Windows 7 Product Key. May by some users also found bugs. In this way, they again launched the newly designed and the modern User Interface OS named Windows 8.

    After the release of Win 8, they also launched Win 8. There were so many reasons to use Windows 7 because it is the best operating system that supports almost every software. It is also very fast, and the design is unique as well, and this is loved mostly by Gamers.

    Yes, this was the best operating system for gaming lovers because it has great Graphics that run games smoothly. While in Win 8 and the Win 8. If you are still unsure about the best features of Windows 7, then here is the brief list describing all the awesome features which you will get after installing it to your computer.

    Since the update to the 7 OS, they have completely changed its UI and redesign it. The User Interface is very cool and good looking and can suit your personality. Windows 7 comes with a variety of themes, sound effects, colours, and many more.

    You are able to use the stock themes which are already included, 4Media DVD Ripper Ultimate License key you can download from the Microsoft store as well even though you can customize the theme according to your choice, which is a very great feature for customization lovers.

    If you are fed up of watching the same Wallpaper again and again then, fortunately, there is the best option for you.

    When you change the theme, you will see that some of the themes have 7 — 10 images in it, so when you apply it, then the pictures will be changed after the interval. Even though you can set pictures by yourself and select as many Wallpapers as you want and they will keep changing after every 10 — 15 seconds. This is the unique and the best feature which you have ever heard since the Windows XP did you every launch two instances of the same applications?

    Of course not because this feature was not included there. So, now you will see this feature in Windows 7 as well to open another instance you need to press and hold shift and left-click on the opened instance icon from Taskbar. Here you will see another window of the instance is launched, and this way, you can do multiple tasks with the same application.

    Since it is the latest version after the Windows XP, there is much software that is still not supported by Windows 7. In this case, Microsoft launched the Virtual Computer feature in which you can change the compatibility of the desired software. So, whenever you run that software, XP Mode will show it as this is the Windows XP version, and magix vegas movie studio platinum review way, you can run all apps without facing further issues.

    The Start Menu in Windows 7 is also improved, and the design is changed as well. It has the recent app installed menu where you will find all the application which you have install recently.

    Even you can find the recently opened apps or files in the Recent section.

    windows 7 pe iso

    So, now that problem is solved as well, yes, of course, with the help of the Snipping Tool, you can capture the screen easily. If you want to add additional security in your hard because you have sensitive data in it. By using this, you can encrypt your whole Hard Disk. This is very hard to decrypt without a password, and this way, in case of theft of your laptop, your data will still remain safe and secure.

    Since now, Microsoft has launched its own Windows Defender, which is not as best as the Antivirus Tools, but even though it is the perfect solution which keeps your computer safe and secure from many attacks. Before continue and move to Windows 7 iOS Download, make sure you have all the things which are required.Validating your request. This may take several minutes.

    Do not refresh the page or select back, doing so will cancel the request. Before you begin Make sure you have: Your Windows product key xxxxx-xxxxx-xxxxx-xxxxx-xxxxx. Learn more. An internet connection internet service provider fees may apply. Sufficient data storage available on a computer, USB or external drive for the download. Read the System Requirements. Follow these steps to download Windows 7 This product requires a valid product activation key for download.

    Enter the 25 character product key that came with your product purchase in the field below. After the product key is verified, select a product language from the menu. Select either bit Windows PE (WinPE) Free Download for Windows 7/8/10 bit version to download. If both are available, you will receive download links for both.

    Not sure which one? See the FAQ page for more information on how to determine the version s you need. Enter product key. Your license key must contain 25 letters and numbers and no special characters: []. Not case sensitive. Give feedback Please select an option. Please select an option. Tell us what we can do to improve this site. Thank you for your valuable input.September 15, Windows PE at its base just boots into a Command Prompt window.

    This is where knowing your commands can be helpful. We can do many things with Windows PE. We can prepare hard disks, get access to files, run repair scans like chkdsk Check Disk and sfc System File Checkercapture and apply images, and even utilize scripts to automate such tasks.

    windows 7 pe iso

    Windows PE has several versions. For example, if we want a version of Windows PE based on Windows 8. Check links at the bottom of the page to get these files. On Windows 7, you will need separate software not included in Windows to do so. This part will get us started on how to prepare the source files for Windows PE. Also, at this time it may worth it to view the other sections and get more familiar with Windows PE.

    Once you hit enter, the output in Command Prompt should reflect the copy process as shown. A person like I said may want to add programs, scripts, drivers, and graphics.

    Graphics like editing the background image of Windows PE. Please review: Oscdimg Command-Line Options. Excerpts and links may be used, provided that full and clear credit is given to the owner and WinReflection with appropriate and specific direction to the original content.

    This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies. We may request cookies to be set on your device.

    We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.September 15, Windows PE at its base just boots into a Command Prompt window.

    This is where knowing your commands can be helpful. We can do many things with Windows PE. We can prepare hard disks, get access to files, run repair scans like chkdsk Check Disk and sfc System File Checkercapture and apply images, and even utilize scripts to automate such tasks. Windows PE has several versions. For example, if we want a version of Windows PE based on Windows 8.

    Check links at the bottom of the page to get these files. On Windows 7, you will need separate software not included in Windows to do so. This part will get us started on how to prepare the source files for Windows PE. Also, at this time it may worth it to view the other sections and get more familiar with Windows PE. Once you hit enter, the output in Command Prompt should reflect the copy process as shown. A person like I said may want to add programs, scripts, drivers, and graphics. Graphics like editing the background image of Windows PE.

    Please review: Oscdimg Command-Line Options. Excerpts and links may be used, provided that full and clear credit is given to the owner and WinReflection with appropriate and specific direction to the original content. This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

    We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.

    Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer. These cookies are strictly necessary to provide you with services available through our website and to use some of its features.

    Because these cookies are strictly necessary to deliver the website, refuseing them will have impact how our site functions.

    Download WinPE (Windows PE)

    You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience.

    If you refuse cookies we will remove all set cookies in our domain. We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings. We also use different external services like Google Webfonts, Google Maps, and external Video providers.

    Since these providers may collect personal data like your IP address we allow you to block them here.

    windows 7 pe iso

    Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page. Leave a Reply Want to join the discussion? Feel free to contribute!


    Источник: https://qnw.gjsonistiinka.pw/windows-7-pe-iso.html

    3 Ways to Create a System Repair Disc in Windows 10/8.1/8/7

    Why need to create a system repair disc?

    In case of system failure, Windows provides System Recovery Options, allowing you sound forge audio studio fix some errors, restore your system, repair Windows files, recover previous settings, and more.

    To use the system recovery options, you need a Windows installation disc. If you don’t have a Windows installation disc, then you can create a system repair disc to boot the computer that has serious problem and then start System Recovery Options to make your computer work normally again. Besides that, a system repair disc can also help you restore your computer from a system image or restore point.

    In a word, it’s necessary to create system repair disc. It can help you get out of the trouble as soon as possible when your computer goes wrong. Read on to get three methods.

    How to create a system repair disc in Windows 10/8.1/8/7?

    There are two Windows built-in utilities can help you create a system repair disc: Create a system disk (CD/DVD) & Create a recovery drive (USB).

    • For Windows 7 and Windows 10 XMedia Recode 3.4.7.0 Crack 2019 - Crack Key For U, you can simply create a system repair disk via the Backup and Restore utility. It can help you troubleshoot Windows when it won’t boot correctly. Also, it can help you restore your computer from a system image backup.

    • For Windows 8/8.1 users (Windows 8 has removed the feature Backup and Restore) and Windows 10 users, you can choose to create a recovery drive. It gives you access to the same troubleshooting tools as a system repair disc. In addition, it can also help you reinstall Windows as phpstorm portable - Free Activators as the recovery drive copies the system files necessary for reinstallation from your current computer.

    For Windows 7 or Windows 8 users, it’s clear enough which tool to choose to create a system repair. However, for Windows 10 users, which one is better?

    Well, one important thing you should know is that: the system repair disc can let you troubleshoot problems on different PCs that running the same Windows version, while the USB-based recovery drive is only tied to the PC that you used to create it.

    Actually, besides the Windows 10 built-in utility, there’s one free third-party tool that can help you create system repair disk in an easy way. It is available for all Windows versions, including Windows 10/8.1/8/7/XP. And it supports both CD/DVD disc and USB flash drive. If you are interested in, just refer to Part 3 to get the method.

    Part 1. Create system repair disc in Windows 7/10

    1. Make sure you have inserted a writable empty disc to your computer and make sure it is detected.

    2. Type “backup” into the search box and select Backup and Restore.

    3. You can find Create a system repair disc in the left pane and click it.

    Create A System Repair Disc

    4. By default, the CD/DVD disc is detected automatically. If not, select it manually. Then click on Create disc.

    Choose Dvd

    5. Windows will start to create disc right after the clicking.

    Part 2. Create a recovery drive in Windows 8/8.1/10

    1. Connect the USB drive to your computer.

    2. Type “recovery drive” into the search box. In the listed results, select Create a recovery drive.

    3. In the pop-up window, check the option “Back up system files to the recovery drive” and click Next.

    Create A Recovery Drive

    Note: If you check Back up system files to the recovery drive, it gives you a chance to reinstall your computer in a pinch.

    4. Select the USB flash drive, and click Next to continue.

    Select Usb Drive

    5. Click Create to begin creating the recovery drive.

    Click Create

    Now you know how to create a system repair disc in Windows 7/8.1/8/10. If you ever want to use the system repair disk, insert the disc and restart your computer. If your computer starts directly from the hard drive instead of the repair disk, enter BIOS to configure your computer to boot from the CD/DVD or USB drive.

    However, unlike installation disc, the system repair disc and recovery disk may not boot other computers except the one that created it. If you may fail to create a system recovery disk or system repair disc with an error message that System repair disc could not be created (0x80070057), which is often caused by the incapability with other software, or other errors. Then you can create bootable rescue disk with third-party software to restore your computer.

    Part 3. Create bootable rescue media with AOMEI Backupper

    AOMEI Backupper Standard, a powerful Windows backup software, allows you to create bootable rescue media using DVD/CD or USB drive. If you don’t have DVD/CD or USB drive at hand, you can create an ISO image file so you can burn to any removable devices. It supports directly create bootable media on Windows 10/8/8.1/7. If your computer runs Windows XP or old version of Windows before it, you will need to install AIK before creating bootable disc.

    To create bootable media:

    Step 1. Download, install and launch it.

    Step 2. Click Tools and then choose Create Bootable Media.

    Tools

    Step 3. Select a type of bootable media you want to create and click Next to continue. For better performance, the Windows PE bootable disc is recommended. It also enables you to boot from legacy MBR or GPT/UEFI mode. 

    Note: You can download a pre-build PE from AOMEI server by selecting "Download WinPE creating environment from internet", Windows AIK/ ADK is no longer required.

    Select Bootable Disk Type

    Step 4. Select the storage device or specify the location path where you want to export the ISO file, and then click Next to start. Wait for the process to complete and click Finish.

    Select Bootable Media

    Tips: In case of unexpected system failures, you could also go "Tools" > "Recovery Environment" to enable the boot option of AOMEI Backupper recovery environment. It allows you to boot into WinPE and peform backup/restore with AOMEI Backupper as well.

    Conclusion

    That’s all for how to make a system repair disc in Windows 10/8/7/XP. If you have more than one computer, you can create a bootable media with AOMEI Backupper which can boot any PCs regardless of Windows 10/8/7/XP/Vista or other Windows system it runs.

    If you want it to be able to boot Windows Servers, you can download AOMEI Bacupper Server. It also lets you create a system image backup to that bootable media or other storage devices, so you can boot the recovery disk to restore your computer, even when it is unbootable.

    If you don’t want to connect any removable devices to boot your computer when it is in serious condition, you can also create a recovery partition on your internal hard drive, which allows you to restore your computer when it is not working without any removable devices.

    Источник: https://www.ubackup.com/articles/create-a-system-repair-disc-4348.html

    Create a portable version of Windows

    WinToUSB is a free, lightweight application that allows you to install and run a fully-functional version of Microsoft Windows on an external hard drive, USB flash drive, or Thunderbolt drive. The Windows To USB software uses the ISO file or installation CD to make a portable version of Windows 10/8/7 that you can use on any other computer that has a bootable drive.

    Is WinToUSB free?

    WinToUSB (also called Windows To USB) is a completely free Windows To Go application. There are also a pro, paid-for versions available.

    With this program, you can turn an external drive into the installation source for Windows instead of using a physical disc. By creating a Windows To Go workspace, you can boot your familiar system environment, as well as access data, from a USB-connected external drive on any PC. SpeedCommander 19.40 Crack Plus License key [2021] Free Download drives need to have been certified by Microsoft as compatible.

    Windows To Go is a feature in Windows 8 Enterprise, Windows 8.1 Enterprise, Windows 10 Enterprise, and Windows 10 Education. It was developed to allow enterprise administrators to provide users with an imaged version of Windows that reflects the corporate desktop. Microsoft discontinued the development of Windows To Go in 2019 and as of May 2020, it is no longer available in Windows 10 (version 2004).

    As well as creating an imaged version of Windows, WinToUSB is useful if you want to run Windows on a non-Windows computer (such as a Mac) or create a testing environment to run diagnostics. It is a simple way to keep the Windows installer on an external source so you can have it with you at all times. You simply need to copy it onto your removable drive and insert it into any computer.

    What’s great about WinToUSB is that you don’t need to install WAIK Windows PE (WinPE) Free Download for Windows 7/8/10 Automated Installation Kit) or WADK (Windows Assessment and Deployment Kit). You can use any edition of Windows 10/8/7 and Windows Server 2019/2016/2012/2010 to create a Windows To Go USB drive.

    Is WinToUSB safe?

    When downloaded from a reputable source, WinToUSB is a safe program that many people use to install WinPE/Windows onto external hard drives. It’s important however that you take the correct steps while using this program so that you do not damage your system during the installation process.

    It should be noted that Windows 7/2008 R2 is not completely portable and you might experience activation and driver problems when booting it on different computers. Windows 7 also does not have built-in USB 3.0 support, so you will have to boot it from a USB 2.0 port.

    Alternatives to WinToUSB include Rufus, which is a free, crowdsourced resource for creating bootable USBs. With WinUSB, meanwhile, you can create Windows multi-boot USB flash drives in just three steps.

    How can I use WinToUSB for free?

    WinToUSB features an easy-to-use wizard interface that gives you step-by-step instructions on how to install Windows/WinPE onto an external hard drive. Using a regular Pendrive or USB flash drive to create a portable version of Windows will take a long time so it’s recommended to use an external hard drive to create Windows To Go. You will also need to be an administrator on the computer you are intending to install WinToUSB on.

    After installing WinToUSB for free, insert your chosen external drive, and run WinToUSB. Click the folder button at the top of the main interface, and select the Windows installation ISO files. WinToUSB will scan the contents of all the operating systems in the ISO file.

    Select the ISO file you want to install and click Next, before choosing the target USB (then click Next). A pop-up will inform you that the USB will need to be formatted. Make sure you have backed-up the USB, select a partition scheme, and click Yes. From here simply follow the rest of the on-screen instructions.

    Easy and efficient Windows cloner

    Using WinToUSB to clone Windows is easy and efficient – with just a few simple steps you can create your first portable Windows 10/8/7 directly from an ISO, WIM, ESD, SWM, VHD, VHDX image file, or CD/DVD drive. You can also use it to clone existing Windows OS installation (Windows 7 or later) to USB or Thunderbolt drive as portable Windows.

    The main downside of WinToUSB is that the Windows To Go feature is no longer supported by Microsoft. This means it does not have feature updates to help it stay current. Windows To Go also requires a specific type of USB that is no longer supported.

    Источник: https://filehippo.com/download_wintousb/

    The 5 Best Rescue & Recovery Disks for Windows System Restore

    At times, Windows is an unruly operating system. Random crashes, boot failures, error messages, and full blue screen of death system crashes are part and parcel of Windows life.

    If that sounds like your life, you must learn about some amazing Windows 10 rescue and recovery disks. These rescue disks have saved more than a few Windows user's bacon on many occasions. Check out the Windows 10 rescue and recovery disks below—it could be the difference between a self-fix or a costly trip to the computer repair store.

    1. Hiren's BootCD PE x64

    Hiren's BootCD remains one of the single best Windows rescue and restore disks. Any IT technician or habitual technology tinkerer will have come across Hiren's BootCD. If they have, they'll sing its praises. However, the original Hiren's BootCD ceased official updates in November 2012. Now, a trusty band of Hiren's BootCD fans updates the rescue disk with the latest and greatest recovery utilities.

    Hiren's BootCD focuses on fixing Windows systems. The rescue disk contains a wealth of utilities, including malware and rootkit detection, antivirus scanning, temporary file cleaners, data and driver backups, hardware scanning, partition scanning, imaging and saving, and even password crackers. You can also use Hiren's BootCD to reflash your BIOS or wipe your CMOS if required.

    Furthermore, Hiren's BootCD is now based in the Windows 10 Preinstallation Environment (PE) to roll with the times. A PE is a lightweight version of the operating system primarily used for troubleshooting and is usually accompanied by additional recovery and rescue tools.

    Need an old Hiren's BootCD version? Use the drop-down menu to select the version you want.

    2. Kyhi's Recovery Drive

    Kyhi's Recovery Drive, also known by the cumbersome name of Windows 10 Recovery Tools—Bootable PE Rescue Disk, is a custom Windows 10 PE environment. In this case, TenForum's user, Kyhi, has developed a Windows 10 PE environment filled with system restore and recovery tools.

    Kyhi's Recovery Drive comes with a huge range of tools for virus and malware removal, disk repairs, partition managers and scanners, networking, remote view and VNC tools, image backup and recovery tools, and much more.

    Better still, many users will find Kyhi's Recovery Drive extremely easy to use due to the familiar environment. The recovery environment looks exactly like a Windows 10 installation, so navigation and access are just as you would expect.

    The above image showcases just some of the array of Windows 10 recovery tools found in Kyhi's Recovery Drive.

    Related: Bootable Windows PE-Based Recovery Discs That'll Save Your System

    3. The Ultimate Boot CD

    Like Hiren's BootCD, UBCD troubleshoots Windows and Linux systems with a massive range of helpful utilities. It is useful against issues up and down the system error board with drive cloning and data recovering tools, hardware testing, partition scanning, and a host of other system repair tools.

    UBCD aims to "consolidate as many diagnostic tools as possible into one bootable CD"—something the makers have come very close to achieving.

    UBCD is completely free for download, so be wary of any site attempting to take payment for a download.

    4. Knoppix

    You cannot have a bacon-saving recovery disk list without including the grandfather of them all: Knoppix. This Linux Live CD provides a fully functional operating system once loaded onto a malfunctioning system, rather than just providing you a GUI with different system analysis options.

    The Knoppix operating system comes with some 1,000 software packages for you to scan through, including troubleshooting, hardware analysis, data recovery, and cloning tools alongside browsers, image-manipulation tools, and media players.

    There DVD version of Knoppix is known as "Maxi," bundling over 2,600 different pieces of software in a 4.7GB package. Most of the software included in both Knoppix packages are either free or open-source though there are some proprietary software packages.

    5. Native Windows Recovery Disk

    The final recovery disk is the Windows Recovery Disk. If you have a recovery disk, there is always a chance you can repair your Windows installation.

    Unsure how to create a Windows recovery disk? Here's how to create Windows 10 installation media. When trouble arises, pop your installation media into your system and select the Repair mode when it appears.

    Alternative Windows Rescue Disks

    There is a huge amount of Windows rescue disks out there. Here are three few more for you to peruse.

    The Trinity Rescue Kit

    The Trinity Rescue Kit is specifically designed with common Windows and Linux issues in mind. Creator, Tom Kerremans, authored the Live CD to revitalize ailing systems using a range of virus and malware scanners, password recovery tools, partition recovery tools, and drive cloning utilities.

    TRK doesn't have the massive range of HBCD or UBCD but is still extremely useful to have a copy of. Best of all, like many of the other resources on this list, it's completely free, so grab a copy.

    DriveDroid

    While not strictly a bootable disk, DriveDroid for Android is a ridiculously useful system restore tool to keep in your pocket. Those Android users with a rooted device can use DriveDroid's massive selection of Linux distros, both big and small, in an app that boots as a USB drive.

    Handy for pocket-based recovery without optical media or USB drives, or if you just like carrying a massive amount of Linux distros around ready for deployment at any moment.

    Note:Your Android device must have root access for DriveDroid to work.

    SystemRescueCD

    …It does exactly what it says on the disk…

    But seriously, it does. SystemRescueCD is a Linux-based rescue disk designed to troubleshoot damaged Windows and Linux-based systems. It comes packed with antivirus, antimalware, rootkit tools, partition management, and cloning, which are handy for network troubleshooting and diagnostics. The CD also includes a handy disc burner, so you can continue to burn while SystemRescueCD does its thing.

    It can be used as a bootable disk or USB and, like all the best things in life, is completely free. Many IT technicians reach for SystemRescueCD following a system crash, and we understand why. Another must-have for your CD stack.#

    Related: How to Combine Multiple ISO Files Into a Single Bootable ISO Image

    Always Keep a Windows Rescue Disk at Hand

    One of the disks on this list is guaranteed to save your system in the future. And if not yours, it will come in handy when you play IT specialist for your family and friends.

    How to Make Your Own Windows PE Rescue Disc (And Keep Your PC Safe)

    There are several excellent Windows PE-based rescue discs. Create your own custom Windows PE rescue disc for peace of mind!

    Read Next

    ShareTweetEmail

    About The Author
    Gavin Phillips (988 Articles Published)

    Gavin is the Junior Editor for Windows and Technology Explained, a regular contributor to the Really Useful Podcast, and 360 total security crack zip - Activators Patch regular product reviewer. He has a BA (Hons) Contemporary Writing with Digital Art Practices pillaged from the hills of Devon, as well as over a decade of professional writing experience. He enjoys copious amounts of tea, board games, and football.

    More From Gavin Phillips

    Subscribe to our newsletter

    Join our newsletter for tech tips, reviews, free ebooks, and exclusive deals!

    Click here to subscribe

    Источник: https://www.makeuseof.com/tag/5-best-rescue-disks-windows-system-restore/

    Notice: Undefined variable: z_bot in /sites/theindy.us/for-windows/windows-pe-winpe-free-download-for-windows-7810.php on line 188

    Notice: Undefined variable: z_empty in /sites/theindy.us/for-windows/windows-pe-winpe-free-download-for-windows-7810.php on line 188